Saltwater Eddies, LLC | Water Purifiers http://www.saltwatereddies.com/ Fri, 25 May 2012 10:09:34 -0500 en PhosBan Reactor 550 from Two Little Fishies. Rated for up to 600 gallon aquariums. The PhosBan Reactor 550 is designed with the upflow principle to achieve the most efficient use of PhosBan or other chemical filter media. By pushing water from PhosBan Reactor 550 from Two Little Fishies. Rated for up to 600 gallon aquariums. The PhosBan Reactor 550 is designed with the upflow principle to achieve the most efficient use of PhosBan or other chemical filter media. By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, and prevents channeling. It can be mounted hanging on the back of the aquarium or below the aquarium. Includes ball valve for regulating flow, and flexible connection fittings that rotate 180 degrees to allow a perfect custom fit to your installation. Large 750g media capacity. The threaded lid design makes servicing quick and easy. Shipment Dimensions: * Weight: 2.2 lb * Height: 16 in * Width: 7 in * Depth: 5.5 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1454/phosban_reactor_550.html http://www.saltwatereddies.com/images/products/phosban_reactor_b.jpg http://www.saltwatereddies.com/content-product_info/product_id-1454/phosban_reactor_550.html Two Little Fishies PhosBan Phosphate Removal Media 454 g Information Product Manuals & Documentation PhosBan from Two Little Fishies is a favored chemical filter media because it will not leach substances back into your aquarium. Largest adsorption capacity of any phosphate filtering media. Ferric oxide hydroxide-based granules also adsorb organics and other pollutants. Use just like activated carbon; filter bag included. Non-toxic and lasts several months in typical aquariums. Great for saltwater and freshwater aquariums. For best results, use with a TLF Phosban Reactor 150 or 550. * Phosphate removing filter media permanently removes phosphate * Non-toxic filter media lasts several months in typical aquariums * Great for both saltwater and freshwater aquariums * Directions: PhosBan can be rinsed briefly before use, but since it is friable, do NOT stir the granules, which would pulverize them. Put PhosBan in a tightly-packed media bag or between two layers of fine filter floss in any kind of flow-through filter or filter chamber so that the water is directed through it diffusely. PhosBan is best used in an up-flow filter such as the PhosBan Reactor, but the flow must be reduced sufficiently to prevent the granules from tumbling, which would grind them into powder. * Recommended Usage: 50 g per 50 gal (200 l) saltwater, 50 g per 100 gal freshwater. PhosBan is safe and can be used at more than 5 times the recommended usage quantity, but at high dosages, it can cause a drop in alkalinity. Monitor alkalinity and correct if necessary with buffer or other alkalinity supplements. The useful life of PhosBan depends on the phosphate concentration in the aquarium. PhosBan can be effective for up to several months before it needs to be changed. Replace PhosBan when phosphate levels begin to rise. * Contents: Synthetic ferrous oxide hydroxide. 150 gram jar is 0.33 lb, includes a filter bag, and treats 150 gallons. 454 gram jar is 1 lb, includes a filter bag, and treats 450 gallons. 1,200 gram bulk size includes filter bag and treats up to 1,200 gallons. Shipment Dimensions: * Weight: 0.45 lb * Height: 4 in * Width: 3.9 in * Depth: 3.9 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2640/phosban_phosphate_removal_media_454_g_two_little_fishies.html http://www.saltwatereddies.com/images/products/PhosBan454-g-1.jpg http://www.saltwatereddies.com/content-product_info/product_id-2640/phosban_phosphate_removal_media_454_g_two_little_fishies.html Two Little Fishies PhosBan 150g Julian Sprungs Marine Aquarium Formula Synthetic ferric oxide hydroxide granules with an extremely high capacity for adsorbing phosphate from saltwater and freshwater. Also adsorbs silicate, and does not release absorbed substances. Recommended by Julian Sprung for long lasting and easy control of phosphate levels on a permanent basis. Media bag included. Specifications 150 grams will treat up to a 150 gallon tank for several months (depending on the phosphate level). Replace when phosphate levels start to rise. Media bag included. Two Little Fishies, Inc. was founded in 1991 to promote the reef aquarium hobby with its introductory video and books about reef aquariums. The company now publishes and distributes the most popular reef aquarium reference books and identification guides in English, German French and Italian, under the d.b.a. Ricordea Publishing. Since its small beginning, Two Little Fishies has also grown to become a manufacturer and importer of the highest quality products for aquariums and water gardens, with international distribution in the pet, aquaculture, and water garden industries. Two Little Fishies? product line includes trace element supplements, calcium supplements and buffers, phosphate-free activated carbon, granular iron-based phosphate adsorption media, underwater bonding compounds, and specialty foods for fish and invertebrates. Two Little Fishies also offers beautifully engineered plastic fittings used for air and water plumbing in aquariums, water gardens and paludariums. It is our company mission to manufacture and distribute products of the finest quality that are simple, elegant, practical, and useful. By providing these intelligent solutions and publishing the latest information about how to build successful and beautiful aquariums, we enhance everyone?s enjoyment of their aquatic hobby. This way we build a following of happy successful customers. Shipment Dimensions: * Weight: 0.45 lb * Height: 4 in * Width: 3.9 in * Depth: 3.9 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1456/phosban_phosphate_removal_media_150g.html http://www.saltwatereddies.com/images/products/Phosban.jpg http://www.saltwatereddies.com/content-product_info/product_id-1456/phosban_phosphate_removal_media_150g.html PhosBan Phosphate Adsorption Media - 1200 g Synthetic ferric oxide hydroxide granules with an extremely high capacity for adsorbing phosphate from saltwater and freshwater. Also adsorbs silicate, and does not release absorbed substances. Recommended by Julian Sprung for long lasting and easy control of phosphate levels on a permanent basis. Media bag included. Specifications 150 grams will treat up to a 150 gallon tank for several months (depending on the phosphate level). Replace when phosphate levels start to rise. Media bag included. Two Little Fishies, Inc. was founded in 1991 to promote the reef aquarium hobby with its introductory video and books about reef aquariums. The company now publishes and distributes the most popular reef aquarium reference books and identification guides in English, German French and Italian, under the d.b.a. Ricordea Publishing. Since its small beginning, Two Little Fishies has also grown to become a manufacturer and importer of the highest quality products for aquariums and water gardens, with international distribution in the pet, aquaculture, and water garden industries. Two Little Fishies? product line includes trace element supplements, calcium supplements and buffers, phosphate-free activated carbon, granular iron-based phosphate adsorption media, underwater bonding compounds, and specialty foods for fish and invertebrates. Two Little Fishies also offers beautifully engineered plastic fittings used for air and water plumbing in aquariums, water gardens and paludariums. It is our company mission to manufacture and distribute products of the finest quality that are simple, elegant, practical, and useful. By providing these intelligent solutions and publishing the latest information about how to build successful and beautiful aquariums, we enhance everyones enjoyment of their aquatic hobby. This way we build a following of happy successful customers. California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2558/phosban_phosphate_adsorption_media_1200_g.html http://www.saltwatereddies.com/images/products/phosban-1200-g.jpg http://www.saltwatereddies.com/content-product_info/product_id-2558/phosban_phosphate_adsorption_media_1200_g.html 57 Watt Aqua UV Replacement Lamp for UV Sterilizer Information Product Highlight(s): OEM replacement for Aqua UV sterilizers Recommended replacement every 12 months Replacement part # A20057 Lamp Length: 17 1/2 inch 57 Watt Aqua UV Replacement Lamp for UV SterilizerReplacement UV Lamp for 57 watt Aqua Ultraviolet Sterilizer. Manufacturer Info Aqua Ultraviolet Aquarium Supplies Aqua Ultraviolet, founded in 1975, is a popular manufacturer of ultraviolet sterilizers and bio-mechanical filtration. All Aqua Ultraviolet (also referred to as Aqua UV) products are created, tested and manufactured in their Temecula, CA headquarters. By creating all of their products in-house, Aqua Ultraviolet can perform thorough quality control and even engineer custom designs for special orders. The customer-centric company has a toll-free number with a friendly support staff willing to help you choose the right products and walk you through the installation process. Aqua Ultraviolets UV sterilizers are popular among freshwater and saltwater aquarium hobbyists in addition to pond and water gardeners. California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2634/replacement_aqua_uv_57w_bulb.html http://www.saltwatereddies.com/images/products/57-Watt-Aqua-UV-Replacement-Lamp.jpg http://www.saltwatereddies.com/content-product_info/product_id-2634/replacement_aqua_uv_57w_bulb.html Monster Protein Skimmers by Rk2 Systems for 1500 gallons + If you have a 1500 gallon or more tank, we would highly recommend a 25PE RK2 skimmer by Rk2 Systems. RK2 manufactures protein skimmers for public aquariums, universities and large salt water systems. An RK2 unit is an excellent choice as it is made in USA and if there are ever any problems, parts and service are easily available. The RK2 skimmers can be used alone or can also be paired up with ozone. Ozone is expensive, and so this can always be added at a later date. RK2 model 25PE-FS filtration system with RK25PE protein skimmer & Fluidized Sand Filter. 2 inch Union Sch. 40 intake connection. 3 inch PVC SCH40 SLIP TEE outlet connection. Includes feed pump and dedicated venturi pump. Feed pump 115/230 V 3.0/1.5 Amp TEFC 1 Ph. Dedicated Venturi pump 1.55 A Max @ 115V 60 Hz. 1 Ph. Unit mounted on one stand alone filtration skid. 80 inches overall height. Footprint: 24 inches x 30 inches. Protein Skimmer reaction chamber HDPE custom molded at 14 inches in diameter. Fluidized Sand Filter Dimensions: 6 inch Diameter .250 inch thick CLEAR ACRYLIC x 72 inches tall. Fluidized Sand Filter has 0.5 Cu. Ft. Media Capacity. Rinse system connection 3/4 inch PVC SCH80 SLIP UNION. Shipment Dimensions: * Weight: 280 lb * Height: 120 in * Width: 48 in * Depth: 44 in CALL OR EMAIL FOR SHIPPING QUOTE. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1935/rk2_model_25pe_fs_filtration_system.html http://www.saltwatereddies.com/images/products/RK2_25pe-Fs_protein_skimmer_filter_system.jpg http://www.saltwatereddies.com/content-product_info/product_id-1935/rk2_model_25pe_fs_filtration_system.html Premium Bulk Activated Carbon 70 C.T.C. 4.00 MM pelletized. 55 lb. sack. Excellent choice for either saltwater or freshwater aquarium filtration and removal of organics and odors. Shipment Dimensions: * Weight: 57 lb * Height: 24 in * Width: 12 in * Depth: 12 in WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2096/55_lb_sack_coal_pelletized_activated_carbon_4mm.html http://www.saltwatereddies.com/images/products/Picture of Carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2096/55_lb_sack_coal_pelletized_activated_carbon_4mm.html Coal Base Granular Activated Carbon: CTC 60. Please select a mesh size from drop down selection. At this price are the 4x8, 6x10, 8x30, 12x40 and 20x50 mesh sizes COL-AG 60 is a highly active Granular Activated Carbon (GAC) manufactured from selected grades of Bituminous Coal. Available in industry standard 4x8 mesh sizes, these high quality carbons provide extraordinary surface area, fine pore structure, high density and superior hardness. TYPICAL PHYSICAL PROPERTIES / SPECIFICATIONS Total Surface Area (BET), m2/gm 900 - 1000 Iodine Number, mg/gm. 900 - 1000 CCl4 Activity, Min. (ASTM D-3467) 60 Apparent Density (ASTM D-2854), g/cc 0.45 - 0.50 lb/ft3 28 - 31 Hardness, Min. (ASTM D-3802) 98 U.S. Standard Sieve Size 4 x 8 Larger than No. 4, Max. 15% Smaller than No. 6, 8, or 10, Max 5% Moisture, Max. (ASTM D-2867) 3% STANDARD PACKAGING: 27.5 or 55 Lb. Poly Lined Polypropylene Bags and 1,100 Lb. Super Sacks. Optional Packaging 200 to 220Lb. Fiber Drums PLEASE CALL OR EMAIL FOR QUOTE ON THESE LARGER AND DRUMMED ORDERS. OTHER MESH SIZES AVAILABLE: 4X6, 4X10, 8X16X, 12X40, 20X50, 50X200, 80X325 Shipment Dimensions: * Weight: 30 lb * Height: 24 in * Width: 12 in * Depth: 12 in All Grades Available: Coconut Shell 4X6, 4X8, 4X10, 6X12, 6X16, 8X16, 8X30, 12X30, 12X40, 20X50, 30X60, 50X200, 80X325, and -325 Pelletized Coconut Shell 4.00mm and Special Non Impregnated High Capacity H2S Coal Base Granular 4X6, 4X8, 4X10, 6X10, 8X16, 8X30, 12X40, 20X50, 50X200, 80X325, and -325 Pelletized Coal Base 1.5mm, 2mm, 3mm, 4mm, Impregnated 4mm, and Special Non Impregnated High Capacity H2S Coconut Shell & Coal Base Water Washed and Acid Washed 8X30, 12X40, 20X50 Coal Base Impregnated 4X6, 4X8, 4.0mm Silver Impregnated 12X40, 20X50 Standard Packaging: 27.5lb., 55lb., 1,100lb. Poly lined Polypropylene Bags. Also available in 220lb. Fiber Drums WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2604/27_5_lb_sack_premium_ctc60_granular_activated_carbon_gac.html http://www.saltwatereddies.com/images/products/Picture of Carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2604/27_5_lb_sack_premium_ctc60_granular_activated_carbon_gac.html TYPE - CL-PA60 : COAL BASE PELLETIZED ACTIVATED CARBON IS MADE FROM A SELECTED GRADE OF BITUMINOUS COAL. ADSORPTION APPLICATIONS, INCLUDING ROOM AIR PURIFIERS, ODOR CONTROL SYSTEMS, INDUSTRIAL AIR CLEANING SYSTEMS, AQUARIUM WATER PURIFICATION AND V.O.C ADSORPTION SYSTEMS, ETC. COL-PA 60 is a highly active Pelletized Carbon manufactured from selected grades of Bituminous Coal to provide high density and superior hardness. COL-PA 60 is designed for use in a wide variety of air purification and vapor phase applications. Available in industry standard 4mm size, pelletized COL-PA 60 provides reduced pressure drop as shown below. In addition, the extraordinary surface area and fine pore structure of COL-PA 60 offers excellent adsorption capacity, making it a popular choice for Freshwater Aquarists and Saltwater Reef Keepers alike. TYPICAL PHYSICAL PROPERTIES / SPECIFICATIONS Particle Sizes: 3mm and 4.00 mm Total Surface Area (BET), m2/gm 900 - 1000 Iodine Number, mg/gm. 900 - 1000 CCl4 Activity, Min. (ASTM D-3467) 60 Butane Activity, Min (ASTM D5742) 23 Apparent Density (ASTM 2854), g/cc 0.44 0.48 lb/ft3 27.5 - 30 Hardness Min,. (ASTM D-3802) 98 Moisture, Max. (ASTM D-2867) 3% Ash, max. (ASTM D2866-94) 10% STANDARD PACKAGING: 27.5 or 55 Lb. Poly Lined Polypropylene Bags and 1,100 Lb. Super Sacks. Optional Packaging 200 to 220Lb. Fiber Drums PLEASE CALL OR EMAIL FOR QUOTE ON THESE LARGER AND DRUMMED ORDERS. Shipment Dimensions: * Weight: 30 lb * Height: 24 in * Width: 12 in * Depth: 12 in WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2598/27_5_lb_sack_premium_bulk_activated_carbon_4mm.html http://www.saltwatereddies.com/images/products/Picture of Carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2598/27_5_lb_sack_premium_bulk_activated_carbon_4mm.html 25 Lb. Sack Premium-PRO Bulk Activated Carbon Premium-Pro Bulk Activated Carbon 70 C.T.C. 25 lb. sack. 3% moisture maximum. 10% ash maximum. These highly activated Pellets are 4-5mm in diameter, with lengths of 5-10mm. Perfect for canisters or filter bags. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2428/25_lb_sack_premium_pro_bulk_activated_carbon.html http://www.saltwatereddies.com/images/products/55lbs_act_carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2428/25_lb_sack_premium_pro_bulk_activated_carbon.html Premium Bulk Activated Carbon 70 C.T.C. 4.00 MM pelletized. 27-1/2 lbs. Shipment Dimensions: * Weight: 27.5 lb * Height: 24 in * Width: 15 in * Depth: 5 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1561/premium_bulk_activated_carbon_27_5_lb.html http://www.saltwatereddies.com/images/products/55lbs_act_carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-1561/premium_bulk_activated_carbon_27_5_lb.html Premium Bulk Activated Carbon 70 C.T.C. 4.00 MM pelletized. 55 lb. sack. Excellent choice for either saltwater or freshwater aquarium filtration and removal of organics and odors. CALL OR EMAIL FOR QUOTE WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2597/1100_lb_poly_sacks_premium_activated_carbon_4mm.html http://www.saltwatereddies.com/images/products/Picture of Carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2597/1100_lb_poly_sacks_premium_activated_carbon_4mm.html Premium Bulk Activated Carbon 70 C.T.C. 4.00 MM pelletized.220lb drum. Excellent choice for either saltwater or freshwater aquarium filtration and removal of organics and odors. CALL OR EMAIL FOR QUOTE WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2596/220_lb_drum_premium_bulk_activated_carbon_4mm.html http://www.saltwatereddies.com/images/products/Picture of Carbon.jpg http://www.saltwatereddies.com/content-product_info/product_id-2596/220_lb_drum_premium_bulk_activated_carbon_4mm.html 1 cubic foot bulk activated carbon. Use activated carbon to filter out color and odors from aquarium water. May also be used on freshwater. wt. 35 lbs California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1866/bulk_activated_carbon_35_lbs.html http://www.saltwatereddies.com/images/products/Bulk_activated_carbon_ft3.jpg http://www.saltwatereddies.com/content-product_info/product_id-1866/bulk_activated_carbon_35_lbs.html Replacement 4 lbs. activated carbon in a 10 by 14 inch nylon mesh bag. Shipment Dimensions: * Weight: 4.2 lb * Height: 8 in * Width: 7.9 in * Depth: 4 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1560/4_lbs_activated_carbon_in_10_by_14_nylon_mesh_bag.html http://www.saltwatereddies.com/images/products/Activated_Carbon_4_Bag.jpg http://www.saltwatereddies.com/content-product_info/product_id-1560/4_lbs_activated_carbon_in_10_by_14_nylon_mesh_bag.html Tunze Classic DOC Protein Skimmer 9210 Information The skimmers of the Classic DOC skimmer model series operate according to the horizontal rotation principle of the first generations, supplemented with the newly developed air production of the Hydrofoamer. Despite its very small structural shape, this unit has an excellent skimming performance, and is especially suitable for breeding tanks with living plankton. Classic DOC skimmer models can be used in sumps and tolerate water level variation of +/- 20mm (0.78") without readjustment of the air output. Skimmer cup and foam reactor are one unit in all TUNZE Classic DOC skimmers. Delivery condition: Ready for mounting with holding device for vertical panes and horizontal glass tops up to 19mm (0.74 in). For tanks with a thicker rim, a Tunze Holder Extension M5x55mm, 3000.244 (TZ1531) is needed. General Information In 1963, TUNZE developed the first series-produced protein skimmer with its own air production. In this rotating Venturi skimmer, the hard water jet of a pressure pump is used to produce a constant fine mixture of air bubbles, which is passed into an easy-to-clean skimmer cup by means of an effective removal system. An integrated contact pipe is used to remove protein particles from the water. The refill from the aquarium then is drawn in automatically by means of the so-called molecular compensation pressures (diffusions). This TUNZE invention of contact-skimming makes sure that no living plankton is drawn into the pump circulation. Specifications: * Recommended for aquariums up to 1,000 liters (264 gal) * Dimensions: 11"L x 6.1"W x 9.2"H * Installation Depth: Approximately 2.3" to 3.5" * Air capacity: 650 l/h (171 gal./h) * Power consumption: 21W How do you select the right DOC skimmer for your marine aquarium? These skimmers operate according to the horizontal rotation principle and are driven by the Hydrofoamer. The entire skimmer operates on the basis of the so-called contact skimming method. For this reason, coarser particles in the size of plankton are not drawn in. This method of operation is very gentle so that no living plankton is drawn into the pump circuit. The extremely flat construction makes it the smallest skimmer in its performance class. Low Sensitivity In soft coral aquariums with leather corals and anemones, for example, the share in dissolved organic matter may be higher, sometimes it may even be vital. In this type of aquarium, the recommended aquarium volume can be used without deduction. High Sensitivity Aquariums with primarily small-polyp stony corals (SPS) require an especially high degree of purity. They should have no load of phosphates or nitrates worth mentioning. The Classic DOC skimmer should NOT be used as a stand-alone" solution in these aquariums. This type of aquarium should be reduced by about 40 percent in volume for the skimmer volume mentioned. High Sensitivity for Breeding Tanks with Plankton Stony coral aquariums or other breeding tanks with plankton food require an especially high degree of purity. Good oxygen saturation and very clear water are the prerequisites. This type of aquarium should be reduced by about 60 percent in volume for the skimmer volume mentioned. NOTE: Products are sold in 110V conversions. Please verify your countrys volt conversion before making any electrical purchase. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or credit card Manufacturer Info Tunze For forty-five years the name TUNZE has been synonymous with aquariums. Many products and components which we have developed in the course of time are now standard features of aquarium technology today. This confidence in TUNZE is no coincidence. The company has remained true to its philosophy right from the beginning, researching water biotopes all over the world to develop components which enable natural water conditions in the closed environment of an aquarium. In the implementation of know-how, effectiveness and efficiency, TUNZE takes the lead in environmental compatibility. Their motto is: quality and reliability. These values are upheld with well thought-out and precise tool making by highly qualified experts. The brand names of TUNZE and Turbelle meet the expectations of the seal of quality; Made in Germany. Many of the products shown in this catalog are protected by national and international patents. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or credit card http://www.saltwatereddies.com/content-product_info/product_id-2594/tunze_classic_doc_protein_skimmer_9210_to_250gal.html http://www.saltwatereddies.com/images/products/Tunze-Classic-DOC-Protein-Skimme.jpg http://www.saltwatereddies.com/content-product_info/product_id-2594/tunze_classic_doc_protein_skimmer_9210_to_250gal.html Turboflotor Blue 1000 It used to be that hang on back, or HOB skimmers, could be an excellent solution for smaller tanks or when space was at a premium. With these new Tuboflotor HOB skimmers, people without a big sump and with tanks up to 125 gallons may find this HOB the perfect solution! The Turboflotor Blue 1000 is an exciting addition to our protein skimmer line up. Smaller than the T1000 Multi SL this skimmer is designed for use on aquaria up to 125 gallons. The 18" tall Blue 1000 shares some of the most popular traits of the Multi including one pump convenience and versatile hang-on or in-sump installation options. The great new Blue design offers a large volume collection cup, our patented conical riser, precision control and high quality cast acrylic construction. The super efficient 12 watt pump means it is easy on your power bill but don't be fooled, to earn a place in the pantheon of Turboflotors this skimmer had to be fierce. Enter the new mesh needle wheel impeller. This twist on our venerable needle wheel design means lots of very small bubbles and one big attitude. * For tanks up to 125 gallons * 18" Tall * Footprint: 10" x 4.5" * 12 watts The Turboflotor Blue 1000 is designed for use as a Hang-On skimmer, with only the OR1200 Pump and the I/O fittings residing inside the aquarium, or as a freestanding Skimmer inside or outside the sump. At only 18.5 high, it is sized to fit nearly every standard aquarium cabinet. All the characteristic Turboflotor details are here, from the conical riser inside the foam cup and one-handed adjustable foam production to the Needle Wheel technology and Ceramic bearings for quiet operation. But this is a great new design that gives you the one-pump hang-on convenience of a T1000 Multi SL and enough "skimming power" for a 125 gallon Aquarium. The new shape creates a larger volume for more skimming capacity as well as skimmate collection. We think you are going to love this one! The T1000 Blue is manufactured using high quality acrylic. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1933/aqua_medic_turboflotor_1000_blue_hang_on_skimmer.html http://www.saltwatereddies.com/images/products/AquaMedic_T1000_hang_on_skimmer_.jpg http://www.saltwatereddies.com/content-product_info/product_id-1933/aqua_medic_turboflotor_1000_blue_hang_on_skimmer.html Nitrate Reductor NR 5000 NR-5000 Specifications: Nitrate Reductor All natural reduction or elimination of Nitrates - Dimensions: 20" x 12" x 38.5" Recommended for systems up to 800 gallons Nitrates are the end result of the biological filtration in your aquarium system and certainly the biggest reason you find yourself tangled in hoses and wrestling with buckets. Aqua Medic offers some relief, with a complete line of Nitrate Reductors, including 2 models designed to cover aquaria from 75 to 800 gallons. The all natural process works for both fresh and saltwater systems to reduce or eliminate nitrates. You will enjoy fewer water changes, less algae to scrub, fewer problem-algae blooms and better animal health. Just the reduced water change schedule alone will improve your system stability, lower the costs of maintenance and allow you more time to enjoy it! The Nitrate Reductors utilize a sealed chamber through which water is pumped very slowly, creating a low oxygen environment. In these anoxic conditions, naturally occurring bacteria breakdown nitrate (NO3), to use the oxygen it contains, entirely removing it from the system. The Deniballs filter media is a carbon "food" source for these bacteria and they should be replaced annually. For optimum control and a minimum of fine-tuning effort, we recommend using an Aqua Medic mV Computer to regulate the flow through-put based on the mV value within the reductor. Go on! Treat yourself ... treat your aquarium * Nitrate Reductor 1000 For aquaria up to 250 gallons (includes Dosing Pump) * Maxi Nitrate Reductor 5000 For aquaria up to 800 gallons Nitrate Reductor Stats Model Total Media Deniball Volume Cord Length Capacity Est. Estimated 1000 5 liter 0.6 g = 3 Boxes 96" 5000 12 liter 1.2 g = 1 Bucket 96" Model Hose Connections Water Inlet Water Outlet CO2 Inlet 1000 1/4" 1/4" 1/4" 5000 Model Flow Recommendations Water Thru Water Drip Count 1000 0.5-0.75 gph 1-2 drops per second 5000 2.5-8.0 gph N/A Model Includes SP3000 Dosing Pump Circulation Pump Included 1000 Yes Integrated (Lid) 5000 No External OR2500 Top of Page Nitrate Reductor Tips and Tricks * It is strongly recommended that you use a mV Computer or Controller with a High Pressure mV Probe to manage the ORP inside the reactor. * Replace your Deniballs annually to maintain optimal food levels for the anaerobic bacteria within the reactor. * Check the water flow rates regularly for deviations. * Be patient when establishing your Nitrate Reductor as it can take months to fully establish a denitrifying bacteria colony. After plumbing it into your system, fill your reductor with system water, secure the lid and plug in the internal circulation pump but don't run water through it for 1 week while feeding Denimar Powder daily. After one week, begin flowing water through the reactor to maintain an ORP level between -50 and -250 mV. You can feed Denimar several times a week until slime can be seen collecting on the media at which time the Deniballs are sufficiently dissolving and supplemental feeding can be stopped. De-nitrification is fully established when the effluent water shows no or trace quantities of nitrate, depending on system levels. * If you smell "rotten eggs" (sulphur dioxide) it indicates that the flow is too slow through the reductor. Raise the water flow rate, or the mV setting if using a mV Controller/Computer. * Use an SP-3000 Dosing Pump, valved on the input side, to feed water through the Nitrate Reductor 400. The Nitrate Reductor 1000 includes the SP-3000 pump. * Use the included 3/4" tee fitting to bleed off the water input for the Nitrate Reductor 5000 from your main system pump or filter accessory pump. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2562/nitrate_reductor_nr_5000.html http://www.saltwatereddies.com/images/products/Nitratew.jpg http://www.saltwatereddies.com/content-product_info/product_id-2562/nitrate_reductor_nr_5000.html Bypass reactor filled with sulfur beads to remove nitrate The Sulphur Reactor is a Bypass Reactor filled with sulfur beads which promote the growth of the specialized bacteria that remove nitrate. As a byproduct of the biochemical reaction that takes place in the Sulfur Reactor, sulfuric acid is produced and in consequence this unit must always be used in combination with a Hydrocarbonate Reactor, such as the HR 400, in which the sulfuric acid is neutralized by hydrocarbonate. Both reactors are supplied with a strong holding system Diameter 80 mm (c. 3.1") Length 35.5 cm (c. 14") Hose connection 4/6 mm (c. 1/4") Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2050/sulphur_reactor_sr_400.html http://www.saltwatereddies.com/images/products/Untitled-1.jpg http://www.saltwatereddies.com/content-product_info/product_id-2050/sulphur_reactor_sr_400.html Aqua Medic 1000 Nitrate Reducer up to 250 gallons. The Maxi Nitrate Reducer is an anaerobic biological reactor for the removal of nitrates from marine and fresh water aquaria. It has a large volume of 10 liters (2.5 gallons) and an internal circulation pump. The Nitrate Reducer works with a flow rate of 1 to 4 liters per hour (0.25 to 1 gallon per hour). This condition, in the absence of oxygen, promotes special bacteria to metabolize nitrate. Denimar tablets or Deniballs are used as an organic energy source. To monitor this process, it is possible to use a redox potential monitor (ORP monitor) in conjunction with the probe inserted in the supplied port. The Nitrate Reductor is a closed unit that can be integrated in filter systems, but it may also be used to stand alone under the aquarium. The water supply can be via a bypass from a circulation pump, canister filter or a small powerhead. 1 per case. Shipment Dimensions: * Weight: 14.5 lb * Height: 30 in * Width: 8 in * Depth: 7.9 in OPTIONAL: A filter material and bacterium food for the Nitratereductor Deniballs are made from a special biologically based plastic material and are designed to provide a long-term carbon and food source for anaerobic bacteria within our Nitratereductors. In the absence of oxygen, these anaerobic bacteria metabolize the Deniball material to accelerate the reduction of nitrates into nitrogen gas. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1905/nitrate_reducer_1000_nitratreductor_aqua_medic.html http://www.saltwatereddies.com/images/products/Nitrate_reducer_.jpg http://www.saltwatereddies.com/content-product_info/product_id-1905/nitrate_reducer_1000_nitratreductor_aqua_medic.html NP BioPellets are a unique carbon based polymer that work as both a substrate and food source for aerobic and anaerobic bacteria. Also known as the Solid Vodka Method. How It Works: NP BioPellets are composed of biologically degradable carbon-based polymers that act as food source for bacteria and as these bacteria grow and multiply they consume waste products from the water, mainly nitrate and phosphate. During this process anaerobic layers will also develop resulting in additional de-nitrification. This process is called immobilization. The surplus of bacteria produced in this process are then consumed by filter and suspension feeding organisms such as sponges and corals or skimmed off by a protein skimmer. Benefits: 1. Reduces Nitrate and Phosphate Levels and Permits Heavy Feeding: The bacteria growing on the NP BioPellets consume both nitrate and phosphate and when used in conjunction with a phosphate reactor and strong protein skimmer heavy bio-loads and heavy feeding are possible without negatively affecting water quality. 2. Simpler Solution than the Vodka or Sugar Method: Unlike liquid carbon sources such as Vodka or sugar, NP BioPellets concentrate the bacteria in a filter compartment or reactor, instead of all over in the aquarium where the bacteria may clog up pipes and/or hoses. Daily dosing is also not required. 3. Helps Prevent Cyanobacteria: The bacteria growing on the NP BioPellets competes with nuisance microbes, such as cyanobacteria, thereby limiting there growth and proliferation. Usage Guidelines: - NP BioPellets should be placed in a fluidized reactor, like the PhosBan Reactor, or a canister filter and this reactor or filter should be placed in the sump before the protein skimmer to limit the amount of bacteria entering the system. A fluidized reactor typically produces better results and prevents detritus buildup. - NP BioPellets should never be used without sufficient aeration as this may lead to low oxygen and pH levels especially during nighttime hours. Aeration can be increased with the addition of an air pump and/or a more efficient protein skimmer. - NP BioPellets should be used with a phosphate adsorbent media based on iron hydroxide like PhosBan or RowaPhos when heavy feeding is required. This is because most foods contain higher levels of phosphate than what is consumed by bacteria, fish and invertebrates in comparison to nitrogen. - Sufficient water flow through the NP BioPellets is required to prevent production of hydrogen sulfide gas. - The use of ozone and UV will negatively affect bacterial levels on the NP BioPellets and increase the length of time before nitrate and phosphate begin to drop. Dosage Guidelines: 500-1000 mL of pellets for every 100 gallons of water. Heavier dosage may be required for heavily stocked tanks and/or heavily feed tanks. Dosage may be increased indefinitely provided the aquarium water is sufficiently aerated and filtered/skimmed. (A large, efficient protein skimmer is highly recommended.) It typically takes 2-4 weeks for nitrate and phosphate levels to start decreasing. If nitrate and phosphate are already very low prior to adding the NP BioPellets a decrease in these levels may not be detectable with standard aquarium test kits. Replacement Guidelines: NP BioPellets typically need to be replenished every 3-6 months to replace the NP BioPellets that have been consumed by the bacteria. Regular measurements of both nitrate and phosphate levels are recommended to determine if the amount of NP BioPellets should be increased or decreased. Disclaimer: With any organic carbon source, like NP BioPellets, there are risks and the use of these pellets is only advised for advanced aquarists. ReefGeek, Inc., NPBioPellets.com, coral publications and other reef interests will not be held responsible for any loss of livestock or damages to personal property which results from the misuse of NP BioPellets. Results: The following list includes animals which have thrived in aquariums using NP BioPellets. Please note that although NP BioPellets may also serve as a bacterial food source, feeding with various types of plankton or artificial alternatives is required to keep these animals alive for prolonged periods of time. - Fish: Pipefish and dragonets (Synchiropus and Corythoichthys schultzi), Anthias and all major Teleost species. - Bivalves: Flame Scallops (Lima scabra) and Tridacna. - Tunicates: Colonial sea squirts (Neptheis fascicularis), solitary species Zooxanthellate Scleractinian corals (Goniopora and Alveopora) and all major Scleractinian species. - Azooxanthellate Scleractinian corals: Rhizotrochus typus and Tubastrea coccinea. - Zooxanthellate Octocorals: All major Octocoral species. - Azooxanthellate Octocorals: Menella, Swiftia exserta and Dendronephthya. - Echinoderms: Comatula, Comanthina and Linckia laevigata. - Sponges: Trikentrion flabelliforme and cryptic species as well as medium-sized macro sponges. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1940/np_biopellets_solid_vodka_dosing_pellets_500_ml.html http://www.saltwatereddies.com/images/products/np_bio_pellets_filter_media.jpg http://www.saltwatereddies.com/content-product_info/product_id-1940/np_biopellets_solid_vodka_dosing_pellets_500_ml.html Deniballs 25 l box, filter material and bacteria feed A filter material and bacterium food for the Nitratereductor Deniballs are made from a special biologically based plastic material and are designed to provide a long-term carbon and food source for anaerobic bacteria within our Nitratereductors. In the absence of oxygen, these anaerobic bacteria metabolize the Deniball material to accelerate the reduction of nitrates into nitrogen gas. One box of Deniballs (0.2 gallons) for the Nitratereductor 400 and 3 boxes for the Nitratereductor 1000 is enough to be the sole source of supplemental food within the reductor for 12 months. For the Nitratereductor 5000 you will require about 1.2 gallons, about 6 boxes or one bucket, every year. Changing the Deniballs every 12 months is recommended to ensure safe and maintenance free denitrification for your fresh or saltwater aquarium. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2557/deniballs_25_l_box.html http://www.saltwatereddies.com/images/products/Deniballs.jpg http://www.saltwatereddies.com/content-product_info/product_id-2557/deniballs_25_l_box.html A filter material and bacterium food for the Nitratereductor Deniballs 15 l bucket, filter material and bacteria feed for the NR Deniballs are made from a special biologically based plastic material and are designed to provide a long-term carbon and food source for anaerobic bacteria within our Nitratereductors. In the absence of oxygen, these anaerobic bacteria metabolize the Deniball material to accelerate the reduction of nitrates into nitrogen gas. One box of Deniballs (0.2 gallons) for the Nitratereductor 400 and 3 boxes for the Nitratereductor 1000 is enough to be the sole source of supplemental food within the reductor for 12 months. For the Nitratereductor 5000 you will require about 1.2 gallons, about 6 boxes or one bucket, every year. Changing the Deniballs every 12 months is recommended to ensure safe and maintenance free denitrification for your fresh or saltwater aquarium. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2028/deniballs_15_l_bucket.html http://www.saltwatereddies.com/images/products/Deniballs.jpg http://www.saltwatereddies.com/content-product_info/product_id-2028/deniballs_15_l_bucket.html A filter material and bacterium food for the Nitratereductor Deniballs 5 l bucket, filter material and bacteria feed for the NR Deniballs are made from a special biologically based plastic material and are designed to provide a long-term carbon and food source for anaerobic bacteria within our Nitratereductors. In the absence of oxygen, these anaerobic bacteria metabolize the Deniball material to accelerate the reduction of nitrates into nitrogen gas. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2556/deniballs_5l_bucket.html http://www.saltwatereddies.com/images/products/Deniballs.jpg http://www.saltwatereddies.com/content-product_info/product_id-2556/deniballs_5l_bucket.html This tank allows you to have all of your water made ahead of time, and will work with all AquaFX systems including the 3-stage Dolphin, the 4-stage Barracuda, the 5-stage Mako Ultra 40 Gallon Storage Tank Storage reservoirs are made with a FDA APPROVED food grade material (polypropylene) and include a fitted lid. DI & the ultimate 9-stage Great White. We recommend this setup to any reef keeper who travels or has a busy schedule! Simply plug in the system and we do the rest! An additional $10.00 will be added to the shipping charge. FEATURES: TA-40-18-33 * 18 inches wide by 32 1/2 inches tall * Equipped with a float valve assembly to avoid over filling (Installed) * Tight fitting removable lid to avoid airborne contamination. * Auto shutoff valve for unattended operation. We can supply larger tanks from 100 to 500 gallons and fit them with float valves. Please call for pricing. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2148/40_gallon_storage_tank_w_float_valve.html http://www.saltwatereddies.com/images/products/40.JPG http://www.saltwatereddies.com/content-product_info/product_id-2148/40_gallon_storage_tank_w_float_valve.html From the Leader inAquarium Water Treatment : The Barracuda offers the following features: High efficiency 1-micron sediment pre-filter 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters High flow/ high rejection TFC membrane High-efficiency color-changing DI cartridge 160 PSI pressure gauge marked with operating and unsafe ranges at 100 GPD In-Line TDS meter (Add Inline TDS Meter for $29 on this model) Solid Aluminum no-rust metal mounting bracket Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1853/barracuda_4_stage_rodi_100_gpd.html http://www.saltwatereddies.com/images/products/Barracuda.jpg http://www.saltwatereddies.com/content-product_info/product_id-1853/barracuda_4_stage_rodi_100_gpd.html Boyd ChemiClean. Dosage 1 scoop per 10 gallons (scooper included). Treats 300 gallons. Cyano bacteria is usually encouraged with the presence of nitrate and ammonia, which are both fixed forms of nitrogen. ChemiClean helps clean and remove this problem algae through its own unique process. Most other red slime removers use purely antibiotics. The use of these substances with in your aquarium can have disastrous effects upon your nitrifying bacteria and cause your tank to crash, and thus killing the inhabitants of your aquarium. The use of ChemiClean not only as a problem solver, when red slime is present, but as a regular maintenance procedure will help keep your water crystal clear and your tank free of unwanted cyano bacteria. For best results, turn off UV sterilizer or Ozonizer and Protein Skimmer. Remove Chemi Pure or Carbon Filtration for 24 hours following each treatment. You must add aeration through the use an air stone when using ChemiClean. Use the additional aeration throughout the treatment process. Removes disease causing red cyano bacteria (red slime) from live coral, Removes red slime, black, blue green and bubble producing algae, Oxidizes trapped organic sludge and sediment, Clarifies aquarium water to crystal clear, Promotes ideal enzyme balance, Contains no phosphates, algaecides or erythromycin succinate, Safe for reef tanks, all invertebrates, desirable macro algaes, nitrifying bacteria and fish, Treats up to 300 Gallons. About Boyd, We manufacture aquarium products for marine and fresh water aquatic environments, we strive to keep Dick Boyds level of excellence, quality and customer service. Boyd makes aquarium products you need to help your aquarium thrive, be healthy and beautiful just like you fine in nature. Just like Dick Boyd we are here to help you in any way we can to make you a successful aquarium hobbyist, with are products your aquarium will thank you we its beauty of aquatic live. Shipment Dimensions: * Weight: 0.05 lb * Height: 4 in * Width: 2 in * Depth: 2 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2070/chemiclean_2gm_boyd.html http://www.saltwatereddies.com/images/products/BoydChemiclean.jpg http://www.saltwatereddies.com/content-product_info/product_id-2070/chemiclean_2gm_boyd.html Cyano bacteria is usually encouraged with the presence of nitrate and ammonia, which are both fixed forms of nitrogen. ChemiClean helps clean and remove this problem algae through its own unique process. Most other red slime removers use purely antibiotics. The use of these substances with in your aquarium can have disastrous effects upon your nitrifying bacteria and cause your tank to crash, and thus killing the inhabitants of your aquarium. The use of ChemiClean not only as a problem solver, when red slime is present, but as a regular maintenance procedure will help keep your water crystal clear and your tank free of unwanted cyano bacteria. For best results, turn off UV sterilizer or Ozonizer and Protein Skimmer. Remove Chemi Pure or Carbon Filtration for 24 hours following each treatment. You must add aeration through the use an air stone when using ChemiClean. Use the additional aeration throughout the treatment process. Removes disease causing red cyano bacteria (red slime) from live coral, Removes red slime, black, blue green and bubble producing algae, Oxidizes trapped organic sludge and sediment, Clarifies aquarium water to crystal clear, Promotes ideal enzyme balance, Contains no phosphates, algaecides or erythromycin succinate, Safe for reef tanks, all invertebrates, desirable macro algaes, nitrifying bacteria and fish. About Boyd, We manufacture aquarium products for marine and fresh water aquatic environments, we strive to keep Dick Boyds level of excellence, quality and customer service. Boyd makes aquarium products you need to help your aquarium thrive, be healthy and beautiful just like you fine in nature. Just like Dick Boyd we are here to help you in any way we can to make you a successful aquarium hobbyist, with are products your aquarium will thank you we its beauty of aquatic live. NOT FOR SALE IN CALIFORNIA. Chemi Clean removes disease causing red cyano bacteria (red slime) from live coral,and oxidizes trapped organic sludge and sediment. Chemi Clean also clarifies aquarium water to crystal clear and promotes ideal enzyme balance. Safe for reef tanks, all invertebrates, desirable macro algaes, nitrifying bacteria and fish. Contents treat 300 gallons. Another great product brought to you by Boyd enterprises inc. manufactures of the world famous chemi-pure. Boyd enterprise always maintains the highest standards of excellence for its products. So its no surprise that in just a short period of time after being released to the public, chemi clean became a standard for treating cynobacteria in marine aquariums. Cynobacteria is usually encouraged with the presence of nitrate and ammonia, which are both fixed forms of nitrogen. Chemi-clean helps clean and remove this problem algae through its on unique process. Most other red slime removers use purely antibiotics, namely erythromycin to take care of the algae. The use of such substances with in your aquarium can have disastrous effects upon your nitrifying bacteria and cause your tank to crash, killing the inhabitants of your aquarium. The use of chemi-clean not only as a problem solver, when red slime is present, but as a regular maintenance procedure will help keep your water crystal clear and your tank free of unwanted cynobacteria. Features * SAFE FOR ALL REEF TANKS. ALL INVERTEBRATES, DESIRABLE MACRO ALGAE, NITRIFYING BACTERIA AND FISH FOR BEST RESULTS TURN OFF UV STERILIZER OR OZONIZER AND DISCONTINUE PROTEIN SKIMMER, REMOVE CHEMI-PURE OR CARBON FILTRATION FOR 24 HOURS FOLLOWING EACH TREATMENT. IT IS ADVISABLE TO DO AT LEAST A 20% WATER CHANGE AFTER FULL TREATMENT * YOU MUST USE AN AIR STONE WHEN USING THIS PRODUCT AND WE HIGHLY RECOMMEND USING THE WOODEN TYPES AVAILABLE - PLEASE PUT YOUR AIR STONE IN YOUR TANK, BEFORE YOU START TO DOSE YOUR TANK * REMOVES RED SLIME, BLACK, BLUEGREEN AND BUBBLE PRODUCING ALGAE * ELIMINATES DANGEROUS TRAPPED ORGANIC SLUDGE * CLARIFIES AQUARIUM WATER TO CRYSTAL CLEAR * PROMOTES IDEAL ENZYME BALANCE * CONTIANS NO PHOSPHATES, ALGAECIDES OR ERYTHROMYCIN SUCCINATE California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1404/chemiclean_liquid_2oz_boyd.html http://www.saltwatereddies.com/images/products/BoydChemiclean.jpg http://www.saltwatereddies.com/content-product_info/product_id-1404/chemiclean_liquid_2oz_boyd.html ROWAphos 3.9 inch x 3.9 inch square Sponge, 5 pack. ROWAphos Sponge is designed to effectively remove phosphates and silicates, organic compounds and heavy metals from both fresh-water and salt-water aquariums. The ROWAphos Sponge is unique and offers the proven benefits of both ROWAphos and ROWAcaron in a single easy to use product. Now there is a clean and simple way to control the compounds in your aquarium that fuel the growth of nuisance algae. Unlike other phosphate removal products, ROWAphos does not shock the animals or cause problems when used regularly. In fact, constant use of the product is recommended, as its ability to control nuisance algae is a major benefit. Each box contains 5 sponges. Enough for 5 weeks to 5 months depending on application. Shipment Dimensions: * Weight: 0.1 lb * Height: 5 in * Width: 4.9 in * Depth: 2 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1457/rowaphos_pads.html http://www.saltwatereddies.com/images/products/Rowaphos.jpg http://www.saltwatereddies.com/content-product_info/product_id-1457/rowaphos_pads.html Hydrocarbonate Reactor HR 400 The Sulphur Reactor SR 400 must always be used in combination with a Hydrocarbonate Reactor HR 400 in which the sulphuric acid is neutralized. Both reactors are supplied with a strong holding system. app. 80 mm (c. 3.1"), length app. 35.5 cm (c. 14"), hose connection 4/6 mm (c. 1/4") The Sulphur Reactor SR 400 is a Bio-reactor filled with sulphur beads which promote the growth of the specialized bacteria that remove nitrate. As a by product of the biochemical reaction that takes place in the Sulphur Reactor SR 400, sulphuric acid is produced and in consequence the WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2202/hydrocarbonate_reactor_hr_400.html http://www.saltwatereddies.com/images/products/HN400.jpg http://www.saltwatereddies.com/content-product_info/product_id-2202/hydrocarbonate_reactor_hr_400.html Red Sea 319 Polystand Micron, Biological & Chemical Filter. Dual function filter-154 sq. ft. of Polystrand surrounding 20 oz. of activated carbon in a fine mesh nylon bag. 100 micron pad pre-filters incoming water, then 50 micron fluffed pads provide additional particulate filtration plus biological filtration with nitrifying bacteria. Chemical filtration is provided by the Ocean Clear Carbon in the center core. Completely free-standing. Suitable for ponds too. Shipment Dimensions: * Weight: 12 lb * Height: 12 in * Width: 11.9 in * Depth: 11.9 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1721/ocean_clear_319_polystand_micron_carbon_filter.html http://www.saltwatereddies.com/images/products/Red_Sea_Carbon_Filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1721/ocean_clear_319_polystand_micron_carbon_filter.html A popular choice for refugium macroalgae among advanced aquarists in the United States is Chaetomorpha. Unlike Caulerpa, Chaetomorpha is multicellular and, as such, is inherently more stable. It can be cut and pruned aggressively with little or no fear of toxins being released or having vegetative crashes. And, like its namesake, it can also simply be thinned gently with ease like strands of spaghetti noodles. It is fast growing and makes an excellent vehicle for nutrient export! It is also highly adaptable to a very wide range of lighting [Tip: illuminate most macroalgae in refugia with at least 1 watt of light per liter of water at depths less than 30 cm]. Like most "vegetable-filter" algae species, moderate to strong water flow is necessary; keep a total water flow of at least 20X turnover of the volume of the culturing vessel. There are many other benefits to spaghetti algae, not the least of which is that it is a superb matrix for the cultivation of microcrustaceans. Aquarists with thick masses of Chaetomorpha in their refugiums get a bounty of zooplankton to feed their corals in their display, assuming the refugiums is kept without predators like fishes on the plankton. This genus is also a rather hardy shipper; trading among aquarists is strongly encouraged to distribute this useful organism in the hobby. Nutrient Transport and Nitrate Removal are two key factors in a successful reef system. Here is some useful info I came across at reefland: "Spaghetti algae" is one of the very best macroalgae for nutrient export in "vegetable filter" style refugiums. Chaetomorpha Macro Algae, Chaeto, pronounced "kay-toe", is a great way to naturally turn the nitrogenous compounds of your tank into plant food!!! The waste by-products of life, along with the light you provide for photosynthesis, will help this chaeto double in size on a regular basis. The always popular chaeto, works great, and wont go asexual! Chaetomorpha Algae, also known as Spaghetti Algae or Green Hair Algae, is an excellent macro algae for refugiums. Each cell grows end to end, creating long, stiff strands. It grows in filamentous clumps, resembling a ball of fishing line. You can "prune" it and throw it away--or you can compact it for even greater nutrient absorption. If you have a refugium, just throw this clump in there---it's like a Brillo pad--it stays together fairly well. You can also put it into a mesh bag for use in your main tank. There are many different ways you can contain the chaeto in your main tank all the while providing great hiding spots for the tiny "critters" in your tank. This algae is fast growing and is not palatable to many herbivorous species. Chaetomorpha Algae removes both phosphates and nitrates from the water. To increase the amount of nutrients this algae exports, use moderate to high lighting and keep it in an area of high water flow. It should ideally be tumbled in an algae filter. This algae is sold by the bag and will arrive in a dense mat. Spaghetti algae, though not palatable to many herbivorous species, is popular in reef aquariums for its ability to remove nitrates, assist in buffering pH, uptake carbon dioxide producing oxygen, and assist in balancing trace elements. It also provides hiding spaces for small creatures. To increase the amount of nutrients this