Saltwater Eddies, LLC | Saltwater Instrument Controllers http://www.saltwatereddies.com/ Fri, 10 Feb 2012 22:04:07 -0600 en Manufacturer: Neptune Systems Dimensions: Base Unit: 7.5" x 2.6" x 1.1"; Display Module: 3.4" x 4.1" x 0.7"; EB8: 10.0" x 3.8" x 1.8" (L x W x H) Availability: In Stock - Usually ships in 24 hours Item #: NEP6003 Package Includes: - Apex Base Unit - Temperature Probe w/ 10' Cable - Apex Display Module w/ 10' AquaBus Cable - Energy Bar 8 Module - 6' AquaBus Cable - Ethernet Cable - Standard Grade pH probe - pH 7.0 and 10.0 Calibration Fluid (2/ea) - Owner's Manual Built-In Controller Functionality: 1. Monitor & Control pH, Temp, and ORP: Capable of monitoring and controlling pH, temperature and ORP. Instead of monitoring ORP the unit may also be used to monitor and control 2 different pH sources at the same time. 2. Sunrise and Sunset Simulation: Capable of varying the length of the day throughout the year to produce a more realistic simulation of natural lighting conditions. Used to make the length of daylight hours longer in the summer than in the winter. 3. Moon Cycle Simulation: In conjunction with a Lunar Simulator is capable of varying the intensity of light emitted from the LED's to produce a more realistic simulation of the actual lunar cycle. With this artificial moon cycle simulation it may be possible to induce corals and fish to spawn. 4. Wavemaker & Other Timed Cycles: Capable of controlling up to 20 pumps or other devices over a random or fixed period of time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Day of Week functionality allows devices to run on specific, user defined days of the week. 5. Feed Mode: A variable length feed timer capable of disabling a set of user defined pumps for a set period of time. 6. Six Digital Inputs: Equipped with 6 TTL level external inputs which can activate/deactivate equipment in response to an external stimulus. Applications include connection to water level float switches, water pressure and flow sensors and water on the floor sensors. 7. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. 8. Light Dimming Control: Dim ballasts with 0 to 10V interfaces like some T5 ballasts. 9. Fail-safe Control: During communication failures Energy Bar 8 outlets revert to user defined settings. 10 System Alarm: Email or text message alert when a monitored condition exceeds a preset value. 11. Power Failure Alarm & Power Back-Up: Email or audible alarms when the power for the Energy Bar 8 fails. Alternate AC port allows base unit to be plugged into a UPS (uninterrupted power supply) to keep it running and accessible even during a complete power outage. Features: 1. Expandable: Built-in, 2 Port AquaBus hub allows the easy addition of other AquaBus accessories. Up to 240 AquaBus modules can be connected together to control more than 1000 independent outlets and monitor more than 100 different probes or digital inputs. Supports AquaBus cable lengths up to 200+ ft. 2. Plug and Play: Automatically recognizes and configures other AquaBus modules like an Energy Bar 8. 3. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than competitive controllers. Capable of storing 1 year's worth of data logs internally. 4. Easy Software Upgrades: Download updates and new features from the web and upgrade entire system directly through AquaBus links. There is no need to disassemble the controller and individually update each AquaBus module. 5. Stable Operating System: High reliability protocol with robust error correction. 6. Increased Reliability & Accuracy: Galvanic isolation on the probes results in much more reliable and accurate probe readings. 7. Backward Compatibility: All AquaController 3 accessories work with the AquaController Apex including the PX 1000 Expansion Module, I/O breakout box, DC8, DC4, DC4HD, AquaSurf and all Lunar Simulators. 8. Enhanced Precision: Sub minute control on all Energy Bar 8 controlled devices. Set-Up: 1. Easy To Interface: Quick, intuitive and flexible menu navigation for simple set-up of pumps, lights, heaters, chiller, CO2, etc. 2. Easy To Use Technology: No programming required for configuration and unlike other products the ability to assign unique names to each of the outlets. 3. Multiple Set-Up Options: Can be configured through Apex Display Module or a standard web browser. 4. Enhance Programming Language: Allows for sophisticated, non-standard control including virtual outlets that provide even more complex control options. Connectivity: 1. Embedded Web Server: Monitor, control and configure controller from the web. Compatible with Internet Explorer, Firefox and Safari. 2. Ethernet Interface: Built-in Ethernet port. 3. Wireless Compatible: With the addition of a wireless bridge or game adapter (802.11x) wireless communication is possible. 4. Real Time Data Graphing: Interactive flash graphing application built into the web server. 5. iPhone Compatible: Interfaces with AquaNotes iPhone application. 6. RSS and XML Support. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2315/apex_w_display_module_std_ph_temp_probe_eb8.html http://www.saltwatereddies.com/images/products/apex_package.jpg http://www.saltwatereddies.com/content-product_info/product_id-2315/apex_w_display_module_std_ph_temp_probe_eb8.html UPC: 8027876011130 Elos OsmoController Digital Water Level Controller The entirely new OSMOCONTROLLER Digital uses a patent pending sensor with no moving parts as the first measure of the water level in the SUMP. Most other systems will use multiple float switches or sensors to act as back up to the initial float switch, elos does not. We believe the float switch or sensor will always be the weak link as it is usually a moving part and/or in direct contact with the water, most of the time. To provide an adequate fail-safe the OSMOCONTROLLER Digital uses a small microprocessor in combination with our patent pending sensor to control the pump and monitor the top off of your system. In the event of a fault such as an empty reservoir, a damaged pump or kinked tube, the microprocessor will recognize this and a red alarm LED will indicate the problem and stop pumping until the problem is fixed and the controller can be reset. The OSMOCONTROLLER Digital also has a manual top off button that can be used to use the system as a pump for occasional water changes and to fill a container with RO/DI water easily. The set up of the OSMOCONTROLLER Digital is very simple. It works with most sumps without the need for programming and with our sensor design has a built in buffer for waves and small changes in the sump that will normally cause a top off system to unnecessarily top off, which will shorten the useable life of the top off pump. Key Benefits of the OSMOCONTROLLER Digital: * No moving parts * Very easy setup. (System runs a 5 minutes self-diagnostic test when it is first plugged in.) * Maintains a very accurate level, very important in marine systems for a stable salinity level when keeping delicate animals. * Adapts to most aquarium/sump sizes automatically. Ca and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2565/elos_osmocontroller_digital_water_level_controller.html http://www.saltwatereddies.com/images/products/Elos_OsmoController_Digital.jpg http://www.saltwatereddies.com/content-product_info/product_id-2565/elos_osmocontroller_digital_water_level_controller.html HI 83203 is supplied with 2 cuvets, bottle for D.O. test, batteries, 12 V dc adapter and instructions. Hanna Bench Photometer Multiparameter Ion Specific Meter for Aquaculture. Tests for Ammonia HR-LR, free chlorine, total chlorine, copper HR-LR, nitrate, nitrite HR-LR, dissolved oxygen, pH, phosphate HR-LR. This item is a special order item that is drop shipped direct from Hanna. With the ever-increasing depletion of fish stocks in the open seas, aquaculture has gained prominence and can prove essential to our future dietary needs. Monitoring and controlling parameters such as the oxygen level as well as pH and nitrate content in water is vital in ensuring profitable fish production. Accurate control can prevent disease, increase production and even reduce the premiums on crop insurance. Research personnel, fish farm operators and wildlife specialists now have one compact and easy-to-use meter to keep a close tab on the most important parameters in aquaculture. Simply take a sample of water and place it in the unit to be zeroed. Add reagents to it and place it back in the HI 83203. The meter will then show you the relevant value in mg/L or g/L in clear digits on a large LCD. No need to match colors, calibrate probes or change membranes. All has been made simple so that you may get on with more rewarding tasks, such as producing more fish! Multi Parameter Specifications Parameter Range Method Reagent Code Ammonia LR 0.00 to 3.00 mg/L Nessler HI 93700-01 Ammonia MR 0.00 to 10.00 mg/L Nessler HI 93715-01 Chlorine, free 0.00 to 2.50 mg/L DPD HI 93701-01 Chlorine, total 0.00 to 3.50 mg/L DPD HI 93711-01 Copper HR 0.00 to 5.00 mg/L Bicinchoninate HI 93702-01 Copper LR 0 to 1000 g/L Bicinchoninate HI 95747-01 Nitrate 0.0 to 30.0 mg/L Cadmium reduction HI 93728-01 Nitrite HR 0 to 150 mg/L Ferrous sulfate HI 93708-01 Nitrite LR 0.00 to 0.35 mg/L Diazotation HI 93707-01 Oxygen, dissolved 0.0 to 10.0 mg/L Winkler HI 93732-01 pH 6.5 to 8.5 pH Phenol red HI 93710-01 Phosphate HR 0.0 to 30.0 mg/L Amino acid HI 93717-01 Phosphate LR 0.00 to 2.50 mg/L Ascorbic acid HI 93713-01 Shipment Dimensions: * Weight: 6 lb * Height: 14 in * Width: 10 in * Depth: 10 in CA and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2059/multi_parameter_photometer_83203_hanna_inst.html http://www.saltwatereddies.com/images/products/Hannah-83203.jpg http://www.saltwatereddies.com/content-product_info/product_id-2059/multi_parameter_photometer_83203_hanna_inst.html RK2 1000 mg-hr Ozone Generator WITH built in RK2 System's controller AND built in powered air dryer. Adjustable output with visual LED indicator. Includes ORP, pH, temperature controller and probes. One quarter inch comptression fitting outlet. Includes 20 feet of Teflon tubing with each unit. Shipment Dimensions: * Weight: 20 lb * Height: 18 in * Width: 12 in * Depth: 12 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1441/rk2_1000_mg_hr_ozone_generator.html http://www.saltwatereddies.com/images/products/RK2-ozone generator.JPG http://www.saltwatereddies.com/content-product_info/product_id-1441/rk2_1000_mg_hr_ozone_generator.html Aquiline Buschke CO2 Regulator. The regulator unit is completely chrome plated and has a fixed working pressure of 1.5 bar, a needle-valve for fine adjustments, and two pressure gauges showing both bottle and working pressure. The regulator fits every industry standard CO2 bottle with an external valve. 1 per case. The Aqua Medic CO2 Regulator is a precision German regulation valve for standard CO2 cylinders. High quality nickel plated brass housing operates at a fixed working pressure of 22 PSI and includes two pressure gauges to monitor both the cylinder and working pressures. For exacting bubble counts in critical applications like Calcium reactors and CO2 Reactors, the needle valve allows fine tuning and adjustment. Shipment Dimensions: * Weight: 1.45 lb * Height: 5 in * Width: 4.9 in * Depth: 3 in WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1437/aqua_medic_co2_regulator.html http://www.saltwatereddies.com/images/products/AquamedicCO2reg.jpg http://www.saltwatereddies.com/content-product_info/product_id-1437/aqua_medic_co2_regulator.html CO2 Reactor 500 M with integrated circulation pump (75gph/5watt) and mounting plate Shipment Dimensions: * Weight: 2 lb * Height: 9 in * Width: 8 in * Depth: 4 in WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2109/aquamedicusa_internal_co2_reactor_500m.html http://www.saltwatereddies.com/images/products/Aquamedic_CO2_reactor_M.jpg http://www.saltwatereddies.com/content-product_info/product_id-2109/aquamedicusa_internal_co2_reactor_500m.html CO2 Regulator with needle valve, solenoid valve, and bubble counter. Dual gauge regulator displays output pressure and bottle pressure. Standard American CO2 bottle connection.CO2 regulator by Milwaukee Instruments includes solenoid valve and bubble counter. Unit comes with dual gauges each with dual reading of both psi & kg/cm. Left gauge meters tank capacity and right gauge meters flow. Needle valve flow control provides for precise measurement. The solenoid valve comes with a 1.5 meter power cord. (CO2 bottle is not included). Recommended to be used with a pH controller Shipment Dimensions: * Weight: 2.45 lb * Height: 8 in * Width: 6 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1436/co2_regulator_w_needle_solenoid_valve_bubble.html http://www.saltwatereddies.com/images/products/CO2regulMilwakee.jpg http://www.saltwatereddies.com/content-product_info/product_id-1436/co2_regulator_w_needle_solenoid_valve_bubble.html Red Sea CO2 Pro System for standard CO2 cylinders (CO2 cylinder not included). Includes Red Sea Reactor 500, CO2 Regulator, high precision in-line Needle Valve, Bubble Counter with integrated check valve, real time CO2 monitor, and 3 meters of CO2 tubing. Shipment Dimensions: * Weight: 3.3 lb * Height: 16 in * Width: 14 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1591/red_sea_co2_pro_system_for_standard_co2.html http://www.saltwatereddies.com/images/products/RedSeaa_Co2_pro_std.jpg http://www.saltwatereddies.com/content-product_info/product_id-1591/red_sea_co2_pro_system_for_standard_co2.html Red Sea AquaZone 50 mg/hr ozonizer AquaZone 5050 mg/hr with 250cc Air Drier Applying ozone to your tank raises the ORP, increasing oxygen levels and decreasing dissolved wastes; ozone also effectively kills numerous harmful pathogens. AquaZone ozonizer`s corona discharge technology provides higher ozone concentration than UV bulb style ozonizers and allows variable ozone output. Just dial in the amount of ozone that your tank needs! Main Features Specifications * State-of-the-art Ozone Generator for home aquariums. * 50 mg/hr variable output ozonizer. * Utilizes high frequency switching technology * Designed for use in a humid environment * No regular maintenance required * Interface with all Redox (ORP) controllers. * Includes 250cc Air Drier Units are just 1 1/4 lbs. and 6 5/8"L x 6 1/4"W x 2 1/4"H. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2530/red_sea_aquazone_50_mg_hr_ozonizer.html http://www.saltwatereddies.com/images/products/Red-Sea-AquaZone-50-mg.jpg http://www.saltwatereddies.com/content-product_info/product_id-2530/red_sea_aquazone_50_mg_hr_ozonizer.html Red Sea AquaZone 200 mg/hr ozonizer AquaZone 200 with 250cc Air Drier Applying ozone to your tank raises the ORP, increasing oxygen levels and decreasing dissolved wastes; ozone also effectively kills numerous harmful pathogens. AquaZone ozonizer`s corona discharge technology provides higher ozone concentration than UV bulb style ozonizers and allows variable ozone output. Just dial in the amount of ozone that your tank needs! * State-of-the-art Ozone Generator for home aquariums. * 200 mg/hr variable output ozonizer. * Utilizes high frequency switching technology * Designed for use in a humid environment * No regular maintenance required * Interface with all Redox (ORP) controllers. * Includes 250cc Air Drier Units are just 1 1/4 lbs. and 6 5/8"L x 6 1/4"W x 2 1/4"H. 1-year manufacturer`s warranty from date of purchase. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2532/red_sea_aquazone_200_mg_hr_ozonizer.html http://www.saltwatereddies.com/images/products/Red-Sea-AquaZone-200.jpg http://www.saltwatereddies.com/content-product_info/product_id-2532/red_sea_aquazone_200_mg_hr_ozonizer.html Red Sea AquaZone 100 mg/hr ozonizer Information Product Manuals & Documentation AquaZone 100100 mg/hr with 250cc Air Drier Applying ozone to your tank raises the ORP, increasing oxygen levels and decreasing dissolved wastes; ozone also effectively kills numerous harmful pathogens. AquaZone ozonizer`s corona discharge technology provides higher ozone concentration than UV bulb style ozonizers and allows variable ozone output. Just dial in the amount of ozone that your tank needs! * State-of-the-art Ozone Generator for home aquariums. * 100 mg/hr variable output ozonizer. * Utilizes high frequency switching technology * Designed for use in a humid environment * No regular maintenance required * Interface with all Redox (ORP) controllers. * Includes 250cc Air Drier California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2531/red_sea_aquazone_100_mg_hr_ozonizer.html http://www.saltwatereddies.com/images/products/Red-Sea-AquaZone-50-mg.jpg http://www.saltwatereddies.com/content-product_info/product_id-2531/red_sea_aquazone_100_mg_hr_ozonizer.html Ozotech IQ-20 powered air drier. 