<?xml version="1.0" encoding="UTF-8" ?>

<rss version="2.0">
<channel>
<title>Saltwater Eddies, LLC &gt; Auto Top Off</title>
<description>Saltwatereddies.com sell Dosing Pumps for multiple reef tank dosing of additives or reef tank dosing systems. Shop online securely using PayPal or Google Checkout.</description>
<link>http://www.saltwatereddies.com/content-categories/cat-496/auto_top_off.html</link>
<lastBuildDate>Sun, 05 Feb 2012 23:19:17 -0600</lastBuildDate>
<language>en</language>

<item>
	<title>Elos OsmoController Digital Water Level Controller</title>
	<description>UPC: 8027876011130
Elos OsmoController Digital Water Level Controller

The entirely new OSMOCONTROLLER Digital uses a patent pending sensor with no moving parts as the first measure of the water level in the SUMP. Most other systems will use multiple float switches or sensors to act as back up to the initial float switch, elos does not. We believe the float switch or sensor will always be the weak link as it is usually a moving part and/or in direct contact with the water, most of the time. To provide an adequate fail-safe the OSMOCONTROLLER Digital uses a small microprocessor in combination with our patent pending sensor to control the pump and monitor the top off of your system. In the event of a fault such as an empty reservoir, a damaged pump or kinked tube, the microprocessor will recognize this and a red alarm LED will indicate the problem and stop pumping until the problem is fixed and the controller can be reset. The OSMOCONTROLLER Digital also has a manual top off button that can be used to use the system as a pump for occasional water changes and to fill a container with RO/DI water easily.

 

The set up of the OSMOCONTROLLER Digital is very simple. It works with most sumps without the need for programming and with our sensor design has a built in buffer for waves and small changes in the sump that will normally cause a top off system to unnecessarily top off, which will shorten the useable life of the top off pump.

Key Benefits of the OSMOCONTROLLER Digital:

    * No moving parts
    * Very easy setup. (System runs a 5 minutes self-diagnostic test when it is first plugged in.)
    * Maintains a very accurate level, very important in marine systems for a stable salinity level when keeping delicate animals.
    * Adapts to most aquarium/sump sizes automatically.

Ca and WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-2565/elos_osmocontroller_digital_water_level_controller.html</link>
	

	<image>
	       <title>Elos OsmoController Digital Water Level Controller</title>
		<url>http://www.saltwatereddies.com/images/products/Elos_OsmoController_Digital.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-2565/elos_osmocontroller_digital_water_level_controller.html</link>
	</image>
	

</item>


<item>
	<title>SpectraPure LiterMeter 3</title>
	<description>SpectraPure LiterMeter 3:


The new LiterMeter III is an automatic precision dosing system for the aquarium and horticulture industry. Three independent programs control one built-in pump and up to two external pumps (sold separately). Perform 2-way water changes, in addition to eliminating the manual drudgery of dosing Kalkwasser, trace elements, or topping off evaporated water. Quiet operation, auto-calibration, and virtually maintenance-free. 

Calcium maintenance and alkalinity control are essential for a healthy reef tank. SpectraPures LiterMeter III eliminates the manual drudgery of dosing Kalkwasser, trace elements, or topping off evaporated water. Kalkwasser replenishment, to be most effective, should be added to your aquarium slowly and consistently to avoid precipitation of calcium carbonate. The LiterMeter III automatically and reliably performs this task for you.

The LiterMeter III offers features found only on expensive laboratory pumps. Built-in calibration features eliminate the guesswork of uncalibrated competitive units. Unlike noisy industrial metering pumps sold to the aquarium trades, SpectraPures LiterMeter III was specially designed for critical aquarium dosing and is so quiet you can use it in your living room. Superior three-roller direct-motor drive eliminates noisy gears and improves flow accuracy and tubing life. It can be run dry without damage, and pumps either from a draw height of 12 feet or to a delivery height of 60 feet.

Three independent programs control the internal pump, as well as two optional external pumps. The LM3-RPM is a LiterMeter III pump mounted in a small plastic box. The LM3-TCM (SP1095) is an optional level sensor that interrupts power to the LiterMeter III when a high water level is detected. The LM3-WXM (SP1093) combines an LM3-RPM (SP1091) and an LM3-TCM (SP1095) in one package, interrupting power only to that pump. See the Operations Manual for application examples.