algae exports, keep in an area of high water flow ideally tumbled in an algae filter. This volume will fill a 1/2 Pint Ziploc Bag. Ships Great Even in the Cold!: Customer feed back:... ..."just wanted to say thanks again for the great chaeto! When I bought mine I was expecting a lil' sandwich bag not the Ziploc bag stuffed full that came! I've noticed an explosion of pods in my fuge since adding it as well, so my fish thank you too! for the amount you sell has got to be the best deal going!" --South Dakota "Props for this chaeto I have bought it twice before i live in AK also bought it in winter one time it nearly froze and it still came back with a boom" ---Alaska "...for great chaeto, mine had lots of critters in it... --- Dublin, CA I was tumbling my small piece I got off eBay for more $ than I paid Greg (Eddie) and yes it did look cool. However with the package I got from Greg I can no longer get it to roll over no matter how much air I pumped in so I stopped. I just roll it over every day or two when I change my filter media sense it is just lifting the filter tray and reaching in.... I have mine on a 15 hour cycle and my nitrates went from 40 to zero in less than 2 weeks. I did not even do a water change in that period. Get some! I would buy more but I don't need it, mine is growing well. ---Yucca Valley, CA LIMIT 3 PER ORDER Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1930/chaetomorpha_macroalgae_spaghetti_small.html http://www.saltwatereddies.com/images/products/Chaeto_macro_algae_sale.JPG http://www.saltwatereddies.com/content-product_info/product_id-1930/chaetomorpha_macroalgae_spaghetti_small.html AE Tech ETSS QUAD 1800 XR Protein Skimmer (26 inches tall) rated for up to 800 gallon aquariums. Originally built as an under the tank skimmer for a 500 gallon shark tank. It has since become a favorite of public aquariums and large professional tank installations. Simple, trouble free under tank design, excellent water cleaning performance and commercial duty construction all add up to big cleaning capacity in a small package. Inlet is 1-1/4 inch PVC socket fitting. Outlet is a 2 inch gate valve for precise skimmer adjustment. Features new XR injection system. Footprint is 18 inch by 10 inch. Inlet is 1-1/4 inch PCV socket fitting. Outlet is 2 inch gate valve for precise skimmer adjustment. Recommended input flowrate is 1800 to 2000 gph. Four full size Downdraft skimming towers provide the ultimate in under tank skimming capacity. This is the worlds most powerful skimmer at 26 in height. It will process up to 1800 gallons/hour. Enough cleaning power for really large tanks. Features Powerful, Reliable ETSS patented Downdraft skimmer technology Four full size Downdraft skimming towers provide the ultimate in under the tank skimming capacity. This is the worlds most powerful skimmer at 28 in height. It will process up to 1800 gallons/hour. Enough cleaning power for really large tanks. Small size allows it to be placed directly on top of the tank (This is configuration is commonly used by Public Aquariums in large commercial displays) or operated inside a tanks stand. Fully powered with a 1/2 HP Iwaki pump.Very energy efficient with a 100 RLT Iwaki pump. (Pump Not Included). It can provide exceptional water quality in tanks up to 800 gallons. Fully sealed construction including closed injectors and quick disconnect water inlet fittings. Large, efficient 1 1/4 inch inlet plumbing with bushing for 1 inch feed line and a large 2 inch outlet Gate Valve. Two keyhole flanges for the collection cup makes cleaning fast and easy . Fully Automatic/Sealed operation available with the 5 gallon auto waste bucket lid. Automatically stops foam production when filled. Specifications Dimension: 18 inches wide x 10 inches deep x 28 inches tall Recommended Pumps: Iwaki 100 RLT or equivalent, 1/2 HP- Iwaki or Pool Pump for maximum output. Flow Rating: 1500 to 1800 Gallons per Hour processing Tank size: up to 800 gallons Features Powerful, Reliable ETSS patented "Downdraft" skimming tower technology Four full size "Downdraft" skimming towers provide the ultimate in under the tank skimming capacity. This is the worlds most powerful skimmer at 28 in height. It will process up to 1800 gallons/hour. Enough cleaning power for really large tanks. Small size allows it to be placed directly on top of the tank (This is configuration is commonly used by Public Aquariums in large commercial displays) or operated inside a tank's stand. Fully powered with a 1/2 HP Iwaki pump. Very energy efficient with a 100 RLT Iwaki pump. It can provide exceptional water quality in tanks up to 800 gallons. * Weight: CALL OR EMAIL FOR SHIPPING QUOTE * Height: 26 in * Width: 16 in * Depth: 10 in **Freight charges. Call for shipping quote (75 lbs) Please call 503-380-2023 or email support@saltwatereddies.com for shipping quote California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1758/ae_tech_etss_quad_1800_xr_protein_skimmer.html http://www.saltwatereddies.com/images/products/1800_XRProteinSkimmer.jpg http://www.saltwatereddies.com/content-product_info/product_id-1758/ae_tech_etss_quad_1800_xr_protein_skimmer.html Boyd ELITE Chemi Pure 11.74oz. LONGER LIFE, Fish often live three to four times longer than in any other closed system, fresh or marine. NECESSARY ORGANISMS, Allowed growth with no danger of pollution. REMOVES OFFENSIVE ODORS, REAL SEA WATER OR ARTIFICIAL REMOVES TOXIC ELEMENTS, Including Copper and Phenol IMMEDIATE ACCLIMATION, with ravenous appetite. QUICKER RESPONSES, Neurological reactions like fishes in natural habitat. FRESHWATER FISHES, of all species thrive ESPECIALLY GOOD FOR AFRICAN CICHLIDS and DISCUS NO WATER CHANGE NECESSARY, for at least 5 years (length of test only) CRYSTAL CLEAR WATER, Always sparkling blue white water NO CLEANING, Necessary for health of fish. CONSTANT pH, Always within the safe range NO OSMOTIC SHOCK, 90 percent eliminated NO ION ANTAGONISM ECONOMICAL, Replacement only every four to six months makes initial cost very low eliminates expensive water changes fewer losses. Chemi Pure is unlike any mechanical or chemical filtration material you have used before. Whether you are a fresh water or salt water enthusiast, it is something you will have to use, see, and test for yourself in order to believe the results. Chemi Pure comes already packed in pure polyester filter bags in sealed plastic bottles which are termed one unit each also available in 1/2 units of 5oz. One unit is recommended for up to 40 gallons of water and which remains completely active for 4 to 6 months with no regeneration or cleaning required. We recommend that, in cases of heavy bio load, that each unit of Chemi Pure be replaced within 3 to 4 month period. Each bag of Chemi Pure is simply removed from the plastic bottle and installed directly in your filter. It is pre moistened and should be rinsed prior to use. Shipment Dimensions: Weight: 0.8 lb Height: 5 in Width: 3.25 in Depth: 3.25 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1217/chemi_pure_elite_11_74oz_boyd.html http://www.saltwatereddies.com/images/products/Chimipure.jpg http://www.saltwatereddies.com/content-product_info/product_id-1217/chemi_pure_elite_11_74oz_boyd.html Antiphos FE is an ideal media for selectively extracting phosphate from aquarium water, helping to reduce and prevent nuisance algal growth. Antiphos FE is a highly active iron based product containing no aluminum and is completely non-toxic to aquarium plants and animals. Phosphate is irreversibly bound to the media and is removed from the aquarium when the Antiphos FE is renewd. It is particularly effective in controlling phosphates in coral reef aquaria and can reduce phosphates to trave values for extended periods of time. The coarse particle size enables high flow rates through the media without resorting to a fluidized bed. The binding capacity of Antiphos FE is 10g phosphate/kg and 500ml can treat a normally populated 80 gallon aquarium for 3 to 6 months. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2027/antiphos_fe_5000_ml.html http://www.saltwatereddies.com/images/products/Antiphos.jpg http://www.saltwatereddies.com/content-product_info/product_id-2027/antiphos_fe_5000_ml.html CaribSea Phosbuster Pro 8 oz PhosBuster Pros unique patent pending formula removes dissolved phosphates in minutes instead of days. Safe for all reef tanks, saltwater, and freshwater aquariums of all sorts. Each 8 oz. bottle removes at least 1.5 ppm in up to 250 gallons of water! No more fiddling with filter bags, or special reactors; just dose it and forget about your phosphate problem. Phos-Buster Pro may be used regularly as part of a preventative maintenance program. How does PhosBuster Pro work? PhosBuster Pro chemically binds and precipitates phosphate into an inert compound that is stable in the aquarium and is then filtered out, through protein skimming. Will the phosphates dissolve or reintroduce back into the water column? No, it is not possible in aquarium situations the phosphates are tied up in a compound that is insoluble under normal aquarium parameters. Direction of Use Add 1 capful (5 ml) of PhosBuster per 5 gallons of aquarium water (1 ml per gallon). Place in the sump or any high flow area of the system for rapid dispersal. Some temporary cloudiness may appear. Desired results should be achieved within 72 hours depending upon level of phosphates in the system. Keep all filters running during this time period then rinse or replace filter media. Retest water for phosphates and repeat treatment as needed. Each treatment will remove 1.5ppm of phosphate from aquarium water. PhosBuster may be used monthly as part of a preventative maintenance program. Shipment Dimensions: Weight: 1 lb Height: 6 in Width: 2 in Depth: 1.9 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. For CA orders Only: please add 8.75% State Tax http://www.saltwatereddies.com/content-product_info/product_id-1218/phosbuster_pro_8_oz.html http://www.saltwatereddies.com/images/products/Phosbuster_pro_8.jpg http://www.saltwatereddies.com/content-product_info/product_id-1218/phosbuster_pro_8_oz.html CaribSea Phosbuster Pro 1 gallon PhosBuster Pros unique patent pending formula removes dissolved phosphates in minutes instead of days. Safe for all reef tanks, saltwater, and freshwater aquariums of all sorts. Each 1 gallon. bottle removes at least 1.5 ppm in up to 4000 gallons of water! No more fiddling with filter bags, or special reactors; just dose it and forget about your phosphate problem. Phos-Buster Pro may be used regularly as part of a preventative maintenance program. How does PhosBuster Pro work? PhosBuster Pro chemically binds and precipitates phosphate into an inert compound that is stable in the aquarium and is then filtered out, through protein skimming. Will the phosphates dissolve or reintroduce back into the water column? No, it is not possible in aquarium situations the phosphates are tied up in a compound that is insoluble under normal aquarium parameters. Direction of Use Add 1 capful (5 ml) of PhosBuster per 5 gallons of aquarium water (1 ml per gallon). Place in the sump or any high flow area of the system for rapid dispersal. Some temporary cloudiness may appear. Desired results should be achieved within 72 hours depending upon level of phosphates in the system. Keep all filters running during this time period then rinse or replace filter media. Retest water for phosphates and repeat treatment as needed. Each treatment will remove 1.5ppm of phosphate from aquarium water. PhosBuster may be used monthly as part of a preventative maintenance program. Shipment Dimensions: Weight: 8 lb Height: 12 in Width: 8 in Depth: 5 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.CA Only add 8.75% State Tax http://www.saltwatereddies.com/content-product_info/product_id-1566/phosbuster_pro_1_gallon.html http://www.saltwatereddies.com/images/products/Phosbuster_pro_8.jpg http://www.saltwatereddies.com/content-product_info/product_id-1566/phosbuster_pro_1_gallon.html The "Nano" model series has been designed for the use in reef biotopes up to 200 liters (52 gal.) and is gentle to the plankton in operation. The DOC Skimmer 9002 removes up to 80 percent of organic waste matter, such as protein and cellulose, from the aquarium water. Very little space is required in the aquarium, and its handling is very easy. On account of their construction, these models are particularly quiet during operation. On account of the high demands in stony coral aquariums, this skimmer should be used only in aquariums with about 100 liters (26 gal.) of water. Mixed aquariums or soft coral aquariums up to 200 liters (52 gal.) can be set up without any problems. Delivery condition: Ready for mounting with a magnetic holding device. Principle By means of the water jet of the Nano pump and a high-performance jet, a fine pearly air mixture is produced with is released into an easy-to-clean skimmer cup through a newly developed reflection system. The protein-containing aquarium water diffuses into the skimmer through the opening in the bottom and on the rear, which is gentle to the plankton, thus suitable in particular for breeding tanks with living plankton. Specifications * Recommended for aquariums from 40 to 200 liters (10 to 52 gal) of salt water * Dimensions: 4.9" L x 2.1" W x 13.3" H * Immersion depth: approximately 7" to 8.6" * Skimmer cup volume: 0.3 l (0.79 gal) * Air capacity: 150 l/h (39.6 gal/h) * Power consumption: 10W What's in the Box * skimmer body * nano pump * 6ft power ford * collection cup * lid for collection cup * tunze cleaning brush * pipe cleaner * instruction manual Manufacturer Info Tunze For forty-five years the name TUNZE has been synonymous with aquariums. Many products and components which we have developed in the course of time are now standard features of aquarium technology today. This confidence in TUNZE is no coincidence. The company has remained true to its philosophy right from the beginning, researching water biotopes all over the world to develop components which enable natural water conditions in the closed environment of an aquarium. In the implementation of know-how, effectiveness and efficiency, TUNZE takes the lead in environmental compatibility. Their motto is: quality and reliability. These values are upheld with well thought-out and precise tool making by highly qualified experts. The brand names of TUNZE and Turbelle meet the expectations of the seal of quality; Made in Germany. Many of the products shown in this catalogue are protected by national and international patents. Warranty 1 year manufacturer warranty. All warranty services are provided by the manufacturer. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2254/tunze_nano_doc_protein_skimmer_9002.html http://www.saltwatereddies.com/images/products/TUNZ_nanoDOC.jpg http://www.saltwatereddies.com/content-product_info/product_id-2254/tunze_nano_doc_protein_skimmer_9002.html Worlds most Efficient RO/DI machine from AquaFX! AquaFX is proud to release the newest in a line of Green and Efficient RO units, the first of which is the Octopus RO/DI unit. At a glance, the Octopus seems pretty simplistic. But take a closer look and you will see a marvel! Efficiency is the game, and this unit is the King. You can look forward to unique features such as. The Octopus includes such features as: *Microprocessor Controlled 1:1 Waste water Ratio *High Pressure Bracket Mounted Booster Pump (Located Post Pre-filtration for extended pump life) *Extended DI life via automatic Membrane Flush upon Start-up (Greatly prolong DI life by flushing TDS Creep upon startup!) *Cyclic Membrane Flush (Full Membrane Flush upon shutdown to help prevent membrane scaling) *Built in TDS meter with full (0-99)ppm range *High and Low Pressure Kill Switches (For pump protection and full system automation) This RO/DI unit is setup for greatest filter life, with least amount of waste! All units are made, tested and supported in the USA. Washington State Sales Tax Notice: WA orders only will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2142/aquafx_octopus_1_1_50_gpd_ro_di_unit.html http://www.saltwatereddies.com/images/products/BarOct.jpg http://www.saltwatereddies.com/content-product_info/product_id-2142/aquafx_octopus_1_1_50_gpd_ro_di_unit.html UTC 3400 Modular Canister Filter with Priming Plunger and Ultraviolet Sterilizer, 581 gph 5.79 gallon volume ViaAqua professional Canister Filters are designed to be one of the most efficient water filtration systems on the market. The water is forced through large filter media containers eliminating water channeling and water bypass. The multi stage filtering containers hold large amounts of filtering medias for maximum filtration. The stackable filter media containers come with a bio sponge and white polishing filter pad. The media containers can be filled with your choice of bio media, carbon and/or other resins. The motor has a build in shut off valve and quick release hose connectors, recessed water seal gasket and large lock clamps to secure the motor to the canister body. The ViaAqua Canister Filter quietly and efficiently filters aquatic environments from 20 gal. to 300 gal. Features: Design to support aquatic life and engineered for the hobbyist UV model equipped with UV Sterilizer (5 watts) that will aid in the disease control and keep water clear efficiently and reliably Standard UTC model equipped with priming plunger that helps with the initial setup Easy to set up, install and maintain Modular design for variety filter medias Distinctively superior filtering system High performance external filter Heavy duty latches Watertight seal Filtering baskets with separate grips for various filtering media allowing efficient four steps filtration: mechanical, biological, chemical and UV Sterilizer (for UV model only) Durable ceramic shaft Anti slip rubber feet For fresh and marine environments Oil free motor. Includes tubing. Shipment Dimensions: * Weight: 26.1 lb * Height: 20 in * Width: 17 in * Depth: 13 in NO LONGER AVAILABLE California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1494/utc_3400_canister_filter_with_uv_sterilizer.html http://www.saltwatereddies.com/images/products/UTC 3400 Canister Filter with UV .jpg http://www.saltwatereddies.com/content-product_info/product_id-1494/utc_3400_canister_filter_with_uv_sterilizer.html Below is a link to the latest CoralVue Products. Any of these products may be ordered here through Saltwater Eddies LLC. Not all of the products offered from CoralVue are listed on our website, so we offer you a link to their products and their home page. You may call us at 503-380-2023, or email us at support@SaltwaterEddies.com to any questions you may have. Catalog: copy and paste the link below or click on "click here for more information" to see CoralVue products available: http://coralvue.com/ Thanks for shopping! http://www.saltwatereddies.com/content-product_info/product_id-2206/coralvue_product_online.html http://www.saltwatereddies.com/images/products/CoralVue.jpg http://www.saltwatereddies.com/content-product_info/product_id-2206/coralvue_product_online.html Below is a link to the latest catalog of products from Aqua Medic of North America. Any of these products may be ordered here through Saltwater Eddies LLC. Not all of the products offered from Aqua Medic of North America are listed on our website, so we offer you a link to their catalog and their home page. You may call us at 503-380-2023, email us at support@SaltwaterEddies.com or speak with someone at Aqua Medic of North America via their website contact info ( Sales: +1 970.776.8629 / +1 877.323.2782) to answer any questions you may have about any Aqua Medic Products. Catalog: copy and paste the link below or click on "click here for more information" to see or download the catalog: http://www.aqua-medic.com/ Thanks for shopping! http://www.saltwatereddies.com/content-product_info/product_id-2205/aqua_medic_catalog_of_products.html http://www.saltwatereddies.com/images/products/AquaMedic.jpg http://www.saltwatereddies.com/content-product_info/product_id-2205/aqua_medic_catalog_of_products.html From The Leader in Aquarium Water Treatment, AuqaFX The Great White is a Reverse Osmosis and Deionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, 3 DOW membranes, and 3 color indicting deionization (DI) resin cartridges. GREAT WHITE 9 STAGE RO/DI SYSTEM 300 GPD Includes: Inline TDS Meter Membrane Flush Kit Ports for RO or RO/DI Automatic Shutoff Additional Features: * 125 PSI pressure tested vessels * Three TFC 100 GPD membranes * All Fittings are Quick Connect * Membrane Flush Kit * Aquatec 8800 Booster Pump (Built In) * In Line TDS Water Purity Meter * Built In Test Port between RO and DI * Clear Filter housings BULKY ITEM. PLEASE EMAIL OR CAL FOR SHIPPING QUOTE Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1850/great_white_9_stage_ro_di_300_gpd.html http://www.saltwatereddies.com/images/products/Great_white_ro-di_water_filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1850/great_white_9_stage_ro_di_300_gpd.html 57 watt Aqua Ultraviolet sterilizer, 2 inch white unit with wiper. As a sterilizer: Maximum flow rate: 3200 GPH, capacity: 1500-3000 gallons. As a clarifier: Maximum flow rate: 3500 GPH, capacity: Up to 8500 gallons which may require 50% - 70% plant coverage. For salt water applications: 225 gallons. Dimensions: 28 inch x 4 inch x 2.5 inch (LxWxH). Wiper needs 16 inch clearance. Shipment Dimensions: * Weight: 8 lb * Height: 24 in * Width: 6 in * Depth: 6 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1779/57_watt_aqua_2_inch_uv_sterilizer_with_wiper.html http://www.saltwatereddies.com/images/products/Uv_strilizer_Wiper.jpg http://www.saltwatereddies.com/content-product_info/product_id-1779/57_watt_aqua_2_inch_uv_sterilizer_with_wiper.html Ultraviolet is a proven dependable and effective method of controlling algae and harmful bacteria without leaving any residuals in the water. Aqua Ultraviolet utilizes the highest quality components designed to work perfectly together to maximize kill rates and ensure ease of installation and maintenance. There is no need to by pass or adjust your water flow. Our units will perform at or above stated levels throughout the life of the lamp. Used as a sterilizer, the Classic 57 Watt UV is the premium choice for 1500-3000 gallons of fresh water or up to 355 gallons of salt water. Used as a clarifier, the Classic 57 Watt can treat up to 6500 gallons of fresh water that has 50% to 75% plant coverage. Aqua Ultraviolet Sterilizers will clear your water in 3-5 days sometimes overnight and keep it that way. Performance is guaranteed when sized, installed and operated according to our instructions. Features: * Easy Twist Cap For Easy Quartz Sleeve Maintenance Just One Cap To Twist For Access To The Quartz Sleeve. * Quick Release T`s For Easy Installation And Winterization. * Lamp Is Positioned In The Housing For Maximum UV Effectiveness. * Slender Housing Design Allows For Higher UV Dosage. * The Unit Is Designed For Maximum Flow Rates. * Easy To Remove Remote Power Supply. * Designed For Indoor or Out Door Use. Shipment Dimensions: * Weight: 8 lb * Height: 24 in * Width: 6 in * Depth: 6 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1419/57_watt_aqua_uv_sterilizer_2_in_white.html http://www.saltwatereddies.com/images/products/Auqa_UV_sterilizer_2.jpg http://www.saltwatereddies.com/content-product_info/product_id-1419/57_watt_aqua_uv_sterilizer_2_in_white.html Storage tank for reverse osmosis or RO/DI water. Provides pressurized output, great for use with faucets or point of use applications. Comes complete with Tank Ball Valve and Small Plastic Stand for the Tank. Storage reservoirs are made with a FDA APPROVED food grade material. Larger Sizes Available, Call Today! WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout http://www.saltwatereddies.com/content-product_info/product_id-2149/4_gallon_bladder_pressure_tank.html http://www.saltwatereddies.com/images/products/4_gal_pressure_tank.jpg http://www.saltwatereddies.com/content-product_info/product_id-2149/4_gallon_bladder_pressure_tank.html 100 Gallon Storage Tank MSRP Price per Unit (piece): $229.00 This system conforms to all AquaFX systems including the 3-stage Dolphin, the 4-stage Barracuda, the 5-stage Mako Ultra DI & the ultimate 9-stage Great White. We recommend this option to any reef keeper who travels or has a busy schedule! Simply plug in the system and we do the rest! Storage reservoirs are made with a FDA APPROVED food grade material (polypropylene) and include a fitted lid. ***PLEASE CALL FOR SHIPPING RATES*** WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2147/100_gallon_storage_tank.html http://www.saltwatereddies.com/images/products/100water_storage_tank.jpg http://www.saltwatereddies.com/content-product_info/product_id-2147/100_gallon_storage_tank.html The Mako is a Reverse Osmosis and De-ionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and 2 color indicting deionization (DI) resin cartridges. The Mako offers the following features: * High efficiency 1-micron sediment pre-filter * 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters * High flow / high rejection TFC membrane * High-efficiency color-changing DI cartridge * 160 PSI pressure gauge marked with operating and unsafe ranges * In-Line TDS meter (Included) * Solid Aluminum no-rust metal mounting bracket * Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. This model comes with free TDS meter. 14 x 8 x 10 inches 14 lbs. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1861/mako_5_stage_ro_di_300_gpd.html http://www.saltwatereddies.com/images/products/Mako_rodi_standard_m.jpg http://www.saltwatereddies.com/content-product_info/product_id-1861/mako_5_stage_ro_di_300_gpd.html The Mako is a Reverse Osmosis and De-ionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and 2 color indicting deionization (DI) resin cartridges. The Mako offers the following features: * High efficiency 1-micron sediment pre-filter * 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters * High flow / high rejection TFC membrane * High-efficiency color-changing DI cartridge * 160 PSI pressure gauge marked with operating and unsafe ranges * In-Line TDS meter (Included) * Solid Aluminum no-rust metal mounting bracket * Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. This model comes with free TDS meter. 14 x 8 x 10 inches 14 lbs. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1859/mako_5_stage_ro_di_100_gpd.html http://www.saltwatereddies.com/images/products/Mako_rodi_standard_m.jpg http://www.saltwatereddies.com/content-product_info/product_id-1859/mako_5_stage_ro_di_100_gpd.html The Mako is a Reverse Osmosis and De-ionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and 2 color indicting deionization (DI) resin cartridges. The Mako offers the following features: * High efficiency 1-micron sediment pre-filter * 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters * High flow / high rejection TFC membrane * High-efficiency color-changing DI cartridge * 160 PSI pressure gauge marked with operating and unsafe ranges * In-Line TDS meter (Included) * Solid Aluminum no-rust metal mounting bracket * Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. This model comes with free TDS meter. 