5 - 20 SCFH. Built in timer. For the drying of filtered air supply. Shipment Dimensions: * Weight: 35 lb * Height: 16 in * Width: 8 in * Depth: 6 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1442/ozotech_iq_20_powered_air_drier.html http://www.saltwatereddies.com/images/products/IQ20ozotech.jpg http://www.saltwatereddies.com/content-product_info/product_id-1442/ozotech_iq_20_powered_air_drier.html Connectivity * Ethernet Interface * Embedded Web Server * Only controller with web browser Monitoring, Control & Configuration. * Email Alarms Expandability * Most expandable Controller. Up to 240 modules, hundreds of probes, and thousands of controlled outlets. * Simple menu driven Configuration No program language knowledge required. Robust Timers * Simulates Sunrise/sunset * Simulates moon cycle * Wave Maker and Random timed cycles * Still water feed mode (multiple modes) Ultimate Control * Monitor/Control Temperature, pH * Digital Calibration on all probes * Seasonal temp & lighting control * Flexible Control Options Apex Lite System The Apex Lite System delivers a professional quality controller at hobbyist prices. Built-in Ethernet Integrated Ethernet port Most advanced web server available Interactive flash graphing application in the web server Interfaces with AquaNotes iPhone application Compatible with all Major web browsers (Internet Explorer, Firefox, and Safari)Only aquarium controller with web server monitoring, control, and configuration Compatible with wireless bridges or game adapters (802.11x) so that wireless network communication is possible Email or text message alarms Email alarms or audible alarms when Energy Bar power fails Interactive flash graphing application in the web server Interfaces with AquaNotes iPhone application RSS and XML Support Very simple menu driven configuration Menus to easily setup pumps, lights, heater, chiller, co2, etc No programming required for configuration Can name the outlets (unlike competing products) Can be configured through LCD Display or a standard web browser In advanced mode an enhanced AquaController programming language is available Sophisticated non standard control available Virtual Outlets allow even more complex control options Monitor/Control - pH, Temp The base unit includes software which is capable of monitoring pH, and temperature. The monitored data is continuously displayed on the large LCD display and also logged into the internal nonvolatile memory for later retrieval. All probes support digital calibration. Galvanic isolation on probes Galvanic isolation on the probes results much more reliable and accurate probe readings. While these features increase costs we feel that probe accuracy is absolutely critical for monitoring/controlling your tank, unlike many competing aquarium controllers. State of the Art Electronics Integration Only 32 bit processor on an Aquarium controller Over 16 times more code space & 5X faster than competitive controllers The huge code space means that future expandability is ensured Over 16 times data storage memory than the competition 1 years worth of data logs can be stored internally New Enhanced Control Functionality Day of Week functionality Sub minute control added on EnergyBar controlled devices Default outlet state for all EnergyBar outlets Second resolution control Sunrise and Sunset Simulation The Apex has a special control function which can be used to simulate the varying lengths of days throughout the year. This feature is used to make the length of daylight hours longer in the summer than in the winter. This results in a more realistic simulation of natural lighting variations. Moon Cycle Simulation The Apex has another special control function which can be used to simulate the moon cycle in your tank. The lunar simulator is used for this feature and is capable of varying the intensity of light emitted from its LEDs. The intensity variations are controlled by the Apex which is preprogrammed with correct intensity values for each day of the moon cycle. The Apex automatically updates the intensity value depending upon the current setting of the Apex's clock. With this artificial moon cycle, it is possible to induce corals and fish to spawn. WaveMaker Each pump to be controlled can either have a random or fixed time period. Both the on and off times are fully programmable and can range from 1 minute to 4 hours in 1 minute increments. Four independent variable length feed timer cycle scan be initiated with the press of a button and will disable some or all of the pumps in the system (programmed by the user). 6 Digital Inputs The Apex comes equipped with 6TTL level external inputs which can be used to activate/deactivate equipment in response to an external stimulus. Applications for these inputs include connection to water level float switches, water pressure and flow sensors, and water on the floor sensors. The Apex can be configured to signal alarms or turn on/off appliances in the event of external switch open or closure. Modular Expansion through AquaBus High reliability protocol with robust error correction Virtual unlimited expandability. The most expandable controller. Plug and Play AquaBus modules are automatically recognized and configured Cable lengths over 200 feet Expandable to 240 AquaBus modules Add optional modules to monitor Hundreds of Probes Add additional EnergyBars to control thousands of outlets All AquaBus modules allow for easy firmware updates Probe modules available (or in development) for additional Temperature, pH, ORP, Conductivity, and dissolved oxygen probes Module firmware updates done through AquaBus. No need to disassemble controller, and individually update modules Backward Compatibility All AquaController 3 accessories work with the AquaController Apex. One major design consideration was to maintain backwards compatibility to protect existing customers investment in AquaController compatible equipment. o I/O port expansion backwards compatible with PX 1000 o Compatible with the breakout box o Integrated control port - All control port accessories (DC8, DC4, DC4HD, AquaSurf, Lunar Sim) AquaBus Features Two AquaBus connectors for easy expansion, and flexible cabling options Plug and Plug bus allows for modular expansion. Updateable Firmware Firmware updates via Ethernet Flash memory so new features can be easily added All AquaBus modules allow for easy firmware updates No need to unplug/rewire devices to perform the firmware update (unlike the competition) Alternate power port on Apex Lite Base Unit In power failure situations Alarm emails can still be sent Can detect power failures in EnergyBars Internal rechargeable backup battery retains clock Graph probe/device data on the LCD display Compact Size 7.5" x 2.6" x 1.10" What's in the Box 1x Temperature Probe 1x Apex Lite Unit- pH port, I/O port, Ethernet port, Control port, 2x Aquabus ports 1x Apex Base Unit 1x Energy Bar 8 1x Ethernet Cable 1x USB Cable 1x Packet of mounting screws 1x Instruction Manual Manufacturer Info Neptune Systems Aquarium Supplies Neptune Systems is one of the worlds leading manufacturers of aquarium controllers. The company was founded in 1995 for the purpose of developing affordable water quality monitoring and control instrumentation. Their engineering team has extensive expertise in computer hardware and software system design as well as a background in water quality analysis. Neptune Systems uses these finely-honed engineering skills to develop innovative monitoring and control solutions for use in reef and fresh water aquariums, aquaculture tanks, hydroponics systems and general laboratory use. Neptune Systems is best known for their AquaController line. The company is known for their innovation and customer centric. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2529/neptune_systems_aquacontroller_apex_lite_system.html http://www.saltwatereddies.com/images/products/Apex-Lite-System.jpg http://www.saltwatereddies.com/content-product_info/product_id-2529/neptune_systems_aquacontroller_apex_lite_system.html Apex Jr Aquarium Controller w/ Display Module & Temp Probe Neptune Systems Apex Jr Aquarium Controller w/ Display Module & Temp Probe Product Includes: - Apex Jr Base Unit (The Brain) - Apex Display Module - Temperature Probe w/ 10-foot Cable - Ethernet Cable - 2x Built-In AquaBus Ports - Owners Manual Product Highlights: 1. Remote Monitoring & Control: Built-in web-serve allows the controller to be set-up, monitored and controlled remotely through a web browser or iPhone application. 2. All in One, Compact Design: Base unit includes 4 built-in, independently controllable outlets. Each outlet is rated up to 8 Amps with the maximum of 15 Amps for all 4 outlets combined. 3. Simple Set-up: Easy to use, menu-driven set-up for lights, pumps, heaters, chillers and other equipment. No programming required. 4. Easy Expansion: Add up to 4 AquaBus modules like an Energy Bar 8 or Probe Module in addition to 1 Display Module. Supports AquaBus cable lengths up to 200 feet. 5. Plug and Play: Automatically recognizes and configures AquaBus modules. 6. Increased Reliability & Accuracy: Galvanic isolation of the probes produces more reliable and accurate readings. 7. Wireless Capable: Add a wireless bridge or wireless game adapter (802.11x) to wireless communicate with the controller. 8. Easy Software Upgrades: Download updates and new features directly from the web. No need to disassemble the controller and individually update each AquaBus module. 9. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than other controllers. Capable of storing up to 1 year worth of data logs. 10. Stable Operating System: High reliability protocol with robust error correction. 11. Warranty: 1-Year Manufacturer's Limited Warranty. Controller Functionality: 1. Monitor & Control Temp: Monitor and control the aquarium water temperature. 2. Monitor & Control pH, ORP, Conductivity and/or Dissolved Oxygen: Monitor and control pH, ORP, Conductivity and/or Dissolved Oxygen with the addition of a Probe Module (PM) and matching probe. 3. Sunrise and Sunset Simulation: Automatically turn the aquarium lights on and off to simulate sunrise and sunset. Can also vary the length of the day throughout the year to make the daylight hours longer in the summer and shorter in the winter. 4. Moon Cycle Simulation: Mimic the actual lunar cycle by varying the intensity of the moon lights with the addition of an optional Lunar Simulator. Evidence shows that simulating the lunar cycle may help induce corals and fish to spawn. 5. Wavemaker & Other Timed Cycles: Control up to 20 pumps or other devices at the same time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Each device can also be programmed to run on specific, user defined day(s) of the week. 6. Feed Mode: With a touch of a button, a set of user defined pumps can be disabled to allow feeding. 7. System Alarm: Send an email or text alert when a monitored condition exceeds a preset value. 8. Power Failure Alarm & Power Back-Up: Send an email alert or sound an audible alarm when the power fails. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2507/apex_jr_aquarium_controller_w_display_module_temp_probe.html http://www.saltwatereddies.com/images/products/apex_jr_package.jpg http://www.saltwatereddies.com/content-product_info/product_id-2507/apex_jr_aquarium_controller_w_display_module_temp_probe.html Digital Aquatics ReefKeeper Elite (Net) Controller Digital Aquatics Rk Elite (Complete System W/Net) The ReefKeeper Elite is true to its name, standing alone in the industry as the most innovative aquarium controller on the market. With the most intuitive interface and easy to use system controls, you'll find it will simplify all aspects of your aquarium system that it controls. There's also no need to find a power outlet near the head unit as there's no power cord needed; power is provided right from the bus. The compact and convenient design, multiple mounting options and great looks makes the ReefKeeper Elite right for almost any installation; and without any unsightly probe wires dangling about, the head unit will add a touch of class to any tank! The ReefKeeper is the most expandable controller we know of, allowing the control of over 250 outlets. It has the capability of reading more probes and input devices than even the most demanding system will ever need. All this makes the RKE suitable for tanks from 1 to 10,000 gallons and beyond. One of the biggest advantages of the RKE system is what it comes with! Other controllers leave you wanting and having to purchase add-ons just to get them to a usable level. The RKE system includes two PC4s; that's 8 outlets to control! You also get an SL1 that will allow you to monitor pH, ORP, temperature and two switches; not to mention a free temperature probe and pH probe. All this for hundreds of dollars less than other controllers that barely give you enough to get started. Includes: 1 x ReefKeeper Elite Head Unit (GC1) 2 x RKM-PC4 (total of 8 outlets) 1 x RKM-SL1 (Inputs: pH, ORP, Temperature, 2 x Switch Ports) 1 x RKM-NET 1 x Temperature probe 1 x Digital Aquatics pH probe Tech Specs: Display: 128x64 Graphical w/RGB backlight Backlight Colors: 30 Max Expansion: 63 Modules Ethernet: Requires Optional RKM-NET module Interface: 11 Button CapSense Audible Feedback: Yes Battery Backup: Yes Data Logging: Yes Data Graphing: Yes Key Lock: Yes Wavemaker: Yes Sure-on Feature: Yes Headunit Dimensions: 3.45" x 4.45" x 0.80" California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2523/digital_aquatics_reefkeeper_elite_net_controller.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-ReefKeeper-Elite-(Net).jpg http://www.saltwatereddies.com/content-product_info/product_id-2523/digital_aquatics_reefkeeper_elite_net_controller.html Digital Aquatics ReefKeeper Elite (Plus) Controller Information With systems starting under $150 ReefKeeper control systems can handle tanks from 10-10000 gallons! Flexibility, expandability, style and function make Digital Aquatics controller a great addition to any tank! The ReefKeeper Elite is true to its name, standing alone in the industry as the most innovative aquarium controller on the market. With the most intuitive interface and easy use system controls, you`ll find it will simplify all aspects of your aquarium system that it controls. There`s also no need to find a power outlet near the head unit as there`s no power cord needed; power is provided right from the bus. The compact and convenient design, multiple mounting options and great looks makes the ReefKeeper Elite right for almost any installation; and without any unsightly probe wires dangling about, the head unit will add a touch of class to any tank! The ReefKeeper is the most expandable controller we know of, allowing the control of over 160 outlets. It has the capability of reading more probes and input devices than even the most demanding system will ever need. All this makes the RK Elite suitable for tanks from 1 to 10000 gallons and beyond. One of the biggest advantages of the RK Elite system is what it comes with! With other controllers you`re left wanting and having to purchase add-ons just to get them to a usable level. The RK Elite system includes two PC4s; that`s 8 outlets to control! You also get an SL1 that will allow you to monitor pH, ORP, temperature and two micro switches. Not to mention a free temperature probe and pH probe. All this for hundreds of dollars less than other controllers that barely give you enough to get started. System includes: 1 x ReefKeeper Elite Head Unit 1 x RKM-SL1 (pH, ORP, temperature, 2 micro switches) 2 x RKM-PC4 (total of 8 outlets) 1 x Programming Dongle 1 x pH Probe Kit 1 x Temperature Probe Ethernet Capable Because the ReefKeeper Elite is a modular system we have the ability to develop new features as time goes on. One feature that we`ve been defining is an Ethernet module that will allow users to take advantage of their home networks and the World Wide Web. Digital Aquatics is dedicated to producing quality products at great prices! This module is still under development and we`re working on every aspect of it to reduce cost to you and NOT compromise safety and functionality. More to come on this optional module. Wireless Communication While a USB connection for your ReefKeeper Elite is needed for updates to firmware, nobody wants an unsightly wire running from their ReefKeeper to their PC. This will offer a Zigbee like wireless network experience. While we`re not ready to release all the details, our wireless module will give you freedoms and abilities that other systems just can`t offer. More to come on this optional module. Upgradeability The RK Elite also has upgradeable firmware so your controller can grow with your system; and firmware updates are always free! NEW - Advanced 11 button CapSense interface By expanding from the traditional 3 button interfaces of the past we have given the user a more intuitive interface to navigate with. The RK Elite menu, programming, and viewing systems take full advantage of the new interface providing an all around easier experience. NEW - 128 x 64 Graphical display (w/RGB backlight and 30 background colors) The RK Elite utilizes a graphical display that allows us to display status icons, data graphs, and a variety of information in a way that has not been possible before. NEW - More then 250 Programmable Channels One of the highlights of the RK Elite system is its ability to control over 250 outlets. While most people will never need that many outlets, some will. Our goal is to be forward thinking and give your new system the freedom to grow. Multiple Mounting Options Like the RK1 and RK2 the RK Elite provides for multiple mounting options like flush mount and surface mount. While other controllers