Quietest pump on the market; excellent for reef tanks
One internal pump provided with unit, remote pumps optional
Fully automatic pump operation - Set it and forget it
Precision calibration feature eliminates guesswork
Dependable and virtually maintenance free
Self-priming and Anti-siphoning
Compact size and cool operation

Uses less than 6 Watts of power when operating
5 years warranty

Precision dosing system can be powered directly from a 12VDC battery
Highest quality precision dosing system - incomparable accuracy




Manufacturer Info 

SpectraPure Aquarium Supplies
SpectraPure was established in 1985 and is located in Tempe, Arizona, home of Arizona State University. SpectraPure is dedicated to excellence in the design and manufacture of water filtration and purification systems for household, commercial, laboratory and light industrial applications. Their product lines includes a full range of systems and equipment, including drinking water systems, water softeners, filtration systems, reverse osmosis units, RO/DI and deionization systems and many other technological innovations and water purification accessories. SpectraPure provides innovative, state-of-the-art solutions to water purity problems and applications.
Warranty 

Manufacturer`s Warranty: 5 years from date of purchase.

California Sales Tax Notice:CA orders Only please add 8.75% State Tax
California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-2483/spectrapure_litermeter_3.html</link>
	

	<image>
	       <title>SpectraPure LiterMeter 3</title>
		<url>http://www.saltwatereddies.com/images/products/SpectraPure-LiterMeter-3.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-2483/spectrapure_litermeter_3.html</link>
	</image>
	

</item>


<item>
	<title>SpectraPure U.P.L.C. Ultra-Precise Level Controller II</title>
	<description>SpectraPure Ultra-Precise ATO holds your tank's salinity constant while adding replacement water or Kalc in small doses. The pump can operate in either "fill mode" or "drain mode" when the water level changes. The Sensor Tube can be pre-set to operate with a minimal (0.1") change in water level up to a 4" difference. This calibration is saved even after a loss of power. 

The ATO runs on a ten-second cycle. The pump can be on for any number of seconds each cycle, including zero (always off) and ten (always on). After the Ultra-Precise ATO is powered up, use the UP and DOWN buttons to adjust the ON-time in 10% steps. (This value is also saved even after a loss of power). 

The pump used in the Ultra-Precise ATO is the same pump that is in the LiterMeter III , the leader in aquatic dosing for over 10 years. Now with our new improved, long life Peristaltic tubing. This is the quietist, most reliable Peristaltic Pump ever made. 

Quality that you can see, performance you won't believe.
Fully automatic operation - Can be programmed for "fill modeor drain mode"
New and Improved Pump. Highest quality and accuracy
High reliability metal LiterMeter III pump
Virtually maintenance free
No check valves to clog or seals to leak
Self-priming and anti-siphoning
Hi-limit float switch for fail-safe operation
High delivery pressure - over 40 psi
Compact size and cool operation
Kalkwasser and Chemical safe
No damage to the pump if run dry
Quiet operation and low power consumption
Complete system consumes less than 4 Watts when pump is on
Pump Flow Rate: Adjustable in 10% Steps up to 200 mL/min
Extended 5-year Warranty

Manufacturer Info 

SpectraPure Aquarium Supplies
SpectraPure was established in 1985 and is located in Tempe, Arizona, home of Arizona State University. SpectraPure is dedicated to excellence in the design and manufacture of water filtration and purification systems for household, commercial, laboratory and light industrial applications. Their product lines includes a full range of systems and equipment, including drinking water systems, water softeners, filtration systems, reverse osmosis units, RO/DI and deionization systems and many other technological innovations and water purification accessories. SpectraPure provides innovative, state-of-the-art solutions to water purity problems and applications.

California Sales Tax Notice:CA orders Only please add 8.75% State Tax
California customers will be charged actual sales tax reflecting their county's tax rate. The checkout page will not reflect the sales tax amount. This will be added to the final invoice.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-2484/spectrapure_u_p_l_c_ultra_precise_level_controller_ii.html</link>
	

	<image>
	       <title>SpectraPure U.P.L.C. Ultra-Precise Level Controller II</title>
		<url>http://www.saltwatereddies.com/images/products/SpectraPureUltra-Precise-Level-Controller.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-2484/spectrapure_u_p_l_c_ultra_precise_level_controller_ii.html</link>
	</image>
	

</item>


<item>
	<title>Elos System Water Level Osmocontroller 2</title>
	<description>Discontinued. 
Replaces with Osmocontroller Digital which is now EO3125

Using a sophisticated micro processed controlled system, the Elos Osmocontroller will ensure that no water will spill during the refill process, damaging the floor, cabinets or house furniture.

Ready for mounting, the Osmocontroller is supplied with: a sensor, glass housing, control unit, enclosed power supply and a low voltage pump.