14 x 8 x 10 inches 14 lbs. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1860/mako_5_stage_ro_di_200_gpd.html http://www.saltwatereddies.com/images/products/Mako_rodi_standard_m.jpg http://www.saltwatereddies.com/content-product_info/product_id-1860/mako_5_stage_ro_di_200_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX Dual Inline TDS Meter Measure the tap water coming in vs. the purified water going out of your system at any time. Use the monitor to determine when the filters need to be changed. Install the meter for your customers so they'll always know how their system is performin FEATURES * Displays TDS levels of the feed water and product water with in & out electrode probes. * Highly efficient and accurate due to its advanced microprocessor technology. * Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. * Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) * Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. * Comes equipped with John Guest Quick-Connect T-fittings as shown. * Installs quickly and easily. SPECIFICATIONS * Range: 0-9990 ppm * Accuracy: 2% * Cable Length: 24.5" (including sensor) * Fittings: 1/4" standard, also available with 3/8" or 1/2" * Power source: 2 x 1.5V button cell batteries (included) * Battery life: approx. 1000 hours of continuous use * Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) * Weight: 79.4 g (2.8 oz.) Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1851/dual_inline_tds_meter.html http://www.saltwatereddies.com/images/products/Dual_inline_tds_meter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1851/dual_inline_tds_meter.html EACH Standard SYSTEM IS EQUIPPED WITH THE FOLLOWING: From The Leader in Aquarium Water Treatment, AuqaFX Quick Connect Fittings (Very User Friendly) Pressure Gauge (Pre-filter change indicator) Aluminum Brackets (Never Rust) Each system is hand built in the USA Pressure tested above normal PSI standards 3-stage reverse osmosis water treatment system complete with 1-micron sediment filter, 2-micron chlorine-guzzler carbon filter, high flow/high rejection Dow Filmtec TFC RO membrane, RO membrane flush kit, 160 PSI pressure gauge, filter-wrench, shut-off valve, kitchen sink adapter and garden hose adapter. Built with John Guest style quick-disconnect fittings, heavy-duty corrosion resistant aluminum bracket, and clear canisters. Output: approximately 50 gpd (gallons per day). Back by a 3-Year manufacturer limited warranty. Add hand held TDS meter for $15 14 x 5.5 X 16 inches 7 lbs Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1737/dolphin_3_stage_ro_50_gpd.html http://www.saltwatereddies.com/images/products/Dolphin_ro_water_filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1737/dolphin_3_stage_ro_50_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX EACH Standard SYSTEM IS EQUIPPED WITH THE FOLLOWING: Quick Connect Fittings (Very User Friendly) Pressure Gauge (Pre-filter change indicator) Aluminum Brackets (Never Rust) Each system is hand built in the USA Pressure tested above normal PSI standards 3-stage reverse osmosis water treatment system complete with 1-micron sediment filter, 2-micron chlorine-guzzler carbon filter, high flow/high rejection Dow Filmtec TFC RO membrane, RO membrane flush kit, 160 PSI pressure gauge, filter-wrench, shut-off valve, kitchen sink adapter and garden hose adapter. Built with John Guest style quick-disconnect fittings, heavy-duty corrosion resistant aluminum bracket, and clear canisters. Output: approximately 300 gpd (gallons per day). Back by a 3-Year manufacturer limited warranty. Add hand held TDS meter for $15 14 x 5.5 X 16 inches 7 lbs Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1857/dolphin_3_stage_ro_300_gpd.html http://www.saltwatereddies.com/images/products/Dolphin_ro_water_filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1857/dolphin_3_stage_ro_300_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX EACH Standard SYSTEM IS EQUIPPED WITH THE FOLLOWING: Quick Connect Fittings (Very User Friendly) Pressure Gauge (Pre-filter change indicator) Aluminum Brackets (Never Rust) Each system is hand built in the USA Pressure tested above normal PSI standards 3-stage reverse osmosis water treatment system complete with 1-micron sediment filter, 2-micron chlorine-guzzler carbon filter, high flow/high rejection Dow Filmtec TFC RO membrane, RO membrane flush kit, 160 PSI pressure gauge, filter-wrench, shut-off valve, kitchen sink adapter and garden hose adapter. Built with John Guest style quick-disconnect fittings, heavy-duty corrosion resistant aluminum bracket, and clear canisters. Output: approximately 200 gpd (gallons per day). Back by a 3-Year manufacturer limited warranty. Add hand held TDS meter for $15 14 x 5.5 X 16 inches 7 lbs Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1858/dolphin_3_stage_ro_200_gpd.html http://www.saltwatereddies.com/images/products/Dolphin_ro_water_filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1858/dolphin_3_stage_ro_200_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX EACH Standard SYSTEM IS EQUIPPED WITH THE FOLLOWING: Quick Connect Fittings (Very User Friendly) Pressure Gauge (Pre-filter change indicator) Aluminum Brackets (Never Rust) Each system is hand built in the USA Pressure tested above normal PSI standards 3-stage reverse osmosis water treatment system complete with 1-micron sediment filter, 2-micron chlorine-guzzler carbon filter, high flow/high rejection Dow Filmtec TFC RO membrane, RO membrane flush kit, 160 PSI pressure gauge, filter-wrench, shut-off valve, kitchen sink adapter and garden hose adapter. Built with John Guest style quick-disconnect fittings, heavy-duty corrosion resistant aluminum bracket, and clear canisters. Output: approximately 100 gpd (gallons per day). Back by a 3-Year manufacturer limited warranty. Add hand held TDS meter for $15 14 x 5.5 X 16 inches 7 lbs Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1856/dolphin_3_stage_ro_100_gpd.html http://www.saltwatereddies.com/images/products/Dolphin_ro_water_filter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1856/dolphin_3_stage_ro_100_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX The Barracuda offers the following features: High efficiency 1-micron sediment pre-filter 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters High flow/ high rejection TFC membrane High-efficiency color-changing DI cartridge 160 PSI pressure gauge marked with operating and unsafe ranges In-Line TDS meter (Add Inline TDS Meter for $18 on this model) Solid Aluminum no-rust metal mounting bracket Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1855/barracuda_4_stage_ro_di_200_gpd.html http://www.saltwatereddies.com/images/products/Barracuda.jpg http://www.saltwatereddies.com/content-product_info/product_id-1855/barracuda_4_stage_ro_di_200_gpd.html UV Lamp ( Aqua Engineering & Equipment ) This UV ultraviolet water disinfecting lamp comes easy to install with 1/4" quick connect fittings to destroy biological pathogens between the post filter and the faucet. * Easy change bulb lasts one year * 110V 60Hz * 1500GPD Flow Rate * 11" x 1.9" * Works on giardia, cryptosporidium, coliforms, bacteria, viruses and other biological pathogens * "End glow cap" gives visual confirmation that lamp is on * Great addition to any reverse osmosis system to ensure the most biologically safe water supply. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1862/uv_lamp_filter_add_on.html http://www.saltwatereddies.com/images/products/Uv_add_on.jpg http://www.saltwatereddies.com/content-product_info/product_id-1862/uv_lamp_filter_add_on.html The smallest and lightest TDS meter on the market. - Sleek design is perfect for personal or consumer use. - Advanced microprocessor technology. - Hold Function: saves measurements for convenient reading and recording. - Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. - Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. From 1000 to 9990 ppm, the resolution is in increments of 10 ppm, indicated by a blinking 'x10' image. - Display: large and easy-to-read LCD screen. - Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Specifications - Range: 0 - 9990 ppm (mg/L) - Resolution: 1 ppm - Accuracy: +/- 2% - ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) - Power source: 2 x 1.5V button cell batteries (included) - Battery life: 1000 hours of usage - Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55 inches) - Weight: 34g (1.2 oz) Shipment Dimensions: * Weight: 0.05 lb * Height: 9 in * Width: 3 in * Depth: 1 in California Sales Tax Notice and Washington State Sales Tax Notice: CA and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1906/tds_4_pocket_size_meter.html http://www.saltwatereddies.com/images/products/Tds_meter.JPG http://www.saltwatereddies.com/content-product_info/product_id-1906/tds_4_pocket_size_meter.html The NH2CL (Chloramine) Blaster upgrade kit, will remove the chlorine + ammonia also known as chloramines before passing through the reverse osmosis membrane, therefore extending the life of your membranes and deionization (DI) filters. Our NH2CL Blaster filters also have a longer life span then the standard carbon block. The NH2CL (Chloramine) blaster works effectively only when run in series to allow enough contact time with the water, that is why an extra canister is provided. To install this upgrade: * You transfer your first sediment filter into the single canister provided * Discard your current carbon block, and place the 2 NH2CL Filters in the 2 empty canisters on your system. * Use the provided tube to connect the single canister with sediment filter to the beginning of your system, and * Connect the feed line to the sediment filter. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1864/nh2cl_chloramine_blaster_upgrade_kit.html http://www.saltwatereddies.com/images/products/AddONChlorimine.jpg http://www.saltwatereddies.com/content-product_info/product_id-1864/nh2cl_chloramine_blaster_upgrade_kit.html The Mako is a Reverse Osmosis and De-ionization system. The standard unit comes with 1-micron sediment filtration, a carbon block for VOC reduction, a DOW membrane, and 2 color indicting deionization (DI) resin cartridges. The Mako offers the following features: * High efficiency 1-micron sediment pre-filter * 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters * High flow / high rejection TFC membrane * High-efficiency color-changing DI cartridge * 160 PSI pressure gauge marked with operating and unsafe ranges * In-Line TDS meter (Included) * Solid Aluminum no-rust metal mounting bracket * Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. This model comes with free TDS meter. 14 x 8 x 10 inches 14 lbs. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1740/mako_5_stage_ro_di_50_gpd.html http://www.saltwatereddies.com/images/products/Mako_rodi_standard_m.jpg http://www.saltwatereddies.com/content-product_info/product_id-1740/mako_5_stage_ro_di_50_gpd.html High quality color changing replacement deionization resin. This item is purchased by the cubic foot, directly from Aqua-FX, The Leader in Aquarium Filtration Systems". One cubic foot = 40 lbs. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1865/color_changing_di_resin_media_1_cubic_foot.html http://www.saltwatereddies.com/images/products/Color_changing_resin_media.jpg http://www.saltwatereddies.com/content-product_info/product_id-1865/color_changing_di_resin_media_1_cubic_foot.html From The Leader in Aquarium Water Treatment, AuqaFX: Add-on upgrades purchased on unit(s) will be installed and tested prior to shipping. Shown here is the Dolphin RO upgraded with the chloramine removal filters. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1852/chloramine_removal_upgrade.html http://www.saltwatereddies.com/images/products/AddONChlorimine.jpg http://www.saltwatereddies.com/content-product_info/product_id-1852/chloramine_removal_upgrade.html From The Leader in Aquarium Water Treatment, AuqaFX The Barracuda offers the following features: High efficiency 1-micron sediment pre-filter 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters High flow/ high rejection TFC membrane High-efficiency color-changing DI cartridge 160 PSI pressure gauge marked with operating and unsafe ranges In-Line TDS meter (Add Inline TDS Meter for $18 on this model) Solid Aluminum no-rust metal mounting bracket Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1846/barracuda_4_stage_rodi_50_gpd.html http://www.saltwatereddies.com/images/products/Barracuda.jpg http://www.saltwatereddies.com/content-product_info/product_id-1846/barracuda_4_stage_rodi_50_gpd.html From The Leader in Aquarium Water Treatment, AuqaFX The Barracuda offers the following features: High efficiency 1-micron sediment pre-filter 2-micron chlorine guzzler carbon block pre-filter or our exclusive chlorine and chloramine-removal filters High flow/ high rejection TFC membrane High-efficiency color-changing DI cartridge 160 PSI pressure gauge marked with operating and unsafe ranges In-Line TDS meter (Add Inline TDS Meter for $18 on this model) Solid Aluminum no-rust metal mounting bracket Clear 10" filter cartridge housings. All systems include quick connect fittings, a shut off valve, a filter wrench for easy cartridge replacement, and your choice of a feed adapter. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1854/barracuda_4_stage_rodi_300_gpd.html http://www.saltwatereddies.com/images/products/Baracuda_ro-di_filter_sys.jpg http://www.saltwatereddies.com/content-product_info/product_id-1854/barracuda_4_stage_rodi_300_gpd.html Worlds most Efficient 200 GPD RO/DI machine from AquaFX! AquaFX is proud to release the newest in a line of Green and Efficient RO units, the first of which is the Octopus RO/DI unit. At a glance, the Octopus seems pretty simplistic. But take a closer look and you will see a marvel! Efficiency is the game, and this unit is the King. You can look forward to unique features such as. The Octopus includes such features as: *Microprocessor Controlled 1:1 Waste water Ratio *High Pressure Bracket Mounted Booster Pump (Located Post Pre-filtration for extended pump life) *Extended DI life via automatic Membrane Flush upon Start-up (Greatly prolong DI life by flushing TDS Creep upon startup!) *Cyclic Membrane Flush (Full Membrane Flush upon shutdown to help prevent membrane scaling) *Built in TDS meter with full (0-99)ppm range *High and Low Pressure Kill Switches (For pump protection and full system automation) This RO/DI unit is setup for greatest filter life, with least amount of waste! All units are made, tested and supported in the USA. Washington State Sales Tax Notice: WA orders only will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2144/aquafx_octopus_200_gpd_ro_di_unit.html http://www.saltwatereddies.com/images/products/BarOct.jpg http://www.saltwatereddies.com/content-product_info/product_id-2144/aquafx_octopus_200_gpd_ro_di_unit.html Worlds most Efficient 100 GPD RO/DI machine from AquaFX! AquaFX is proud to release the newest in a line of Green and Efficient RO units, the first of which is the Octopus RO/DI unit. At a glance, the Octopus seems pretty simplistic. But take a closer look and you will see a marvel! Efficiency is the game, and this unit is the King. You can look forward to unique features such as. The Octopus includes such features as: *Microprocessor Controlled 1:1 Waste water Ratio *High Pressure Bracket Mounted Booster Pump (Located Post Pre-filtration for extended pump life) *Extended DI life via automatic Membrane Flush upon Start-up (Greatly prolong DI life by flushing TDS Creep upon startup!) *Cyclic Membrane Flush (Full Membrane Flush upon shutdown to help prevent membrane scaling) *Built in TDS meter with full (0-99)ppm range *High and Low Pressure Kill Switches (For pump protection and full system automation) This RO/DI unit is setup for greatest filter life, with least amount of waste! All units are made, tested and supported in the USA. Washington State Sales Tax Notice: WA orders only will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2143/aquafx_octopus_100_gpd_ro_di_unit.html http://www.saltwatereddies.com/images/products/BarOct.jpg http://www.saltwatereddies.com/content-product_info/product_id-2143/aquafx_octopus_100_gpd_ro_di_unit.html 50 GPD; TFC Aqua Engineering & Equipment membrane made from DOW TFC Sheets, BEST on the market. You cant find this anywhere else! Model # TF-1812-50 EXCELLENT 98% Stabilized Salt rejection, don't risk your tank! Aqua Engineering & Equipment RO Membranes At last there is a TRUE Thin Film Composite (TFC) Reverse Osmosis Membrane from AquaFX. Using only DOW's TFC material; Dow TFC has long been recognized as the premier material for manufacturing membranes, and they are made in the USA. Aqua Engineering & Equipment will fit any standard RO Membrane housing, so you can 'upgrade' your system to an Aqua Engineering & Equipment RO Membrane. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2146/50_gpd_reverse_osmosis_tfc_ro_membranes.html http://www.saltwatereddies.com/images/products/Membrane.jpg http://www.saltwatereddies.com/content-product_info/product_id-2146/50_gpd_reverse_osmosis_tfc_ro_membranes.html 57 watt TWIST Aqua Ultraviolet u.v. sterilizer with wiper. 2 inch inlet / outlet ports. White color. Includes bulb and quartz sleeve. Lifetime warranty on housing. Twist UV's are designed with a rotating union in the body for flexibility of installation. Easily place the inlet + outlet in a position to fit your plumbing. Ultraviolet is a proven dependable and effective method of controlling algae and harmful bacteria without leaving any residuals in the water. Aqua Ultraviolet utilizes the highest quality components designed to work perfectly together to maximize kill rates and ensure ease of installation and maintenance. There is no need to by pass or adjust your water flow. Our units will perform at or above stated levels throughout the life of the lamp. Used as a sterilizer, the Classic 57 Watt UV is the premium choice for 1500-3000 gallons of fresh water or up to 355 gallons of salt water. Used as a clarifier, the Classic 57 Watt can treat up to 6500 gallons of fresh water that has 50% to 75% plant coverage. Aqua Ultraviolet Sterilizers will clear your water in 3-5 days sometimes overnight and keep it that way. Performance is guaranteed when sized, installed and operated according to our instructions. Shipment Dimensions: * Weight: 8 lb * Height: 24 in * Width: 6 in * Depth: 6 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1780/57_watt_twist_uv_sterilizer_with_wiper.html http://www.saltwatereddies.com/images/products/UvWiper.jpg http://www.saltwatereddies.com/content-product_info/product_id-1780/57_watt_twist_uv_sterilizer_with_wiper.html Ultraviolet is a proven dependable and effective method of controlling algae and harmful bacteria without leaving any residuals in the water. Aqua Ultraviolet utilizes the highest quality components designed to work perfectly together to maximize kill rates and ensure ease of installation and maintenance. There is no need to by pass or adjust your water flow. Our units will perform at or above stated levels throughout the life of the lamp. Used as a sterilizer, the Classic 25 Watt UV is the premium choice for 500-1200 gallons of fresh water or up to 150 gallons of salt water. Used as a clarifier, the Classic 25 Watt can treat up to 4000 gallons of fresh water that has 50% to 75% plant coverage. Aqua Ultraviolet Sterilizers will clear your water in 3-5 days sometimes overnight and keep it that way. Performance is guaranteed when sized, installed and operated according to our instructions. Features: * Easy Twist Cap For Easy Quartz Sleeve Maintenance Just One Cap To Twist For Access To The Quartz Sleeve. * Quick Release T`s For Easy Installation And Winterization. * Lamp Is Positioned In The Housing For Maximum UV Effectiveness. * Slender Housing Design Allows For Higher UV Dosage. * The Unit Is Designed For Maximum Flow Rates. * Easy To Remove Remote Power Supply. * Designed For Indoor or Out Door Use. Shipment Dimensions: * Weight: 7.45 lb * Height: 24 in * Width: 7 in * Depth: 6 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1191/25_watt_aqua_uv_sterilizer_3_4_in.html http://www.saltwatereddies.com/images/products/AuqaUV2.jpg http://www.saltwatereddies.com/content-product_info/product_id-1191/25_watt_aqua_uv_sterilizer_3_4_in.html Helix Max 11 W, Dimensions housing: 12 x 3.5 in. Washington State Sales Tax Notice: WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2057/aqua_medic_11_w_uv_sterilizer.html http://www.saltwatereddies.com/images/products/AM_UV.jpg http://www.saltwatereddies.com/content-product_info/product_id-2057/aqua_medic_11_w_uv_sterilizer.html Submersible U.V. 20 watt with Halo indicator and 18 foot power cord, barbed 3/4 inch input-output fittings. Suitable for medium ponds up to 3000 gallons with pumps up to 1800 gph. Two glowing monitor halo rings. Complete with 9000 hour, long life 20 watt lamp and water tight quartz sleeve. Shipment Dimensions: * Weight: 4.6 lb * Height: 21 in * Width: 7 in * Depth: 5 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1784/20_watt_submersible_ultraviolet_clarifier.html http://www.saltwatereddies.com/images/products/UV_20_sterilizer.jpg http://www.saltwatereddies.com/content-product_info/product_id-1784/20_watt_submersible_ultraviolet_clarifier.html RK2 RK1000-PE Commercial Protein Fractionator with Plastic HDPE body. 84 inch diameter by 148 inch height Dual automatic wash down system. Rated capacity up to 120,000 gallons. 1000 gallons per minute at 2 minutes dwell time. 1500 gallons per minute at 1.5 minutes dwell time. Includes four energy efficient venturi pumps operating at 220 volts using 12.3 amps each. 84 inch by 108 inch basal dimensions. REQUIRES FEED PUMP. This item is drop shipped from the manufacturer. Shipment Dimensions: * Weight: 969 lb * Height: 48 in * Width: 24 in * Depth: 24 in CALL OR EMAIL FOR SHIPPING QUOTE California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1936/rk2_rk1000_pe_commercial_protein_fractionator.html http://www.saltwatereddies.com/images/products/RK2_RK1000-PE_Commercial_Protein_Fractionator.jpg http://www.saltwatereddies.com/content-product_info/product_id-1936/rk2_rk1000_pe_commercial_protein_fractionator.html RK2 RK600-PE Protein Fractionator with Plastic HDPE body. Clear acrylic top. 60 inch diameter by 144 inch height Automatic wash down system. Rated capacity up to 36,000 gallons. 600 gallons per minute at 2 minute dwell time. Includes dual 1-1/2 HP venturi pumps operating at 230 volts. REQUIRES FEED PUMP. This item is drop shipped from the manufacturer. Shipment Dimensions: * Weight: 650 lb * Height: 160 in * Width: 72 in * Depth: 60 in CALL OR EMAIL FOR SHIPPING QUOTE California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1937/rk2_rk600_pe_protein_fractionator.html http://www.saltwatereddies.com/images/products/RK2_RK600-PE_Protein_Fractionator.jpg http://www.saltwatereddies.com/content-product_info/product_id-1937/rk2_rk600_pe_protein_fractionator.html UTC 3200 Modular Canister Filter with Priming Plunger 581 gph 4.74 gallon volume ViaAqua professional Canister Filters are designed to be one of the most efficient water filtration systems on the market. The water is forced through large filter media containers eliminating water channeling and water bypass. The multi stage filtering containers hold large amounts of filtering medias for maximum filtration. The stackable filter media containers come with a bio sponge and white polishing filter pad. The media containers can be filled with your choice of bio media, carbon and/or other resins. The motor has a build in shut off valve and quick release hose connectors, recessed water seal gasket and large lock clamps to secure the motor to the canister body. The ViaAqua Canister Filter quietly and efficiently filters aquatic environments from 20 gal. to 300 gal. Features: Design to support aquatic life and engineered for the hobbyist Standard UTC model equipped with priming plunger that helps with the initial setup Easy to set up, install and maintain Modular design for variety filter medias Distinctively superior filtering system High performance external filter Heavy duty latches Watertight seal Filtering baskets with separate grips for various filtering media allowing efficient four steps filtration: mechanical, biological, chemical and UV Sterilizer (for UV model only) Durable ceramic shaft Anti slip rubber feet For fresh and marine environments Oil free motor. Includes Tubing. Shipment Dimensions: * Weight: 23.15 lb * Height: 17.5 in * Width: 17 in * Depth: 13 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. For CA orders Only: please add 8.75% State Tax http://www.saltwatereddies.com/content-product_info/product_id-1766/utc_3200_modular_canister_filter_w_priming_plunger.html http://www.saltwatereddies.com/images/products/UTC 3400 Modular Canister Filter with Priming Plunger.jpg http://www.saltwatereddies.com/content-product_info/product_id-1766/utc_3200_modular_canister_filter_w_priming_plunger.html Seachem PhosGuard 20 Liters (5.3 gal) PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products Why It Is Different PhosGuard is spherical. Its shape allows for maximum water flow through the media. Granular phosphate removers can become compacted, dramatically limiting their capacity to remove phosphate. If the media can not come into contact with the water, it can not remove phosphate from it. PhosGuard is the only spherical phosphate remover on the market. In recent years, there has been speculation that aluminum oxide based phosphate removers like PhosGuard release aluminum into the water and subsequently damage corals. The evidence to support this claim was largely anecdotal. So, through a series of controlled experiments in both freshwater and saltwater, we intended to address both the question of aluminum solubility and aluminum toxicity. The results of these experiments show that under reef conditions (pH near 8) there is no detectable soluble aluminum released from alumina. Additionally, aluminum oxide is not easily absorbed into the cell to cause negative reactions. Even at three times the dose of PhosGuard, soft-bodied corals such as Sarcophyton remain unaffected. DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1 cup) for every 300 L (75 gallons*). Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest: Phosphate or MultiTest: Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Each 500 mL of PhosGuard treats over 600 L (150 gallons*) (i.e. will remove up to 30 mg/L phosphate in 600 L (100 gallons*) of water, depending on the initial phosphate/silicate concentrations and the current biological load. Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities. Caution! May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater (e.g. 250 mL of product in 500 mL water), followed by a rinse. Shipment Dimensions: * Weight: 44 lb * Height: 20 in * Width: 13 in * Depth: 13 in California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1907/seachem_phosguard_20_liters.html http://www.saltwatereddies.com/images/products/20L_PhosGuard_.jpg http://www.saltwatereddies.com/content-product_info/product_id-1907/seachem_phosguard_20_liters.html