are big and awkward to mount needing unstable Velcro or unsightly restraints the RKE will add a touch of class to your system. Let face it, we all work hard to keep our tanks looking good and the RKE will be a great addition! NEW - Home Screen (w/easy to read icons and data) The new Home Screen provides you with quick information that is well laid out and easy to read. Icons provide you the current state of your system while you can quickly scroll through all the data for your tank with the touch of a button. Keeping tabs on your tank has never been easier! Simple menu system for easy configuration We`ve worked hard to try and make the interface as simple and intuitive as possible for the RK Elite. With the advantage of the new interface we`re able to really produce a one of a kind experience. Night Mode - Independently Programmable Our Night Mode feature allows the RK Elite to change depending on the time of day. In Night Mode the RK Elite can activate your Moon Light Controller, dim your display, transitioning your tank into a calm state. NEW - 64 Alarms With 64 alarms and an audible and visual alert you`ll know when any of your critical system parameters are out of range. NEW - Data Logging The RK Elite has onboard data logging for up to 32 probes/device with over 1000 data points each. NEW - Data Graphing With our new graphical head unit comes the ability to really display historic data the right way. Our dynamic graphing will help you track the performance of your system over time allowing you to quickly see when and where things are happening. Metal Halide control with "Sure-On" Just like the RK1 and RK2 the RK Elite system will make sure your Metal Halide bulbs come back on after a power interruption. Sure-On is a 15 minute delay that gives these expensive and sensitive bulbs time to cool which insures safe, continuing usage over time. NEW - Light Timer with Weekday/Weekend schedules and safety temp cut off New to the light timer is the ability to set different lighting modes for weekdays and weekends. This gives you the option of setting a lighting cycle that caters to your viewing schedule as it changes throughout the week. You still have our safety cut off temp that will shut your lights down if your tank gets above some set point. Moon Light Controller (optional) With the optional MLC the RK Elite system can simulate a true lunar cycle. Read more on the RKM-MLC in that section. NEW - Multi-timer function The multi-timer is all new. You`re now able to stack up to four unique timers to create any on/off cycles you would like. This is great for dosing and other scheduled tasks that don`t happen on a regular interval or for creating your own special cycle based on your needs. NEW - 64 Dedicated Timers Ther are 64 advanced timers you can program, and with the Multi-timer you can mix and match them in any fashion you`d like to get even more complexed function. NEW - 2 Standby/Feed/Service modes The RK Elite also sports two user settable standby functions. This gives you the flexibility to configure multiple service modes for activities like feeding, water changes, and other maintenance. Control Functions The new "Controller" function can take any probe input and act on it with a user settable hysteresis. This includes pH, ORP, temperature and micro switches just for starters. You can also take action based on current draw or load on any PC4 and you`ll be able use any future probes that are added to the system! Sumps/Skimmers pump control You can program the sump pump and skimmer pump functions to be off in standby and even have a standby delay just to make sure your system doesn`t overflow or over skim food after a feeding. Wavemaker A/B and C/D pump control We`ve expanded our old wavemaker control to include a "D" mode. Now you can set up multiple pairs of power heads to get all the turbulent flow you need! NEW - Top-off pump control Use this setting to control a pump based on a micro switch for top-off and many other features. NEW - Key Lock Lock out unwanted and accidental usage of your RK Elite. With a simple lock, you can make sure the kids, your friends or anyone else doesn`t mess with your controller. Battery Backup The battery in the RK Elite is user serviceable. If it ever goes dead it can be replaced without the need for service. NEW - Audible Feedback Also new to the RK Elite is audible feedback. You can turn this feature on or off depending on your preference. Splash-proof Faceplate Wet fingers aren`t a problem with our full covering face plate. Upgradeable Firmware Like the RK2 before it the RK Elite has upgradeable firmware. This will help you maintain your investment over time and allow you it grow as we release more and more expandability! California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2317/digital_aquatics_reefkeeper_elite_plus_controller.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-ReefKeeper-Elite-(Plus)-Controller-99.jpg http://www.saltwatereddies.com/content-product_info/product_id-2317/digital_aquatics_reefkeeper_elite_plus_controller.html Digital Aquatics ReefKeeper Lite (Net) Controller Digital Aquatics ReefKeeper Lite (Net) Controller Information Affordable Flexability The ReefKeeper Lite is a powerful and cost effective aquarium control system. Its completely flexible and allows you the ability to create a control system thats as unique as your tank. Whether youre looking for a variety of programmable outlets or need to monitor multiple parameters, the ReefKeeper Lite can be configured to your specifications. Our easiest programming yet... The ReefKeeper Lite uses our new EasyFlow menu structure which makes for quick setup of the entire system. Theres no complicated or frustrating computer language to learn with the ReefKeeper. We walk you through the setup step by step making sure you dont forget a critical setting. This helps ensure that the system operates as you expect it to. Weve also added the new ReadyFit functions for programming channels. These functions are preconfigured with some of the more common settings and require little or no input from the user to function. pH Control With the ability to monitor multiple pH probes you can run a reactor as well as monitor the pH of your main system. Temperature Control Control dual stage heating and cooling with heaters, chillers and fans with different set points. Everything you need to hold your temperature rock solid. ORP Control Whether youre dosing ozone or just want to keep an eye on ORP the ReefKeeper has you covered. Salinity Control Use this probe to make sure your water changes are spot on. Consistent salt levels between mix water and system water is critical to the heath of your system. Auto Top-off When paired with one or more float switches you can set the system up to add RO water in as small or big amounts as needed. This level of control helps reduce fluctuations in salt levels as well as temperature and other important parameters. Wavemakers With four unique programmable setting the ReefKeeper Elites wavemaker setting can setup opposing pump cycles to simulate turbulent flow in your tank. Included: * 1 x RKL Head Unit * 2 x PC4 - Power Controller 4 * 1 x SL1 - System Lab 1 * 1 x NET - NET Interface Module * 1 x DA iTemp Temperature Probe * 1 x DA pH Probe * 1 x 7 pH Cal Solution * 1 x 10 pH Cal Solution * 1 x SID - System Interface Device * 1 x 6' Bus Cable * 1 x 3' Bus Cable * 1 x 1' Bus Cable * 1 x Programming Coupler * 1 x 7' CAT5 Ethernet Cable * 10x Mounting Screws Manufacturer Info Digital Aquatics Aquarium Supplies Digital Aquatics was founded in 2004 and has quickly become the most recognized name in aquarium automation. Since the company debuted the original ReefKeeper 1 (now known as the RK1) in 2004, they have gone on to create some of the most flexible, innovative and cost effective aquarium controllers on the market. The revolutionary ReefKeeper Elite (RKE) was unveiled in 2008 and the affordable ReefKeeper Lite (RKL) came out shortly thereafter to appeal to more budget-conscience aquarium hobbyists. In 2010, Digital Aquatics released a reptile version, the HerpKeeper, as well as the aptly named PondKeeper. ReefKeeper controllers simplify aquarium keeping duties by monitoring and controlling a variety of water parameters and equipment including but not limited to lighting, water flow, heating, cooling, pH and ORP. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2526/digital_aquatics_reefkeeper_lite_net_controller.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-ReefKeeper-Lite-(Net).jpg http://www.saltwatereddies.com/content-product_info/product_id-2526/digital_aquatics_reefkeeper_lite_net_controller.html Digital Aquatics RKM SL-1 Module Information Multiple Inputs The RKM-SL1s five input ports provide a broad range of monitoring options for all the most common probes. * 1 x pH port: The pH port is a standard BNC connection. While any standard probe should work, we suggest using Digital Aquatics brand probes as they have been tested and are trusted to work with our modules. * 1 x ORP port: The ORP port is a standard BNC connection. While any standard probe should work, we suggest using Digital Aquatics brand probes as they have been tested and are trusted to work with our modules. * 1 x Temperature port: Digital Aquatics Temperature Probe * 2 x Switch ports: Great for float switches and leak detectors. This port gives customers the ability easily integrate ATO systems and other automated tasks. No compromise Design Small, compact design and convenient mounting tabs make installing the SL1 a breeze. Upgradeability The SL1 also has upgradeable firmware so you can take advantage of our developing feature set; and firmware updates are always free! Product Specs * LED Status Indicator Connections * Temperature Port * pH Port * Two Switch Ports * ORP Port * Two Bus Connections Physical Details * Physical Dimensions: 1.0" x 2.25" x 4.30" Package Contents * One RKM-SL1 Unit * One 6' Bus Cable * Two Mounting Screws Compatibility * ReefKeeper Elite - Supported * ReefKeeper Lite - Supported * ReefKeeper 1 - Not Supported * ReefKeeper 2 - Not Supported Manufacturer Info Digital Aquatics Aquarium Supplies Digital Aquatics was founded in 2004 and has quickly become the most recognized name in aquarium automation. Since the company debuted the original ReefKeeper 1 (now known as the RK1) in 2004, they have gone on to create some of the most flexible, innovative and cost effective aquarium controllers on the market. The revolutionary ReefKeeper Elite (RKE) was unveiled in 2008 and the affordable ReefKeeper Lite (RKL) came out shortly thereafter to appeal to more budget-conscience aquarium hobbyists. In 2010, Digital Aquatics released a reptile version, the HerpKeeper, as well as the aptly named PondKeeper. ReefKeeper controllers simplify aquarium keeping duties by monitoring and controlling a variety of water parameters and equipment including but not limited to lighting, water flow, heating, cooling, pH and ORP. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2527/digital_aquatics_rkm_sl_1_module.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-RKM-SL-1-Module-1.jpg http://www.saltwatereddies.com/content-product_info/product_id-2527/digital_aquatics_rkm_sl_1_module.html Digital Aquatics ReefKeeper Lite (Plus) Controller ReefKeeper Lite Level 3 ReefKeeper Lite Preliminary Product Information * Expandable - up to 4 modules (PC4s, SL1s or MLC) * pH, ORP, and switch inputs (w/ optional SL1) * 16 timers / 16 alarms * Audible / Visual alarms * Wavemaker * Dual Stage Temperature Controller * Moonlight Controller (w/optional MLC) * Light Controller * Pump Controller ReefKeeper Lite - Level 3 Includes: * 1 x Head unit (GC2) * 2 x PC4 (total of 8 outlets) * 1 x SL1 (pH, ORP, temp, 2 x switch inputs) * 1 x Temp Probe * 1 x pH Probe Kit California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2525/digital_aquatics_reefkeeper_lite_plus_controller.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-ReefKeeper-Lite-(Plus).jpg http://www.saltwatereddies.com/content-product_info/product_id-2525/digital_aquatics_reefkeeper_lite_plus_controller.html Digital Aquatics ReefKeeper Lite (Basic) Controller ReefKeeper Lite Level 1 ReefKeeper Lite Preliminary Product Information * Expandable - up to 4 modules (PC4s, SL1s or MLC) * pH, ORP, and switch inputs (w/ optional SL1) * 16 timers / 16 alarms * Audible / Visual alarms * Wavemaker * Dual Stage Temperature Controller * Moonlight Controller (w/optional MLC) * Light Controller * Pump Controller ReefKeeper Lite - Level 1 Includes: * 1 x Head unit (GC2) * 1 x PC4 (4 outlets) * 1 x Temp Probe California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2524/digital_aquatics_reefkeeper_lite_basic_controller.html http://www.saltwatereddies.com/images/products/Digital-Aquatics-ReefKeeper-Lite-Controller.jpg http://www.saltwatereddies.com/content-product_info/product_id-2524/digital_aquatics_reefkeeper_lite_basic_controller.html No longer available AquaController Jr. Backlit unit with temperature probe, standard grade ph probe, serial interface, and eight outlet direct connect power center. The AquaController Jr base unit delivers the highest price performance ratio in the industry and brings truely affordable aquarium monitoring and control to fish tanks of all sizes. The AquaController Jr has the same great programming configuration language of our higher end controllers as well as the temperature and pH monitoring and control, lighting and pump/powerhead control. The Jr is now available with an optional serial port so that it can be connected to your PC. With AquaNotes Lite, our free Windows software permanent records and graphs of the datalogs are possible. In addition the AquaController Jr is able to: Monitor: pH, and Temperature - Control: pH, and Temperature - Optional Computer Serial Interface - works With AquaNotes NOW! - 1 Optional External Switch Input - Timers - Simulate Sunrise/Sunset - Simulate a Moon Cycle - Control Powerheads/Pumps (Wavemaker) - Hardwired or X10 Control Options - Programming Language - Alarms - Perform Datalogging - Flash Memory for easy Firmware Upgrades - LCD Display - Display Lock with password protection - Battery Backed Real Time Clock - The AquaController Jr has an easy to use and intuitive three button user interface. The buttons are used to navigate through the menus and to modify the standard setup. All setup and program modifications are possible through the buttons on the AquaController Jr - no external computer is required. The base unit includes a comprehensive owner's manual, which contains instructions and examples on how to best utilize your AquaController Jr. No technical background is necessary to setup and operate the controller. The base unit measures 2.75' x 4.60' x 1.00'. To help you perform the initial setup of the AquaController Jr, the base unit comes pre-programmed with a default setup which requires little if any modification to work with most aquarium setups. No longer available Shipment Dimensions: * Weight: 30 lb * Height: 10 in * Width: 6 in * Depth: 6 in California Sales Tax Notice:CA orders Only please add 8.75% State Tax California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice. http://www.saltwatereddies.com/content-product_info/product_id-1563/aquacontroller_jr_w_dc8_serial_port_std_ph.html http://www.saltwatereddies.com/images/products/Aquacontroller Jr.jpg http://www.saltwatereddies.com/content-product_info/product_id-1563/aquacontroller_jr_w_dc8_serial_port_std_ph.html Apex Base Unit complete w/ Temperature Probe w/ 10' cable and Ethernet cable. Warranty: 1-Year Manufacturer's Limited Warranty. Built-In Controller Functionality: 1. Monitor & Control pH, Temp, and ORP: Capable of monitoring and controlling pH, temperature and ORP. Instead of monitoring ORP the unit may also be used to monitor and control 2 different pH sources at the same time. 2. Sunrise and Sunset Simulation: Capable of varying the length of the day throughout the year to produce a more realistic simulation of natural lighting conditions. Used to make the length of daylight hours longer in the summer than in the winter. 3. Moon Cycle Simulation: In conjunction with a Lunar Simulator is capable of varying the intensity of light emitted from the LED's to produce a more realistic simulation of the actual lunar cycle. With this artificial moon cycle simulation it may be possible to induce corals and fish to spawn. 4. Wavemaker & Other Timed Cycles: Capable of controlling up to 20 pumps or other devices over a random or fixed period of time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Day of Week functionality allows devices to run on specific, user defined days of the week. 5. Feed Mode: A variable length feed timer capable of disabling a set of user defined pumps for a set period of time. 6. Six Digital Inputs: Equipped with 6 TTL level external inputs which can activate/deactivate equipment in response to an external stimulus. Applications include connection to water level float switches, water pressure and flow sensors and water on the floor sensors. 7. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. 8. Light Dimming Control: Dim ballasts with 0 to 10V interfaces like some T5 ballasts. 9. Fail-safe Control: During communication failures Energy Bar 8 outlets revert to user defined settings. 10 System Alarm: Email or text message alert when a monitored condition exceeds a preset value. 11. Power Failure Alarm & Power Back-Up: Email or audible alarms when the power for the Energy Bar 8 fails. Alternate AC port allows base unit to be plugged into a UPS (uninterrupted power supply) to keep it running and accessible even during a complete power outage. Features: 1. Expandable: Built-in, 2 Port AquaBus hub allows the easy addition of other AquaBus accessories. Up to 240 AquaBus modules can be connected together to control more than 1000 independent outlets and monitor more than 100 different probes or digital inputs. Supports AquaBus cable lengths up to 200+ ft. 2. Plug and Play: Automatically recognizes and configures other AquaBus modules like an Energy Bar 8. 3. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than competitive controllers. Capable of storing 1 year's worth of data logs internally. 4. Easy Software Upgrades: Download updates and new features from the web and upgrade entire system directly through AquaBus links. There is no need to disassemble the controller and individually update each AquaBus module. 5. Stable Operating System: High reliability protocol with robust error correction. 6. Increased Reliability & Accuracy: Galvanic isolation on the probes results in much more reliable and accurate probe readings. 7. Backward Compatibility: All AquaController 3 accessories work with the AquaController Apex including the PX 1000 Expansion Module, I/O breakout box, DC8, DC4, DC4HD, AquaSurf and all Lunar Simulators. 8. Enhanced Precision: Sub minute control on all Energy Bar 8 controlled devices. Set-Up: 1. Easy To Interface: Quick, intuitive and flexible menu navigation for simple set-up of pumps, lights, heaters, chiller, CO2, etc. 2. Easy To Use Technology: No programming required for configuration and unlike other products the ability to assign unique names to each of the outlets. 3. Multiple Set-Up Options: Can be configured through Apex Display Module or a standard web browser. 4. Enhance Programming Language: Allows for sophisticated, non-standard control including virtual outlets that provide even more complex control options. Connectivity: 1. Embedded Web Server: Monitor, control and configure controller from the web. Compatible with Internet Explorer, Firefox and Safari. 2. Ethernet Interface: Built-in Ethernet port. 3. Wireless Compatible: With the addition of a wireless bridge or game adapter (802.11x) wireless communication is possible. 4. Real Time Data Graphing: Interactive flash graphing application built into the web server. 5. iPhone Compatible: Interfaces with AquaNotes iPhone application. 6. RSS and XML Support. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2379/apex_base_unit_w_temp_probe.html http://www.saltwatereddies.com/images/products/apex_base_unit.jpg http://www.saltwatereddies.com/content-product_info/product_id-2379/apex_base_unit_w_temp_probe.html Manufacturer: Neptune Systems Dimensions: Base Unit: 7.5" x 2.6" x 1.1"; Display Module: 3.4" x 4.1" x 0.7"; EB8: 10.0" x 3.8" x 1.8" (L x W x H) Availability: In Stock - Usually ships in 24 hours Item #: NEP6005 Package Includes: - Apex Base Unit - Temperature Probe w/ 10' Cable - Apex Display Module w/ 10' AquaBus Cable - Energy Bar 8 Module - 6' AquaBus Cable - Ethernet Cable - Lab Grade pH probe - pH 7.0 and 10.0 Calibration Fluid (2/ea) - Owner's Manual Built-In Controller Functionality: 1. Monitor & Control pH, Temp, and ORP: Capable of monitoring and controlling pH, temperature and ORP. Instead of monitoring ORP the unit may also be used to monitor and control 2 different pH sources at the same time. 2. Sunrise and Sunset Simulation: Capable of varying the length of the day throughout the year to produce a more realistic simulation of natural lighting conditions. Used to make the length of daylight hours longer in the summer than in the winter. 3. Moon Cycle Simulation: In conjunction with a Lunar Simulator is capable of varying the intensity of light emitted from the LED's to produce a more realistic simulation of the actual lunar cycle. With this artificial moon cycle simulation it may be possible to induce corals and fish to spawn. 4. Wavemaker & Other Timed Cycles: Capable of controlling up to 20 pumps or other devices over a random or fixed period of time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Day of Week functionality allows devices to run on specific, user defined days of the week. 5. Feed Mode: A variable length feed timer capable of disabling a set of user defined pumps for a set period of time. 6. Six Digital Inputs: Equipped with 6 TTL level external inputs which can activate/deactivate equipment in response to an external stimulus. Applications include connection to water level float switches, water pressure and flow sensors and water on the floor sensors. 7. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. 8. Light Dimming Control: Dim ballasts with 0 to 10V interfaces like some T5 ballasts. 9. Fail-safe Control: During communication failures Energy Bar 8 outlets revert to user defined settings. 10 System Alarm: Email or text message alert when a monitored condition exceeds a preset value. 11. Power Failure Alarm & Power Back-Up: Email or audible alarms when the power for the Energy Bar 8 fails. Alternate AC port allows base unit to be plugged into a UPS (uninterrupted power supply) to keep it running and accessible even during a complete power outage. Features: 1. Expandable: Built-in, 2 Port AquaBus hub allows the easy addition of other AquaBus accessories. Up to 240 AquaBus modules can be connected together to control more than 1000 independent outlets and monitor more than 100 different probes or digital inputs. Supports AquaBus cable lengths up to 200+ ft. 2. Plug and Play: Automatically recognizes and configures other AquaBus modules like an Energy Bar 8. 3. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than competitive controllers. Capable of storing 1 year's worth of data logs internally. 4. Easy Software Upgrades: Download updates and new features from the web and upgrade entire system directly through AquaBus links. There is no need to disassemble the controller and individually update each AquaBus module. 5. Stable Operating System: High reliability protocol with robust error correction. 6. Increased Reliability & Accuracy: Galvanic isolation on the probes results in much more reliable and accurate probe readings. 7. Backward Compatibility: All AquaController 3 accessories work with the AquaController Apex including the PX 1000 Expansion Module, I/O breakout box, DC8, DC4, DC4HD, AquaSurf and all Lunar Simulators. 8. Enhanced Precision: Sub minute control on all Energy Bar 8 controlled devices. Set-Up: 1. Easy To Interface: Quick, intuitive and flexible menu navigation for simple set-up of pumps, lights, heaters, chiller, CO2, etc. 2. Easy To Use Technology: No programming required for configuration and unlike other products the ability to assign unique names to each of the outlets. 3. Multiple Set-Up Options: Can be configured through Apex Display Module or a standard web browser. 4. Enhance Programming Language: Allows for sophisticated, non-standard control including virtual outlets that provide even more complex control options. Connectivity: 1. Embedded Web Server: Monitor, control and configure controller from the web. Compatible with Internet Explorer, Firefox and Safari. 2. Ethernet Interface: Built-in Ethernet port. 3. Wireless Compatible: With the addition of a wireless bridge or game adapter (802.11x) wireless communication is possible. 4. Real Time Data Graphing: Interactive flash graphing application built into the web server. 5. iPhone Compatible: Interfaces with AquaNotes iPhone application. 6. RSS and XML Support. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2316/apex_w_display_module_lab_ph_temp_probe_eb8.html http://www.saltwatereddies.com/images/products/apex_package.jpg http://www.saltwatereddies.com/content-product_info/product_id-2316/apex_w_display_module_lab_ph_temp_probe_eb8.html Wireless Expansion Module for EcoTech Marine VorTech Pumps (WXM) # Neptune Systems Wireless Expansion Module for EcoTech Marine VorTech Pumps (WXM) Product Includes: - Wireless Expansion Module for EcoTech Marine VorTech Pumps (WXM) - 3-foot AquaBus Cable - 2 x Built-In AquaBus Ports - LED Status Indicator Light - LED Wireless Status Indicator Light - Owner's Manual Product Highlights: 1. Wireless Control: Wirelessly control up to 11 EcoTech Marine VorTech pumps. Compatible EcoTech pumps must have a wireless controller such as the Wireless EcoSmart Driver or the original Wireless Wave Driver. 2. Supported Wave Modes: Supports Reef Crest Random Mode, Lagoon Random Mode, Constant Speed Mode, Synch/Anti-Synch Mode, Short Pulse Mode, Long Pulse Mode, EcoSmart Nutrient Transport Mode (Only supported with EcoSmart Driver) and EcoSmart Tidal Swell Mode (Only supported with EcoSmart Driver). The Wave Modes can be varied throughout the day to accommodate different tank needs. 3. Plug and Play: Automatically recognized by the controller when installed. 4. Flexible Expansion: Built-In AquaBus ports allow for flexible and easy expansion. 5. Easy Software Upgrades: Download updates and new features directly from the web. 6. Compatibility: Can be with used with Apex, Apex Lite and Apex Jr aquarium controllers. 7. Warranty: 1-Year Manufacturer's Limited Warranty. # Manufacturer: Neptune Systems # Dimensions: 5.1" x 2.5" x 1.1" (L x W x H) # Availability: In Stock - Usually ships in 24 hours # Item #: NEP0151 California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2520/wireless_expansion_module_for_ecotech_marine_vortechs_wxm.html http://www.saltwatereddies.com/images/products/wxm_module.jpg http://www.saltwatereddies.com/content-product_info/product_id-2520/wireless_expansion_module_for_ecotech_marine_vortechs_wxm.html Variable Speed Dimming Module (VDM): Neptune Systems Variable Speed Dimming Module (VDM) Product Includes: - Variable Speed Dimming Module (VDM) - 3-foot AquaBus Cable - 2 x Built-In AquaBus Ports - 4 x Built-In Variable Speed Ports - 1 x Built-In AquaIllumination Serial Port - LED Status Indicator Light - Owners Manual Product Highlights: 1. Control AquaIllumination LED Light Systems: Simulate Sunrise-Sunset, Lunar Cycle, Cloud Cover and Lighting Storms and independently control the white and blue LEDs. (Interface cable sold separately.) 2. Dimmable Light Control: Variable speed, 0-10 Volt ports can be used to control dimmable lighting equipment such as dimmable T5s and LEDs. (Interface cable sold separately.) 3. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. (Interface cable sold separately.) 4. Plug and Play: Automatically recognized by the controller when installed. 5. Flexible Expansion: Built-In AquaBus ports allow for flexible and easy expansion. 6. Easy Software Upgrades: Download updates and new features directly from the web. 7. Compatibility: Can be with used with Apex, Apex Lite and Apex Jr aquarium controllers. 8. Warranty: 1-Year Manufacturer's Limited Warranty. # Manufacturer: Neptune Systems # Dimensions: 5.1" x 2.5" x 1.1" (L x W x H) # Item #: NEP0153 California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2519/variable_speed_dimming_module_vdm.html http://www.saltwatereddies.com/images/products/vdm_module.jpg http://www.saltwatereddies.com/content-product_info/product_id-2519/variable_speed_dimming_module_vdm.html Standard grade ORP probe with 10' coax cable, platinum band electrode and standard BNC connector. Precision: +/- 1 mV. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2515/standard_grade_orp_probe.html http://www.saltwatereddies.com/images/products/ORP_probe.jpg http://www.saltwatereddies.com/content-product_info/product_id-2515/standard_grade_orp_probe.html Standard grade pH probe with 10' coax cable, sealed Ag/AgCl reference and standard BNC connector. Precision: +/- .01 units. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2513/standard_grade_ph_probe.html http://www.saltwatereddies.com/images/products/Lab-pH.jpg http://www.saltwatereddies.com/content-product_info/product_id-2513/standard_grade_ph_probe.html Probe Module 2 for Conductivity (Salinity) & Temperature (PM2) Neptune Systems Probe Module 2 for Conductivity (Salinity) & Temperature (PM2) Product Includes: - Probe Module 2 for Conductivity (Salinity) & Temperature (PM2) - 3-foot AquaBus Cable - 2 x Built-In AquaBus Ports - LED Status Indicator Light - Owners Manual Product Highlights: 1. Monitor & Control Conductivity (Salinity) & Temperature: Monitor and control conductivity (salinity) and temperature of the aquarium water. Capable of measuring conductivity (salinity) from 0-50 ppt, 0-900 uS/cm, 0-9.0 mS/cm or 0-90.0 mS/cm. The average salinity of ocean water is approximately 35 ppt. 2. Digital Inputs:Equipped with 6 digital inputs which can be used with float switches, water pressure sensors, water flow sensors, water on the floor sensors and other equipment. Each digital input can be used to activate or deactivate equipment. For example, a top-off pump can be turned on if the water level in the aquarium or sump falls below a certain level. 3. Increased Reliability & Accuracy: Galvanic isolation of the probes produces more reliable and accurate readings. 4. Plug and Play: Automatically recognized by the controller when installed. 5. Flexible Expansion: Built-In AquaBus ports allow for flexible and easy expansion. 6. Easy Software Upgrades: Download updates and new features directly from the web. 7. Compatibility: Can be with used with Apex, Apex Lite and Apex Jr aquarium controllers. 8. Warranty: 1-Year Manufacturer's Limited Warranty. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2510/probe_module_2_for_conductivity_salinity_temperature_pm2.html http://www.saltwatereddies.com/images/products/pm2_module.jpg http://www.saltwatereddies.com/content-product_info/product_id-2510/probe_module_2_for_conductivity_salinity_temperature_pm2.html Probe Module 1 for pH or ORP & Temperature (PM1) Neptune Systems Probe Module 1 for pH or ORP & Temperature (PM1) Product Includes: - Probe Module 1 for pH or ORP & Temperature (PM1) - 3-foot AquaBus Cable - 2 x Built-In AquaBus Ports - LED Status Indicator Light - Owners Manual Product Highlights: 1. Monitor & Control pH or ORP & Temperature: Monitor and control pH or ORP and temperature of the aquarium water. 2. Digital Inputs:Equipped with 6 digital inputs which can be used with float switches, water pressure sensors, water flow sensors, water on the floor sensors and other equipment. Each digital input can be used to activate or deactivate equipment. For example, a top-off pump can be turned on if the water level in the aquarium or sump falls below a certain level. 3. Increased Reliability & Accuracy: Galvanic isolation of the probes produces more reliable and accurate readings. 4. Plug and Play: Automatically recognized by the controller when installed. 5. Flexible Expansion: Built-In AquaBus ports allow for flexible and easy expansion. 6. Easy Software Upgrades: Download updates and new features directly from the web. 7. Compatibility: Can be with used with Apex, Apex Lite and Apex Jr aquarium controllers. 8. Warranty: 1-Year Manufacturer's Limited Warranty. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2509/probe_module_1_for_ph_or_orp_temperature_pm1.html http://www.saltwatereddies.com/images/products/pm1_module.jpg http://www.saltwatereddies.com/content-product_info/product_id-2509/probe_module_1_for_ph_or_orp_temperature_pm1.html Lab grade pH probe with 10' coax cable, sealed Ag/AgCl reference and standard BNC connector. Epoxy sealed to handle pressure and increase average useful lifespan. Precision: +/- .01 units. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2512/lab_grade_ph_probe.html http://www.saltwatereddies.com/images/products/Lab-pH.jpg http://www.saltwatereddies.com/content-product_info/product_id-2512/lab_grade_ph_probe.html Lab grade Oxyguard Dissolved Oxygen Probe with 10' cable and Minidin 4 connector. Dual Range: 0 to 999 us/cm or 0 to 99.9 ms/cm. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2517/lab_grade_oxyguard_dissolved_oxygen_probe.html http://www.saltwatereddies.com/images/products/Disolved_oxygen-probe.jpg http://www.saltwatereddies.com/content-product_info/product_id-2517/lab_grade_oxyguard_dissolved_oxygen_probe.html Lab Grade ORP Probe Lab grade ORP probe with 10' coax cable, platinum band electrode and standard BNC connector. Epoxy sealed to handle pressure and increase average useful lifespan. Precision: +/- 1 mV. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2514/lab_grade_orp_probe.html http://www.saltwatereddies.com/images/products/ORP_probe.jpg http://www.saltwatereddies.com/content-product_info/product_id-2514/lab_grade_orp_probe.html Lab grade conductivity probe with 10' cable and Minidin 6 connector. Compensates for temperature, altitude, and salinity. Range: 0 to 19.9 ppm. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2516/lab_grade_conductivity_probe.html http://www.saltwatereddies.com/images/products/Conductivity_probe.jpg http://www.saltwatereddies.com/content-product_info/product_id-2516/lab_grade_conductivity_probe.html Energy Bar 8 Module (EB8)Neptune Systems Energy Bar 8 Module (EB8) Product Includes: - Energy Bar 8 Module (EB8) - 6-foot AquaBus Cable - 8x Built-In 120V Outlets - 6x Built-In AquaBus Ports - 4x Mounting Screws - LED Status Indicator Light - Owners Manual Product Highlights: 1. Independently Controllable Outlets: 8 outlets total consisting of 6 silent, solid state switched outlets each capable of handling up to 5 Amps and 2 mechanical relay switched outlets (not silent) capable of handling up to 10 Amps. The total current for all 8 outlets must be less than 15 Amps. Compatible with 120V electrical devices only. 2. Highly Reliable: Direct wired connection eliminates problems caused by noisy electronic ballasts and other equipment. 3. Soft-Start: Gently ramps voltage up to a device until operating parameters are reached thereby reducing wear on the device. This feature is especially important for equipment which is started and stopped on a frequent basis like pumps used for wave-making. 4. Built-In Safety: Protected by active electrical current monitoring and a circuit breaker. 5. Fail-safe Settings: During communication failures outlets revert to user defined, default settings. 6. Compact Design: Compact aluminum enclosure with 4 mounting holes for easy installation. 7. Plug and Play: Automatically recognized by the controller when installed. 8. Flexible Expansion: Built-In AquaBus ports allow for flexible and easy expansion. 9. Compatibility: Can be with used with Apex, Apex Lite and Apex Jr aquarium controllers. 10. Warranty: 1-Year Manufacturer's Limited Warranty. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2511/energy_bar_8_module_eb8.html http://www.saltwatereddies.com/images/products/energy_bar_8.jpg http://www.saltwatereddies.com/content-product_info/product_id-2511/energy_bar_8_module_eb8.html # Manufacturer: Neptune Systems # Dimensions: Base Unit: 7.5" x 2.6" x 1.1"; Display Module: 3.4" x 4.1" x 0.7"; EB8: 10.0" x 3.8" x 1.8" (L x W x H) # Availability: In Stock - Usually ships in 24 hours # Item #: NEP6001 # Package Includes: - Apex Base Unit - Temperature Probe w/ 10' Cable - Apex Display Module w/ 10' AquaBus Cable - Energy Bar 8 Module - 6' AquaBus Cable - Ethernet Cable - Owner's Manual Built-In Controller Functionality: 1. Monitor & Control pH, Temp, and ORP: Capable of monitoring and controlling pH, temperature and ORP. Instead of monitoring ORP the unit may also be used to monitor and control 2 different pH sources at the same time. 2. Sunrise and Sunset Simulation: Capable of varying the length of the day throughout the year to produce a more realistic simulation of natural lighting conditions. Used to make the length of daylight hours longer in the summer than in the winter. 3. Moon Cycle Simulation: In conjunction with a Lunar Simulator is capable of varying the intensity of light emitted from the LED's to produce a more realistic simulation of the actual lunar cycle. With this artificial moon cycle simulation it may be possible to induce corals and fish to spawn. 4. Wavemaker & Other Timed Cycles: Capable of controlling up to 20 pumps or other devices over a random or fixed period of time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Day of Week functionality allows devices to run on specific, user defined days of the week. 5. Feed Mode: A variable length feed timer capable of disabling a set of user defined pumps for a set period of time. 6. Six Digital Inputs: Equipped with 6 TTL level external inputs which can activate/deactivate equipment in response to an external stimulus. Applications include connection to water level float switches, water pressure and flow sensors and water on the floor sensors. 7. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. 8. Light Dimming Control: Dim ballasts with 0 to 10V interfaces like some T5 ballasts. 9. Fail-safe Control: During communication failures Energy Bar 8 outlets revert to user defined settings. 10 System Alarm: Email or text message alert when a monitored condition exceeds a preset value. 11. Power Failure Alarm & Power Back-Up: Email or audible alarms when the power for the Energy Bar 8 fails. Alternate AC port allows base unit to be plugged into a UPS (uninterrupted power supply) to keep it running and accessible even during a complete power outage. Features: 1. Expandable: Built-in, 2 Port AquaBus hub allows the easy addition of other AquaBus accessories. Up to 240 AquaBus modules can be connected together to control more than 1000 independent outlets and monitor more than 100 different probes or digital inputs. Supports AquaBus cable lengths up to 200+ ft. 2. Plug and Play: Automatically recognizes and configures other AquaBus modules like an Energy Bar 8. 3. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than competitive controllers. Capable of storing 1 year's worth of data logs internally. 4. Easy Software Upgrades: Download updates and new features from the web and upgrade entire system directly through AquaBus links. There is no need to disassemble the controller and individually update each AquaBus module. 5. Stable Operating System: High reliability protocol with robust error correction. 6. Increased Reliability & Accuracy: Galvanic isolation on the probes results in much more reliable and accurate probe readings. 7. Backward Compatibility: All AquaController 3 accessories work with the AquaController Apex including the PX 1000 Expansion Module, I/O breakout box, DC8, DC4, DC4HD, AquaSurf and all Lunar Simulators. 8. Enhanced Precision: Sub minute control on all Energy Bar 8 controlled devices. Set-Up: 1. Easy To Interface: Quick, intuitive and flexible menu navigation for simple set-up of pumps, lights, heaters, chiller, CO2, etc. 2. Easy To Use Technology: No programming required for configuration and unlike other products the ability to assign unique names to each of the outlets. 3. Multiple Set-Up Options: Can be configured through Apex Display Module or a standard web browser. 4. Enhance Programming Language: Allows for sophisticated, non-standard control including virtual outlets that provide even more complex control options. Connectivity: 1. Embedded Web Server: Monitor, control and configure controller from the web. Compatible with Internet Explorer, Firefox and Safari. 2. Ethernet Interface: Built-in Ethernet port. 3. Wireless Compatible: With the addition of a wireless bridge or game adapter (802.11x) wireless communication is possible. 4. Real Time Data Graphing: Interactive flash graphing application built into the web server. 5. iPhone Compatible: Interfaces with AquaNotes iPhone application. 6. RSS and XML Support. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2380/apex_w_display_module_temp_probe_eb8.html http://www.saltwatereddies.com/images/products/apex_package.jpg http://www.saltwatereddies.com/content-product_info/product_id-2380/apex_w_display_module_temp_probe_eb8.html Apex w/ Display Module & Std pH, ORP & Temp Probe & EB8Package Includes: - Apex Base Unit - Temperature Probe w/ 10' Cable - Apex Display Module w/ 10' AquaBus Cable - Energy Bar 8 Module - 6' AquaBus Cable - Ethernet Cable - Standard Grade pH probe - Standard Grade ORP probe - pH 7.0 and 10.0 Calibration Fluid (2/ea) - Owner's Manual Built-In Controller Functionality: 1. Monitor & Control pH, Temp, and ORP: Capable of monitoring and controlling pH, temperature and ORP. Instead of monitoring ORP the unit may also be used to monitor and control 2 different pH sources at the same time. 2. Sunrise and Sunset Simulation: Capable of varying the length of the day throughout the year to produce a more realistic simulation of natural lighting conditions. Used to make the length of daylight hours longer in the summer than in the winter. 3. Moon Cycle Simulation: In conjunction with a Lunar Simulator is capable of varying the intensity of light emitted from the LED's to produce a more realistic simulation of the actual lunar cycle. With this artificial moon cycle simulation it may be possible to induce corals and fish to spawn. 4. Wavemaker & Other Timed Cycles: Capable of controlling up to 20 pumps or other devices over a random or fixed period of time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Day of Week functionality allows devices to run on specific, user defined days of the week. 5. Feed Mode: A variable length feed timer capable of disabling a set of user defined pumps for a set period of time. 6. Six Digital Inputs: Equipped with 6 TTL level external inputs which can activate/deactivate equipment in response to an external stimulus. Applications include connection to water level float switches, water pressure and flow sensors and water on the floor sensors. 7. Variable Speed Pump Control: Directly control up to 4 Tunze stream pumps. 8. Light Dimming Control: Dim ballasts with 0 to 10V interfaces like some T5 ballasts. 9. Fail-safe Control: During communication failures Energy Bar 8 outlets revert to user defined settings. 10 System Alarm: Email or text message alert when a monitored condition exceeds a preset value. 11. Power Failure Alarm & Power Back-Up: Email or audible alarms when the power for the Energy Bar 8 fails. Alternate AC port allows base unit to be plugged into a UPS (uninterrupted power supply) to keep it running and accessible even during a complete power outage. Features: 1. Expandable: Built-in, 2 Port AquaBus hub allows the easy addition of other AquaBus accessories. Up to 240 AquaBus modules can be connected together to control more than 1000 independent outlets and monitor more than 100 different probes or digital inputs. Supports AquaBus cable lengths up to 200+ ft. 2. Plug and Play: Automatically recognizes and configures other AquaBus modules like an Energy Bar 8. 3. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than competitive controllers. Capable of storing 1 year's worth of data logs internally. 4. Easy Software Upgrades: Download updates and new features from the web and upgrade entire system directly through AquaBus links. There is no need to disassemble the controller and individually update each AquaBus module. 5. Stable Operating System: High reliability protocol with robust error correction. 6. Increased Reliability & Accuracy: Galvanic isolation on the probes results in much more reliable and accurate probe readings. 7. Backward Compatibility: All AquaController 3 accessories work with the AquaController Apex including the PX 1000 Expansion Module, I/O breakout box, DC8, DC4, DC4HD, AquaSurf and all Lunar Simulators. 8. Enhanced Precision: Sub minute control on all Energy Bar 8 controlled devices. Set-Up: 1. Easy To Interface: Quick, intuitive and flexible menu navigation for simple set-up of pumps, lights, heaters, chiller, CO2, etc. 2. Easy To Use Technology: No programming required for configuration and unlike other products the ability to assign unique names to each of the outlets. 3. Multiple Set-Up Options: Can be configured through Apex Display Module or a standard web browser. 4. Enhance Programming Language: Allows for sophisticated, non-standard control including virtual outlets that provide even more complex control options. Connectivity: 1. Embedded Web Server: Monitor, control and configure controller from the web. Compatible with Internet Explorer, Firefox and Safari. 2. Ethernet Interface: Built-in Ethernet port. 3. Wireless Compatible: With the addition of a wireless bridge or game adapter (802.11x) wireless communication is possible. 4. Real Time Data Graphing: Interactive flash graphing application built into the web server. 5. iPhone Compatible: Interfaces with AquaNotes iPhone application. 6. RSS and XML Support. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2518/apex_w_display_module_std_ph_orp_temp_probe_eb8.html http://www.saltwatereddies.com/images/products/apex_package3.jpg http://www.saltwatereddies.com/content-product_info/product_id-2518/apex_w_display_module_std_ph_orp_temp_probe_eb8.html Apex Jr Aquarium Controller w/ Temp Probe # Neptune Systems Apex Jr Aquarium Controller w/ Temp Probe Product Includes: - Apex Jr Base Unit (The Brain) - Temperature Probe w/ 10-foot Cable - Ethernet Cable - 2x Built-In AquaBus Ports - Owners Manual Product Highlights: 1. Remote Monitoring & Control: Built-in web-serve allows the controller to be set-up, monitored and controlled remotely through a web browser or iPhone application. 2. All in One, Compact Design: Base unit includes 4 built-in, independently controllable outlets. Each outlet is rated up to 8 Amps with the maximum of 15 Amps for all 4 outlets combined. 3. Simple Set-up: Easy to use, menu-driven set-up for lights, pumps, heaters, chillers and other equipment. No programming required. 4. Easy Expansion: Add up to 4 AquaBus modules like an Energy Bar 8 or Probe Module in addition to 1 Display Module. Supports AquaBus cable lengths up to 200 feet. 5. Plug and Play: Automatically recognizes and configures AquaBus modules. 6. Increased Reliability & Accuracy: Galvanic isolation of the probes produces more reliable and accurate readings. 7. Wireless Capable: Add a wireless bridge or wireless game adapter (802.11x) to wireless communicate with the controller. 8. Easy Software Upgrades: Download updates and new features directly from the web. No need to disassemble the controller and individually update each AquaBus module. 9. State of the Art Electronics: 32 bit processor is 5X faster and data storage is 16X bigger than other controllers. Capable of storing up to 1 year worth of data logs. 10. Stable Operating System: High reliability protocol with robust error correction. 11. Warranty: 1-Year Manufacturer's Limited Warranty. Controller Functionality: 1. Monitor & Control Temp: Monitor and control the aquarium water temperature. 2. Monitor & Control pH, ORP, Conductivity and/or Dissolved Oxygen: Monitor and control pH, ORP, Conductivity and/or Dissolved Oxygen with the addition of a Probe Module (PM) and matching probe. 3. Sunrise and Sunset Simulation: Automatically turn the aquarium lights on and off to simulate sunrise and sunset. Can also vary the length of the day throughout the year to make the daylight hours longer in the summer and shorter in the winter. 4. Moon Cycle Simulation: Mimic the actual lunar cycle by varying the intensity of the moon lights with the addition of an optional Lunar Simulator. Evidence shows that simulating the lunar cycle may help induce corals and fish to spawn. 5. Wavemaker & Other Timed Cycles: Control up to 20 pumps or other devices at the same time. On and off times are fully programmable and can range from 1 minute to 4 hours in duration in 1 minute increments. Each device can also be programmed to run on specific, user defined day(s) of the week. 6. Feed Mode: With a touch of a button, a set of user defined pumps can be disabled to allow feeding. 7. System Alarm: Send an email or text alert when a monitored condition exceeds a preset value. 8. Power Failure Alarm & Power Back-Up: Send an email alert or sound an audible alarm when the power fails. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2508/apex_jr_aquarium_controller_w_temp_probe.html http://www.saltwatereddies.com/images/products/apex_jr.jpg http://www.saltwatereddies.com/content-product_info/product_id-2508/apex_jr_aquarium_controller_w_temp_probe.html Apex Display Module w/ 10' AquaBus cable. Warranty: 1-Year Manufacturer's Limited Warranty. Manufacturer: Neptune Systems Dimensions: 3.4" x 4.1" x 0.7" (L x W x H) Availability: In Stock - Usually ships in 24 hours Item #: NEP0023 Features: 1. Plug and Play: Like all AquaBus accessories it is automatically recognized and configured by the Apex Base Unit. 2. Expandable: Multiple Display Modules can be used with the same Apex Base Unit providing full user interface and complete functionality at remote tank or equipment locations. Each Display Module has the same functionality as the primary Display Module. 3. Sleek and Stylish: 128 x 64 backlight display with sharp blue background and high contrast white characters. Includes the ability to dim the backlight at night. 4. Easy To Use: Quick, intuitive and flexible menu navigation with 7 straight-forward interface buttons. 5. Customizable: Four unique home/status screens that can each be independently configured with the ability to automatically or manually scroll between each of the different screens. User selected placement of probe names and icons. 6. Data on Demand: Ability to display data log graphs at the touch of a button. 7. Audible Warning System: User selected ring tones and songs provide unique warning for each type of system error. 8. Easy To Install: Compact case with mounting holes for easy attachment to stand or wall. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2314/apex_display_module_w_10_aquabus_cable.html http://www.saltwatereddies.com/images/products/apex_display_module.jpg http://www.saltwatereddies.com/content-product_info/product_id-2314/apex_display_module_w_10_aquabus_cable.html Intermatic 40 amp DPDT digital timer, GM40 The GM40 Multi-Volt Series Time Controls are universal, electromechanical time switches which can be field configured for various power supply voltages. The voltage options include 120VAC, 208/240VAC, and 277VAC, all within the same unit! Selection of the desired supply voltage is easily achieved by selecting the DIP to the corresponding input voltage. The mechanism is mounted in a compact NEMA 3R outdoor enclosure and features a DPDT switching configuration standard (i.e. two normally open and two normally closed contacts). Shipment Dimensions: * Weight: 4 lb * Height: 8 in * Width: 6 in * Depth: 4 in http://www.saltwatereddies.com/content-product_info/product_id-2498/intermatic_40_amp_dpdt_digital_timer_gm40.html http://www.saltwatereddies.com/images/products/40_AMP-timer.jpg http://www.saltwatereddies.com/content-product_info/product_id-2498/intermatic_40_amp_dpdt_digital_timer_gm40.html American Marine Pinpoint pH Monitor Package American Marine PINPOINT pH Monitor The PINPOINT pH Monitor is in use by thousands of customers worldwide. This affordable unit remains the only full-time pH monitor with .01 resolution. The PINPOINT pH Monitor requires only a 9-volt battery and is sold complete with probe and calibration fluids. The electrode is also available separately and fits any meter or monitor. Comes complete with meter, probe and all calibration fluids. * Given proper care, the PINPOINT pH Monitor should last a lifetime. * PINPOINT pH Probe comes with a 10 foot high supression cable and a BNC connector. * Powered by a standard 9-volt battery (not included). * Optional AC Adaptor Kit * 2 Year Manufacturer`s Warranty American Marine PINPOINT High-Precision pH Calibration Fluids 10.000 +/- 0.002 These come in single-use plastic envelope packets, and they are extremely accurate and field portable. Each packet contains enough fluid for a complete calibration (about 30 ml) and is intended to be discarded after use. pH monitor and controllers should be calibrated monthly. American Marine PINPOINT High-Precision pH Calibration Fluids 7.000 +/- 0.002 These come in single-use plastic envelope packets, and they are extremely accurate and field portable. Each packet contains enough fluid for a complete calibration (about 30 ml) and is intended to be discarded after use. pH monitor and controllers should be calibrated monthly. Includes Pinpoint pH Monitor, pH probe, AC adapter kit, and 3 sets of each calibration fluid (#7.00 & #10.00) Specifications PH Probe * comes with a 10 foot high supression cable and a BNC connector * high interference suppression jacket and Ag-AgCl reference Monitor * full-time pH monitor with .01 resolution AC Adapter Kit * 110vac * electronic filtering (avoid electrical interference) Calibration Fluid * come in plastic envelope packets (about 30 ml) * 7.000 +/- 0.002 10.000 +/- 0.005 Manufacturer Info American Marine Pinpoint Aquarium Supplies American Marine was founded in 1989 by a devoted aquaculturist who was passionate about quality and precision. Back in the late 80s, critical water quality parameters were mostly tested with colorimetric test kits. Some digital instruments were borrowed from university or laboratory sources with mixed results but always a high price tag. Expensive European aquarium equipment was always a disappointment when it finally arrived. Inexpensive "pens" gave no better results than color test kits and prematurely failed even when testing for approximate readings. Using the most current technology and design, American Marine introduced Pinpoint Monitors, which have become the most respected line of digital instruments in the aquaculture business. American Marine was the first to introduce a 2-year warranty on each and every monitor. For every purpose, from a goldfish bowl to a salmon hatchery, Pinpoint Monitors are called into duty every day because of their rugged design, precise readings and reasonable cost. American Marine has sold Pinpoint Monitors on every continent. Each monitor is powered by a standard 9 volt battery that is available worldwide. Warranty Manufacturer Warranty: 2 years. All warranty services are handled directly by American Marine. http://www.saltwatereddies.com/content-product_info/product_id-2497/american_marine_pinpoint_ph_monitor_package.html http://www.saltwatereddies.com/images/products/American-Marine-Pinpoint-pH-Monitor-Package.jpg http://www.saltwatereddies.com/content-product_info/product_id-2497/american_marine_pinpoint_ph_monitor_package.html Ozotech Poseidon 200 mg-hr ozone generator with patented Cold Spark corona discharge, 115 volt. Includes variable output control. The Poseidon, when compared to other Ozone Generators offered in the 200 mg/hr range, outperforms them all. Based on a patented "Cold Spark" technology, the output remains constant for years, is higher in concentration by weight at usable airflow rates, possesses superior quality and workmanship and us manufactured in the U.S.A. Features: * LIFETIME WARRANTY * Patented Cold Spark Corona Discharge * 12 VDC, 800mn ( AC/DC adaptor is included) * Rugged Aluminum Enclosure * Stainless Steel C/D Manifolds * Factory Tested and Calibrated * Medium Frequency, Solid State Electronics * Wall Mountable * Corrosion Resistant Benefits * Unlike UV ozone generators, the output does not degrade overtime * High output gas concentration for enhanced solubility * Simple and reliable operation * Easy to service , virtually maintenance free * The only true 200 mg/hr generator at usable airflow rates Dimensions 1 4.25" x H 2.5" x L7.5" California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1458/ozotech_poseidon_200_mg_hr_ozone_generator.html http://www.saltwatereddies.com/images/products/ozotechPosieden.jpg http://www.saltwatereddies.com/content-product_info/product_id-1458/ozotech_poseidon_200_mg_hr_ozone_generator.html Gen -X Ozone generator. Adjustable 0 - 250 mg / hr corona discharge ozone unit. From Pacific Coast Imports. Shipment Dimensions: * Weight: 2 lb * Height: 9 in * Width: 8.9 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1440/gen_x_ozone_generator.html http://www.saltwatereddies.com/images/products/Gen-x Ozone Generator 1.jpg http://www.saltwatereddies.com/content-product_info/product_id-1440/gen_x_ozone_generator.html SpectraPure LiterMeter 3: The new LiterMeter III is an automatic precision dosing system for the aquarium and horticulture industry. Three independent programs control one built-in pump and up to two external pumps (sold separately). Perform 2-way water changes, in addition to eliminating the manual drudgery of dosing Kalkwasser, trace elements, or topping off evaporated water. Quiet operation, auto-calibration, and virtually maintenance-free. Calcium maintenance and alkalinity control are essential for a healthy reef tank. SpectraPures LiterMeter III eliminates the manual drudgery of dosing Kalkwasser, trace elements, or topping off evaporated water. Kalkwasser replenishment, to be most effective, should be added to your aquarium slowly and consistently to avoid precipitation of calcium carbonate. The LiterMeter III automatically and reliably performs this task for you. The LiterMeter III offers features found only on expensive laboratory pumps. Built-in calibration features eliminate the guesswork of uncalibrated competitive units. Unlike noisy industrial metering pumps sold to the aquarium trades, SpectraPures LiterMeter III was specially designed for critical aquarium dosing and is so quiet you can use it in your living room. Superior three-roller direct-motor drive eliminates noisy gears and improves flow accuracy and tubing life. It can be run dry without damage, and pumps either from a draw height of 12 feet or to a delivery height of 60 feet. Three independent programs control the internal pump, as well as two optional external pumps. The LM3-RPM is a LiterMeter III pump mounted in a small plastic box. The LM3-TCM (SP1095) is an optional level sensor that interrupts power to the LiterMeter III when a high water level is detected. The LM3-WXM (SP1093) combines an LM3-RPM (SP1091) and an LM3-TCM (SP1095) in one package, interrupting power only to that pump. See the Operations Manual for application examples. Quietest pump on the market; excellent for reef tanks One internal pump provided with unit, remote pumps optional Fully automatic pump operation - Set it and forget it Precision calibration feature eliminates guesswork Dependable and virtually maintenance free Self-priming and Anti-siphoning Compact size and cool operation Uses less than 6 Watts of power when operating 5 years warranty Precision dosing system can be powered directly from a 12VDC battery Highest quality precision dosing system - incomparable accuracy Manufacturer Info SpectraPure Aquarium Supplies SpectraPure was established in 1985 and is located in Tempe, Arizona, home of Arizona State University. SpectraPure is dedicated to excellence in the design and manufacture of water filtration and purification systems for household, commercial, laboratory and light industrial applications. Their product lines includes a full range of systems and equipment, including drinking water systems, water softeners, filtration systems, reverse osmosis units, RO/DI and deionization systems and many other technological innovations and water purification accessories. SpectraPure provides innovative, state-of-the-art solutions to water purity problems and applications. Warranty Manufacturer`s Warranty: 5 years from date of purchase. California Sales Tax Notice:CA orders Only please add 8.75% State Tax California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice. http://www.saltwatereddies.com/content-product_info/product_id-2483/spectrapure_litermeter_3.html http://www.saltwatereddies.com/images/products/SpectraPure-LiterMeter-3.jpg http://www.saltwatereddies.com/content-product_info/product_id-2483/spectrapure_litermeter_3.html SpectraPure Ultra-Precise ATO holds your tank's salinity constant while adding replacement water or Kalc in small doses. The pump can operate in either "fill mode" or "drain mode" when the water level changes. The Sensor Tube can be pre-set to operate with a minimal (0.1") change in water level up to a 4" difference. This calibration is saved even after a loss of power. The ATO runs on a ten-second cycle. The pump can be on for any number of seconds each cycle, including zero (always off) and ten (always on). After the Ultra-Precise ATO is powered up, use the UP and DOWN buttons to adjust the ON-time in 10% steps. (This value is also saved even after a loss of power). The pump used in the Ultra-Precise ATO is the same pump that is in the LiterMeter III , the leader in aquatic dosing for over 10 years. Now with our new improved, long life Peristaltic tubing. This is the quietist, most reliable Peristaltic Pump ever made. Quality that you can see, performance you won't believe. Fully automatic operation - Can be programmed for "fill modeor drain mode" New and Improved Pump. Highest quality and accuracy High reliability metal LiterMeter III pump Virtually maintenance free No check valves to clog or seals to leak Self-priming and anti-siphoning Hi-limit float switch for fail-safe operation High delivery pressure - over 40 psi Compact size and cool operation Kalkwasser and Chemical safe No damage to the pump if run dry Quiet operation and low power consumption Complete system consumes less than 4 Watts when pump is on Pump Flow Rate: Adjustable in 10% Steps up to 200 mL/min Extended 5-year Warranty Manufacturer Info SpectraPure Aquarium Supplies SpectraPure was established in 1985 and is located in Tempe, Arizona, home of Arizona State University. SpectraPure is dedicated to excellence in the design and manufacture of water filtration and purification systems for household, commercial, laboratory and light industrial applications. Their product lines includes a full range of systems and equipment, including drinking water systems, water softeners, filtration systems, reverse osmosis units, RO/DI and deionization systems and many other technological innovations and water purification accessories. SpectraPure provides innovative, state-of-the-art solutions to water purity problems and applications. California Sales Tax Notice:CA orders Only please add 8.75% State Tax California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice. http://www.saltwatereddies.com/content-product_info/product_id-2484/spectrapure_u_p_l_c_ultra_precise_level_controller_ii.html http://www.saltwatereddies.com/images/products/SpectraPureUltra-Precise-Level-Controller.jpg http://www.saltwatereddies.com/content-product_info/product_id-2484/spectrapure_u_p_l_c_ultra_precise_level_controller_ii.html Electronic Thermometer, waterproof, heavy duty (Hanna). Shipment Dimensions: * Weight: 0.35 lb * Height: 10 in * Width: 3 in * Depth: 2 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1576/waterproof_electronic_thermometer.html http://www.saltwatereddies.com/images/products/digitThermo.jpg http://www.saltwatereddies.com/content-product_info/product_id-1576/waterproof_electronic_thermometer.html Tunze Multicontroller 7096 TUNZE Multicontroller 7096 is a control device for all Turbelle pumps fitted with an electronic motor, which can be adjusted by computer when attached by USB cable. For the adjustment, the Multicontroller does not need a connection to the pumps in the tank. After adjustment and disconnection from the computer, the data are saved in the Multicontroller automatically. It contains all functions, simulates the various flow conditions of the sea in the aquarium, and has an especially light LED moonlight. Includes: Multicontroller with photo-electric cell, moonlight, and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. Suitable for MS-Windows 98, 2000, XP and Vista. Manufacturer Info Tunze For forty-five years the name TUNZE has been synonymous with aquariums. Many products and components which we have developed in the course of time are now standard features of aquarium technology today. This confidence in TUNZE is no coincidence. The company has remained true to its philosophy right from the beginning, researching water biotopes all over the world to develop components which enable natural water conditions in the closed environment of an aquarium. In the implementation of know-how, effectiveness and efficiency, TUNZE takes the lead in environmental compatibility. Their motto is: quality and reliability. These values are upheld with well thought-out and precise tool making by highly qualified experts. The brand names of TUNZE and Turbelle meet the expectations of the seal of quality; Made in Germany. Many of the products shown in this catalog are protected by national and international patents. California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2457/tunze_multicontroller_7096.html http://www.saltwatereddies.com/images/products/Tunze-Multicontroller-7096.jpg http://www.saltwatereddies.com/content-product_info/product_id-2457/tunze_multicontroller_7096.html Tunze Multicontroller 7095: TUNZE Multicontroller 7095 is a digital control unit for all Turbelle pumps fitted with driver 7240.26 and 7240.27 operating on safety extra-low voltage. It simulates the various marine current conditions in the aquarium, and thus is suitable for use with Turbelle 5001, 6101, 6201, 6301. By means of the pump adapter 7094.40, Turbelle classic 2002, 4002 can also be controlled. Multicontroller 7095 can control up to eight Turbelle, and contains an LED moonlight with a 29-day moon phase. A wavebox 6212 and the pumps mentioned above can also be controlled by the Multicontroller. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent. Delivery with four connecting cables 7092.30 and a photo-electric cell, permitting a near-natural current control with up to four Turbelle electronic. Y adapter 7092.34 can be used to connect up to eight Turbelle electronic which are controlled in pairs. NOTE: Products are sold in 110V conversions. Please verify your countrys volt conversion before making any electrical purchase. Main Features * Wave simulation function * Tidal current control * Night mode operation including photoelectric cell * Sequential pump circuit * Random flow * Foodtimer * Up to four Turbelle electronic or stream 6000/6100/6200 to be extended up to a maximum of eight pumps with Y-adapter New functions: * Waterproof membrane keypad on new housing * LED moonlight with 29-day moon phase including universal mount * Two interval functions for tidal current control with alternating on/off switch function of the pumps or alternating operation of pump capacity * Display of the capacity of the pump connected California and Washington State Sales Tax Notice: CA and WA orders only) In most cases CA and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2456/tunze_multicontroller_7095.html http://www.saltwatereddies.com/images/products/Tunze-Multicontroller-7095.jpg http://www.saltwatereddies.com/content-product_info/product_id-2456/tunze_multicontroller_7095.html American Marine PINPOINT ORP Controller PINPOINT ORP (REDOX) Controller is an inexpensive rugged controller complete with a platinum ORP probe. This device will automate another electrical device like an ozonizer or ozone generation unit within a range selected by the user. This full feature controller will accommodate an electrical device up to and including 5 full amps. Comes complete with probe. * The PINPOINT ORP Controller is the perfect way to automate ozone in the aquarium. * 110 VAC operation. * Never needs calibration. WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2454/american_marine_pinpoint_orp_controller.html http://www.saltwatereddies.com/images/products/American-Marine-Pinpoint-ORP-Controller.jpg http://www.saltwatereddies.com/content-product_info/product_id-2454/american_marine_pinpoint_orp_controller.html CO2 Bubble Counter by Aqua Medic. The Bubble Counter is a simple and safe unit for monitoring the dosage of CO2 gas into aquarium, fish tanks, and filter components. Designed to be installed in the low pressure section of your gas delivery system, the Bubble Counter visually displays the flow rate of CO2 gas as it is being delivered. This allows fine adjustments to be made and easily verified. An integrated non-return valve prevents water back flow and the holding plate lets you install the Bubble Counter in an easily viewable area. The Bubble Counter is an invaluable tool whether you are feeding a CO2 Reactor for live plants or regulating the pH inside a Calcium Reactor, the visual display of flow rate helps ensure you are getting the most from your CO2 system. Bubble counter with integrated non return valve and a strong mounting plate. The bubble counter has to be mounted in a way, that he is always without pressure. The needle valve has to be mounted between the CO2 bottle and the bubble counter. Contents 1. CO2 inlet, from the CO2 pressure bottle 2. CO2 exit port to the aquarium/CO2 reactor 3. transparent counter tube 4. plug with connections 5. non return valve, with silicon "umbrella" 6. connection fitting, 1/6" 7. bubble inlet tube 8. holding clamp 9. holding plate 10. rubber sucker Connections: - inlet: flexible tube, 6/4 mm diameter (1/4 - 1/8 inch). It is connected to the fitting with the transparent acrylic pipe , going to the bottom of the counter and the non return valve - outlet: flexible tube, 6/4 mm diameter (1/4 - 1/8 inch). Installation The mounting plate of the counter is fixed to the wall or the aquarium stand, near the CO2 bottle. It can either be mounted with the rubber suckers on a glass plate (aquarium) or directly with screws on the wall. The bubble counter is then opened carefully, filled for 1/3 with water, closed again and carefully pressed into the holder. Take care to keep the O ring of the plug and the top part of the transparent counter tube dry. If these parts are wet, the counter will not be CO2 tight. If both tubes are connected to the CO2 reactor (or the filter) and the pressure, the needle valve of the reactor can be opened. Now bubbles can be seen and counted at the bottom of the thin acrylic tube. The quantity of the bubbles can be adjusted at the needle valve. Maintenance If the water in the bubble counter is evaporated, it has to be renewed. Shipment Dimensions: * Weight: 0.4 lb * Height: 4 in * Width: 3.9 in * Depth: 3 in WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1710/co2_bubble_counter_aquamedic.html http://www.saltwatereddies.com/images/products/CO2BublCounter.jpg http://www.saltwatereddies.com/content-product_info/product_id-1710/co2_bubble_counter_aquamedic.html Sol Base Controller # Manufacturer: AquaIllumination # Availability: Back Ordered - Usually ships in 1-2 weeks # Item #: AI1005 AquaIllumination Sol Base Controller complete with 12 ft controller cable and built-in mini USB port. Mini USB port allows the controller to be easily updated with the latest AquaIllumination software. Compatible with all AquaIllumination Sol and Nano Sol LED systems and modules. Warranty: 1 Year Manufacturer Warranty. Controller Functionality: 1. Adjusts intensity from 0 to 100%. 2. Independent control of white and blue LED lamps allowing the color to be adjusted from warm white (approximately 6500K) to deep blue (greater than 20000K). 3. Two control settings; Automatic and Manual. In Automatic Mode the sun rises and falls at user determined times and the fixture automatically transitions into the corresponding moon cycle for the duration of the 24-hour period. The 16 unique user defined set points can simulate cloud cover and other light variations. In Manual Mode the light may be set to the desired intensity and color and turned on-off manually. 4. Moon intensity automatically adjusts to follow the actual lunar cycle of ~29 day. http://www.saltwatereddies.com/content-product_info/product_id-2378/sol_base_controller.html http://www.saltwatereddies.com/images/products/ai_SolController.jpg http://www.saltwatereddies.com/content-product_info/product_id-2378/sol_base_controller.html The R2 Moonlight controller allows the user to set their R2 Moonlight to automatically change brightness according to the phases of the moon! A manual mode and fixed brightness mode are also possible. With the use of the R2 Moonlight Controller and any of the R2 Moonlights you will have the best, most complete moonlighting solution on the market today! Works with all the R2 Moonlights (R2 Signature Series 24 inch, 36 inch, 48 inch, Extreme and Dual Extreme Lights) Works with all R2 Moonlights. Intelligent CPU based design. 8-foot pass through cable included. Three Great Modes. Uses the power source from your R2 Moonlight. Shipment Dimensions Weight: 4 lb Height: 6 in Width: 4 in Depth: 2 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1462/r2_moonlight_controller.html http://www.saltwatereddies.com/images/products/R2moonctrl.jpg http://www.saltwatereddies.com/content-product_info/product_id-1462/r2_moonlight_controller.html Georg Fischer super controller. Multi-Parameter controller with pH, ORP, and temperature probes. Includes dual output relay control module, inline and/or submersible laboratory grade pH and ORP probes, laboratory grade temperature probe, and four parameter input/output module. The 8900 Multi-Parameter Controller takes the concept of modularity to the extreme. Ultimate flexibility is achieved via plug-in modules for either two or four input channels, universal AC line voltage or 12 to 24 VDC operation, up to four analog outputs, and up to four relays. The controller will support up to four additional relays, for a total of eight, by way of external relay modules. Absolute input versatility allows mixing and matching of up to four sensors with S3L output including pH, ORP, conductivity/resistivity, pressure, temperature, and level. Two of the possible four input channels may be used for any combination of the many +GF+ SIGNET flow sensors with frequency output. Shipment Dimensions: * Weight: 4 lb * Height: 12 in * Width: 11.9 in * Depth: 11.9 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1712/multi_parameter_super_controller_8900.html http://www.saltwatereddies.com/images/products/Multi-ParameterSuperController8900.jpg http://www.saltwatereddies.com/content-product_info/product_id-1712/multi_parameter_super_controller_8900.html *** Price Good While Supplies Last *** AquaController 3 Pro with backlight has the capability to monitor and control pH, temperature, ORP, conductivity, and dissolved oxygen, set off an audible alarm or send an e-mail when a monitored condition exceeds a preset value or the systems power fails, simulate sunrise, sunset and moon cycles, control powerheads/pumps for wavemaking, and perform data-logging. Alarm E-mail includes current pH, temperature, ORP, conductivity and dissolved oxygen, power status, and the state of all controlled devices at the time of the alarm event. Also features a built-in Ethernet port with web interface. *** Price Good While Supplies Last *** California Sales Tax Notice:CA orders Only please add 8.75% State Tax California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice. http://www.saltwatereddies.com/content-product_info/product_id-1732/aquacontroller_3_pro_base_unit_w_backlight.html http://www.saltwatereddies.com/images/products/Aquacontoller3Pro.jpg http://www.saltwatereddies.com/content-product_info/product_id-1732/aquacontroller_3_pro_base_unit_w_backlight.html Via Aqua ACRO Calcium Reactor AC-30. Acro-Cal Calcium Reactor. 22.75 inch H x 5.5 inch W Includes built in water pump. For use in sump or hanging. Comes with bubble counter. Easy to remove twist off top. Affordable. For aquariums from 10-75 gallons. Built in bleed valve. Acro-cal calcium reactor offers a simple and convenient solution for maintaining calcium and alkalinity in your reef tank. After the initial setup, the calcium reactor requires minimal maintenance. A calcium reactor is almost a necessity for tanks heavily stocked with stony coral where calcium and alkalinity demands are high and will promote coral line algae growth. Calcium reactors provide a steady supply of calcium by using CO2 to dissolve media in the reactor and, thus, releasing calcium into your water. The effluent released also acts as a buffer to stabilize kh. Shipment Dimensions: * Weight: 8.5 lb * Height: 24 in * Width: 6 in * Depth: 6 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1658/acro_cal_calcium_reactor_ac_30.html http://www.saltwatereddies.com/images/products/ViaAqua_AcroCal_calcium_reactors.jpg http://www.saltwatereddies.com/content-product_info/product_id-1658/acro_cal_calcium_reactor_ac_30.html AquaZone Deluxe 200 - 200 mg/hr Ozonizer/Controller plus ORP Probe and 250cc Air Drier Applying ozone to your tank raises the ORP, increasing oxygen levels and decreasing dissolved wastes; ozone also effectively kills numerous harmful pathogens. AquaZone ozonizer`s corona discharge technology provides higher ozone concentration than UV bulb style ozonizers and allows variable ozone output. Just dial in the amount of ozone that your tank needs! Specifications * Automatically controls the flow of ozone according to a pre -set ORP * Easy to read backlit digital display * Easy adjustment of ozone output and desired ORP * Continuous display of current ORP * Safe and easy to use * Includes 250cc Air Drier All units are just 1 1/4 lbs. and 6 5/8"L x 6 1/4"W x 2 1/4"H. What's in the Box * 200 mg/hr ozone creator w/ ozone output control and ORP set point * ORP probe with 5 ft cable * ac adapter * air dryer Manufacturer Info Red Sea is widely recognized as a leading innovator and manufacturer of quality products for aquarium hobbyists. With a dedicated team of chemists, biologists and other professionals, Red Sea constantly strives to provide hobbyists of all levels with highly effective solution-driven products designed to make your fish-keeping experience as enjoyable and successful as possible. The embodiment of Red Seas dedication to making it easy is the range of unique RED SEA MAX aquariums- The only choice for true plug & play coral reef aquariums. The Red Sea Max is complemented by Red Seas Coral Pro salt which has become the salt of choice for those seeking the very highest quality water quality for their coral reef aquariums. Coral Pro is made using a unique natural process which delivers unrivaled homogeneity and is perfect for delicate corals. A comprehensive range of substrates, reef test labs & supplements and a full program of protein skimmers including the new C-Skim 1200 completes Red Seas marine portfolio and reinforces their reputation as leaders in their field.. For those seeking the very best in planted freshwater aquariums, Red Sea also offers a complete program suitable for every size of aquarium. Whatever your aquatic needs, Red Sea delivers high quality innovative, solution based products. Warranty Manufacturer`s Warranty: 1 year from date of purchase. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1433/aquazone_deluxe_200_mg_hr_ozonizer_w_orp_controller_probe.html http://www.saltwatereddies.com/images/products/ozone2.jpg http://www.saltwatereddies.com/content-product_info/product_id-1433/aquazone_deluxe_200_mg_hr_ozonizer_w_orp_controller_probe.html Red Sea AquaZone Deluxe 50 mg/hr ozonizer AquaZone Deluxe 5050 mg/hr Ozonizer/Controller plus ORP Probe and 250cc Air Drier Applying ozone to your tank raises the ORP, increasing oxygen levels and decreasing dissolved wastes; ozone also effectively kills numerous harmful pathogens. AquaZone ozonizer`s corona discharge technology provides higher ozone concentration than UV bulb style ozonizers and allows variable ozone output. Just dial in the amount of ozone that your tank needs! * Automatically controls the flow of ozone according to a pre-set ORP * Easy to read back-lit digital display * Easy adjustment of ozone output and desired ORP * Continuous display of current ORP * Safe and easy to use. * Includes 250cc Air Drier All units are just 1 1/4 lbs. and 6 5/8"L x 6 1/4"W x 2 1/4"H. 1-year manufacturer`s warranty from date of purchase. Manufacturer Info Red Sea is widely recognized as a leading innovator and manufacturer of quality products for aquarium hobbyists. With a dedicated team of chemists, biologists and other professionals, Red Sea constantly strives to provide hobbyists of all levels with highly effective solution-driven products designed to make your fish-keeping experience as enjoyable and successful as possible. The embodiment of Red Seas dedication to making it easy is the range of unique RED SEA MAX aquariums- The only choice for true plug & play coral reef aquariums. The Red Sea Max is complemented by Red Seas Coral Pro salt which has become the salt of choice for those seeking the very highest quality water quality for their coral reef aquariums. Coral Pro is made using a unique natural process which delivers unrivalled homogeneity and is perfect for delicate corals. A comprehensive range of substrates, reef test labs & supplements and a full program of protein skimmers including the new C-Skim 1200 completes Red Seas marine portfolio and reinforces their reputation as leaders in their field.. For those seeking the very best in planted freshwater aquariums, Red Sea also offers a complete program suitable for every size of aquarium. Whatever your aquatic needs, Red Sea delivers high quality innovative, solution based products. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2284/aquazone_deluxe_50_mg_hr_ozonizer.html http://www.saltwatereddies.com/images/products/Red-Sea-AquaZone-Deluxe-50-mg-hr-ozonizer-99.jpg http://www.saltwatereddies.com/content-product_info/product_id-2284/aquazone_deluxe_50_mg_hr_ozonizer.html Ozotech model OZ2PCS-V/SW 200 mg-hr ozone generator with patented control. Shipment Dimensions: * Weight: 18 lb * Height: 18 in * Width: 12 in * Depth: 12 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1459/ozotech_model_oz2pcs_v_sw_200_mg_hr.html http://www.saltwatereddies.com/images/products/Ozotech2.jpg http://www.saltwatereddies.com/content-product_info/product_id-1459/ozotech_model_oz2pcs_v_sw_200_mg_hr.html Below is a link to the latest CoralVue Products. Any of these products may be ordered here through Saltwater Eddies LLC. Not all of the products offered from CoralVue are listed on our website, so we offer you a link to their products and their home page. You may call us at 503-380-2023, or email us at support@SaltwaterEddies.com to any questions you may have. Catalog: copy and paste the link below or click on "click here for more information" to see CoralVue products available: http://coralvue.com/ Thanks for shopping! http://www.saltwatereddies.com/content-product_info/product_id-2206/coralvue_product_online.html http://www.saltwatereddies.com/images/products/CoralVue.jpg http://www.saltwatereddies.com/content-product_info/product_id-2206/coralvue_product_online.html Below is a link to the latest catalog of products from Aqua Medic of North America. Any of these products may be ordered here through Saltwater Eddies LLC. Not all of the products offered from Aqua Medic of North America are listed on our website, so we offer you a link to their catalog and their home page. You may call us at 503-380-2023, email us at support@SaltwaterEddies.com or speak with someone at Aqua Medic of North America via their website contact info ( Sales: +1 970.776.8629 / +1 877.323.2782) to answer any questions you may have about any Aqua Medic Products. Catalog: copy and paste the link below or click on "click here for more information" to see or download the catalog: http://www.aqua-medic.com/ Thanks for shopping! http://www.saltwatereddies.com/content-product_info/product_id-2205/aqua_medic_catalog_of_products.html http://www.saltwatereddies.com/images/products/AquaMedic.jpg http://www.saltwatereddies.com/content-product_info/product_id-2205/aqua_medic_catalog_of_products.html Aqua Logic Digital Temperature Controller 115 Volt 15 amp 115-Volt 15 Amp digital chiller controller in a NEMA enclosure. Comes with normal power cord #5-15P Male plug. Single Stage Temperature Controller Specifications: Aqua Logic Model Number: TR115SN Voltage: 115V Amp Load Capacity Full Load: 9.8 amps Locked Rotor: 58.8 amps Resistive Heater: 9.8 amps Use with the Following Site Chillers: 1/6 to 1/2 hp 115v Chillers Temperature Controllers by Aqua Logic Maintaining accurate temperature control optimizes the stability of aquatic life and controls various life cycles while helping to keep the live stock resistant from disease. For cooling applications in industry that require precise heat exchange, Aqua Logic is the leading expert in innovative solutions that create better temperature control of processes, materials and environments. Aqua Logic offers an array of custom-built temperature and control equipment along with the technical expertise you need for your specific requirements. Each of our temperature controller units are designed with capabilities that set the industry standard. Proper control of temperature can make or break many processes. We can help to make it work, and make it work right. If your project has need of temperature control, call Aqua Logic. TEMPERATURE CONTROLLERS Aqua Logic digital temperature controllers can be used in a variety of applications where a device needs to be turned on / off based on temperature rise or fall. The Single Stage controller operates on one device, either a chiller (fan) or a heater. The Dual Stage controller can be connected to both a chiller and heater, but only allows one device to be on at a time. A three-button touch keypad selects Degrees F or C, set point temperature, differential and operating mode (heating or cooling). A keypad lockout provides tamper-proof protection and EEPROM memory retains control settings during power outages. The NEMA 4X enclosure is rated watertight for outdoor use. This temperature controller out performs others costing substantially more. Temperature range for the controller is from -30 to 220 F (-22 to 105 C). The differential adjustment range is 1 to 30 F. Power cord lengths from the controller to the power supply and from the controller to the device being controlled are 40 inches (1 m) each. The temperature sensor probe is encapsulated in titanium making it completely waterproof for both fresh water and saltwater environments. Shipment Dimensions: * Weight: 10 lb * Height: 10 in * Width: 6 in * Depth: 3 in CA and Washington State Sales Tax Notice: CA and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2067/aqua_logic_digital_temperature_controller.html http://www.saltwatereddies.com/images/products/A-logic_chiller_temperature_controller.jpg http://www.saltwatereddies.com/content-product_info/product_id-2067/aqua_logic_digital_temperature_controller.html The smallest and lightest TDS meter on the market. - Sleek design is perfect for personal or consumer use. - Advanced microprocessor technology. - Hold Function: saves measurements for convenient reading and recording. - Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. - Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. From 1000 to 9990 ppm, the resolution is in increments of 10 ppm, indicated by a blinking 'x10' image. - Display: large and easy-to-read LCD screen. - Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Specifications - Range: 0 - 9990 ppm (mg/L) - Resolution: 1 ppm - Accuracy: +/- 2% - ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) - Power source: 2 x 1.5V button cell batteries (included) - Battery life: 1000 hours of usage - Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55 inches) - Weight: 34g (1.2 oz) Shipment Dimensions: * Weight: 0.05 lb * Height: 9 in * Width: 3 in * Depth: 1 in California Sales Tax Notice and Washington State Sales Tax Notice: CA and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1906/tds_4_pocket_size_meter.html http://www.saltwatereddies.com/images/products/Tds_meter.JPG http://www.saltwatereddies.com/content-product_info/product_id-1906/tds_4_pocket_size_meter.html Red Sea CO2 Pro System DELUXE for PAINTBALL CO2 cylinders (CO2 cylinder not included). Includes Red Sea Reactor 500, solenoid valve, CO2 Regulator for Paintball CO2 cylinders, high precision in-line Needle Valve, Bubble Counter with integrated check valve, real time CO2 monitor, and 3 meters of CO2 tubing. Shipment Dimensions: * Weight: 3.2 lb * Height: 16 in * Width: 14 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2018/red_sea_co2_pro_system_deluxe_for_paintball.html http://www.saltwatereddies.com/images/products/Red_sea_deluxe_co2_pro_system_.jpg http://www.saltwatereddies.com/content-product_info/product_id-2018/red_sea_co2_pro_system_deluxe_for_paintball.html The Xwave Wave Maker Series is designed to create the most natural simulation of the ocean waves in your tank. It can simulate the pulsing wave and turbulence current, which occur in the natural environment. It make your corals and fishes seems in the real ocean. The Xwave Multi-controller is a electronic device to be used with the Xwave Powerhead. It has 5 different modes to create a various wave environment in the ocean for your aquarium. Multi-controller can control up to two Xwave powerheads. It also contains a super-lux LED which work with the build-in timer to simulate the moonlight as the natural environment. Shipment Dimensions: * Weight: 0.8 lb * Height: 9 in * Width: 4 in * Depth: 2 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2061/x_wave_wave_controller.html http://www.saltwatereddies.com/images/products/xwave_wave_creator.jpg http://www.saltwatereddies.com/content-product_info/product_id-2061/x_wave_wave_controller.html The Wave2K was developed to give the marine hobbyist, for the first time, total water movement. The circulation created from our machine, as in the ocean, cycles between forward water motion (wave in) and the action of that wave going back out. The Wave 2K forces water out of the top of the machine while pulling a similar volume in the bottom, then it reverses that cycle and forces out of the bottom, while pulling water in the top. This reversing action produces the same chaotic movement as you would see snorkeling in the ocean. Imagine pushing out and pulling in 8.8 gallons during each up and down cycle. Now imagine this taking place every 6 seconds, or ten times a minute, or 600 times per hour! Now imagine actually having a small wave across the top surface of your tank, and the joy of watching those flowing type corals actually moving back and forth just as they do in the wild! Machine uses surge flow, out while taking water in every 6 seconds, the container holds about 2.3 gallons and cycles 10 times per minute- approx flow 4000 gallons an hour, while running silently and creating random currents and eddies. Dimensions (L x W x H): 10" x 5.5" x 16.25" Flow Features: 1 = Corner Unit: Low to medium flow in 55 gallons 2 = Center Unit: High flow to 120, good flow to 180 3 = 2 Corner Units: High flow to 55, medium flow to 90 4 = 2 Center Units: Very high flo California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1621/wave2k_wavemaker_corner_unit.html http://www.saltwatereddies.com/images/products/Wave2k.jpg http://www.saltwatereddies.com/content-product_info/product_id-1621/wave2k_wavemaker_corner_unit.html Aqua Logic Dual Digital Temperature Controller 115 Volt 15 amp The Dual Stage controller can be connected to both a chiller and heater, but only allows one device to be on at a time. 115-Volt 15 Amp digital chiller controller in a NEMA enclosure. Comes with normal power cord #5-15R Male plug. Single Stage Temperature Controller Specifications: Aqua Logic Model Number: TR115DN Voltage: 115V Amp Load Capacity Full Load: 9.8 amps Locked Rotor: 58.8 amps Resistive Heater: 9.8 amps Use with the Following Site Chillers: 1/6 to 1/2 hp 115v Chillers Temperature Controllers by Aqua Logic Maintaining accurate temperature control optimizes the stability of aquatic life and controls various life cycles while helping to keep the live stock resistant from disease. For cooling applications in industry that require precise heat exchange, Aqua Logic is the leading expert in innovative solutions that create better temperature control of processes, materials and environments. Aqua Logic offers an array of custom-built temperature and control equipment along with the technical expertise you need for your specific requirements. Each of our temperature controller units are designed with capabilities that set the industry standard. Proper control of temperature can make or break many processes. We can help to make it work, and make it work right. If your project has need of temperature control, call Aqua Logic. TEMPERATURE CONTROLLERS Aqua Logic digital temperature controllers can be used in a variety of applications where a device needs to be turned on / off based on temperature rise or fall. The Single Stage controller operates on one device, either a chiller (fan) or a heater. The Dual Stage controller can be connected to both a chiller and heater, but only allows one device to be on at a time. A three-button touch keypad selects Degrees F or C, set point temperature, differential and operating mode (heating or cooling). A keypad lockout provides tamperproof protection and EEPROM memory retains control settings during power outages. The NEMA 4X enclosure is rated watertight for outdoor use. This temperature controller out performs others costing substantially more. Temperature range for the controller is from -30 to 220 F (-22 to 105 C). The differential adjustment range is 1 to 30 F. Power cord lengths from the controller to the power supply and from the controller to the device being controlled are 40 inches (1 m) each. The temperature sensor probe is encapsulated in titanium making it completely waterproof for both fresh water and saltwater environments. Shipment Dimensions: * Weight: 2.4 lb * Height: 10 in * Width: 9.9 in * Depth: 3 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Credit Card charge. http://www.saltwatereddies.com/content-product_info/product_id-2119/aqua_logic_dual_digital_temperature_controller_115v.html http://www.saltwatereddies.com/images/products/alogic_dual_controller_temp.jpg http://www.saltwatereddies.com/content-product_info/product_id-2119/aqua_logic_dual_digital_temperature_controller_115v.html Digital Sea Water Refractometer, Hanna. HANNA's HI 96822 Digital Refractometer is a rugged portable, water resistant device that utilizes the measurement of the refractive index to determine the salinity of natural and artificial seawater, ocean water or brackish intermediates. The HI 96822 benefits from HANNA's years of experience as a manufacturer of analytical instruments. This digital refractometer eliminates the uncertainty associated with mechanical refractometers and is rugged and portable enough to be used at home, in the lab and out in the field. The HI 96822 is an optical device that is quick and easy to use. After a simple user calibration with distilled or deionized water, a seawater sample can be introduced into the sample well. Within seconds, the refractive index and temperature are measured and converted into one of 3 popular measurement units: Practical Salinity Units (PSU), Salinity in parts per thousand (ppt), or Specific Gravity (S.G. (20/20)). All conversion algorithms are based upon respected scientific publications using the physical properties of seawater (not sodium chloride). Temperature (in C or F) is displayed simultaneously with the measurement on the large dual level display along with icons for Low Power and other helpful message codes. Shipment Dimensions: * Weight: 1.5 lb * Height: 10 in * Width: 6 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-2107/digital_sea_water_refractometer_hanna.html http://www.saltwatereddies.com/images/products/digital_sea_refractometer.jpg http://www.saltwatereddies.com/content-product_info/product_id-2107/digital_sea_water_refractometer_hanna.html Simultaneously controls up to 4 powerheads/pumps. Features 3 adjustable and 1 static outlet, 8 user selected day modes, night mode, feed mode, test mode, and a cycle range adjustment dial. Night mode comes on automatically when the built-in light sensor detects darkness and returns to day mode when the sensor detects daylight. During feed mode all pumps are shut off for a 10-minute period. Pressing the button again manually returns the Wave Creator to normal operation. Test mode turns each pump on for 2 seconds and automatically returns the Wave Creator to normal operation after 3 test cycles. The cycle range adjustment allows the user to change the duration of time the powerheads stay on from 30 seconds to 30 minutes. Power Consumption: 2 Watts. Max Load: 5 Amps. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1752/wave_creator_wavemaker.html http://www.saltwatereddies.com/images/products/Wave Creator Wavemaker.jpg http://www.saltwatereddies.com/content-product_info/product_id-1752/wave_creator_wavemaker.html Red Sea CO2 Reactor 500. Rated for aquariums up to 125 gallons. This fully adjustable, power driven, super compact CO2 reactor will simply and efficiently maintain the desired level of CO2 in a wide range of planted aquariums. The turbulent flow CO2/water interface inside the reactor ensures almost complete dissolving of available CO2 while non-dissolvable gases are gently vented to the water surface. Includes adjustable 65 gph pump. Dimensions: 3.75-inches x 1.6-inches x 2.2-inches (LxWxH). Shipment Dimensions: * Weight: 0.85 lb * Height: 7 in * Width: 5 in * Depth: 3 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1677/red_sea_co2_reactor_500.html http://www.saltwatereddies.com/images/products/Co2_reactor_Red_Sea.jpg http://www.saltwatereddies.com/content-product_info/product_id-1677/red_sea_co2_reactor_500.html HANNA Instruments Nitrate Photometer with 555 nm LED, Low Range Nitrates are present in nature as a result of decomposition of organic microorganisms or due to their use as fertilizers. Nitrates reduce to nitrites, which in turn easily combine to form substances dangerous to man. A maximum level of 45 mg/L is established as a worldwide guideline for nitrate concentration in water. In Europe, the maximum consented level of nitrates in potable water is 50.0 mg/L, while in the USA the EPA has established a guideline for the maximum level of nitrate nitrogen of 10 mg/L (NO--N), which corresponds to 45.0 mg/L of nitrates. The HANNA solutions are HI 93728 and HI 93828, hand held meters suited for field measurement. Reading procedures have been made as simple as possible to allow everyone to perform accurate nitrate measurements. The kit provides you with all you need for field measurement: photometer, reagents and apparatus perfectly fitted in a rugged carrying case HI 93728 reads nitrogen nitrate from 0 to 30 mg/L (NO--N); multiply the readout by a factor of 4.43 and you can read up to 133 mg/L of nitrate (NO-). HI 93828 reads nitrate directly in mg/L of NO-, from 0 to 100 mg/L. With a normal 9V battery you will be able to get more than 300 measurements. The auto shut-off feature (after 10 minutes of non-use) guarantees a long battery life. Range 0.0 to 30.0 mg/L (NO--N) Resolution 0.1 mg/L Accuracy 0.5 mg/L 10% of reading Light Source LED 555 nm Light Life Life of the instrument Light Detection Silicon Photocell Battery Type / Life 1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use Environment 0 to 50C (32 to 122F); RH max 95% non-condensing Dimensions 180 x 83 x 46 mm (7.1 x 3.3 x 1.8") Weight 290 g (10 oz.) Method Adaptation of cadmium reaction method. The reaction between nitrate-nitrogen and the reagent causes an amber tint in the sample HANNA instruments, a world leading manufacturer of analytical instrumentation, has a network of 40 subsidiaries in 32 countries worldwide and offers over 3000 products to its customers. HANNA is headquartered in Woonsocket, RI. Shipment Dimensions: * Weight: 6 lb * Height: 14 in * Width: 6 in * Depth: 4 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1913/nitrate_photometer_with_555_nm_led.html http://www.saltwatereddies.com/images/products/nitrate_photometer_tests_.jpg http://www.saltwatereddies.com/content-product_info/product_id-1913/nitrate_photometer_with_555_nm_led.html Allows an AquaController to control and vary the intensity of LED modules for a realistic moon-cycle simulation. Programmed to dim the LED's in phase with the true lunar cycle and is sold as a complete package with 4 LED modules. Each LED module includes a high intensity LED bulb with 100+ degree wide angle lense to provide maximum tank coverage. The direct wired connection is very reliable and eliminates interference problems caused by noisy electronic ballasts and other equipment. User configurable maximum LED intensity and control address. Compatible with AquaController Jr., AquaController 3 and AquaController 3 Pro. Includes mounting holes on both Lunar Simulator and LED modules. California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1735/dimmable_lunar_simulator_w_4_led_s.html http://www.saltwatereddies.com/images/products/NeptuneMoonController.jpg http://www.saltwatereddies.com/content-product_info/product_id-1735/dimmable_lunar_simulator_w_4_led_s.html Moonlight timer / controller. Provides complete lunar cycle for moonlights as well as a digital timer function for the daylight lights. Digital display with front panel digital controls. Dual channel lighting timer will handle dual 400 watt lights per channel. Wave machine control is designed to operate the wave machine part # WM-CAWAVE in conjunction with the moonlight timer to provide wave currents in association with the lunar cycle. Shipment Dimensions: * Weight: 2.55 lb * Height: 10 in * Width: 8 in * Depth: 3 in California and Washington State Sales Tax Notice: In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout. http://www.saltwatereddies.com/content-product_info/product_id-1474/moonlight_timer_controller.html http://www.saltwatereddies.com/images/products/Moontimer.jpg http://www.saltwatereddies.com/content-product_info/product_id-1474/moonlight_timer_controller.html