The Osmocontroller will compensate the smallest amount of evaporated water and will automatically start the pump when the float switch is opened for at least 5 seconds, preventing undesired false starts.
      1 - low voltage controller
      1 - 110-220 volts / 12 volts power supply
      1 - low voltage pump
      1 - magnetic level switch
      1 - glass protection
      2 - suction cup
    * Automatic compensation of evaporated water
    * Practical, electronically controlled
    * Programmable times for safe operation
    * With retard-circuit to prevent false activation

Discontinued. 
Replaces with Osmocontroller Digital which is now EO3125

California and Washington State Sales Tax Notice: 
 In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-1812/elos_system_water_level_osmocontroller_2.html</link>
	

	<image>
	       <title>Elos System Water Level Osmocontroller 2</title>
		<url>http://www.saltwatereddies.com/images/products/EOS_auto_Top_Off.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-1812/elos_system_water_level_osmocontroller_2.html</link>
	</image>
	

</item>


<item>
	<title>JBJ A.T.O. Automatic Top Off System Water Level Controller</title>
	<description>A.T.O.Automatic Top Off System Water Level controller

Tired of lifting heavy buckets to refill sumps or tanks due to evaporation?

There is finally a professional grade product that automates refilling evaporated water. The All-New A.T.O. (Automatic Top Off) device is the most advanced water level controller system on the market. Lifting heavy buckets and spilling water is now a thing of the past. Maintaining stable salinity and specific gravity are no longer a problem since the A.T.O. will refill as soon as the water level drops. The A.T.O. will keep all salt levels at consistent parameters, ensuring an optimal environment for your tank inhabitants.

Advanced Features

Float Sensors
The A.T.O. is equipped with (2) float sensors that activate within seconds when your water level drops and automatically refills your sump or tank until it reaches your desired set point. Each float sensor has been designed with an exterior guard preventing snails &amp; hermit crabs from attaching to the sensors.

Electronic Controller Module
Our state-of-the-art electronic controller allows for (2) modes of operation with a total of (3) different set up scenarios, allowing you more choices for installation for your unique set up. Our compact controller also incorporates a visible LED panel + our innovative Audible Signal alerts when in operation mode.

Linkable Brackets
Your professional kit includes commercial grade "Linkable Brackets" that can easily be adjusted to meet your height requirements, and securely positions your float sensors. Many competing brands use inferior suction cups that are temporary that can lead to disastrous water spillage.

Pump Safety Protection
The A.T.O. automatically stops power to your return pump in you reservoir, in the event that your reservoir is low on water. This safety feature prevents pumps from running dry and failing.


Specifications

 

Advanced Features

Float Sensors
The A.T.O. is equipped with (2) float sensors that activate within seconds when your water level drops and automatically refills your sump or tank until it reaches your desired set point. Each float sensor has been designed with an exterior guard preventing snails &amp; hermit crabs from attaching to the sensors.

Electronic Controller Module
Our state-of-the-art electronic controller allows for (2) modes of operation with a total of (3) different set up scenarios, allowing you more choices for installation for your unique set up. Our compact controller also incorporates a visible LED panel + our innovative Audible Signal alerts when in operation mode.

Linkable Brackets
Your professional kit includes commercial grade "Linkable Brackets" that can easily be adjusted to meet your height requirements, and securely positions your float sensors. Many competing brands use inferior suction cups that are temporary that can lead to disastrous water spillage.

Pump Safety Protection
The A.T.O. automatically stops power to your return pump in you reservoir, in the event that your reservoir is low on water. This safety feature prevents pumps from running dry and failing.

Specifications:

    * Item #: Water Level Controller System
    * Model: A.T.O.
    * Purpose: To automatically replenish water lost through evaporation
    * Power Supply for Pump Capacity: 2 Amps
    * Dimensions (L x W x H): 1.5" x 2.75" x 4"
    * Weight: 2 lbs
    * Pump: (Not Included)

FAQ

Q: How large of a pump can I plug into the A.T.O.?
A: The A.T.O. receptacle will handle pumps up to 2amp capacity.

Q: Can the Audible Alert be turned off?
A: Yes, it can be turned off if the "Speaker Buzzer" is removed from the circuit board.

Q: Why does my A.T.O. automatically shut off after a few minutes of operation even though the water level has not reached the float sensor?
A: All A.T.O. Controllers have a factory "Float Fail-Safe" duration time period of 3 minutes and 45 seconds of operation before power to the pump is turned off. The Pump LED will glow but power to the pump will not be turned on. This feature was designed to act as a safety mechanism in the unlikely event the float sensor(s) failed or if something was to get stuck in between the sensor(s). You will have to reset the float sensor(s) to restart the controller.

Q: Can I adjust the "Float Fail-Safe" duration time period?
A: Yes, the duration time can be extended to 14 minutes of operation. (Please see instructions below on adjustment.)

How to Adjust the "Float Fail-Safe" Time Duration

Step1:
Unscrew back panel off of controller (4) total screws 	Adjusting Dial is located towards the top in "Blue Color"

Step2:
Use a Phillips screwdriver and turn the dial COUNTER CLOCKWISE until it locks. This setting will give a operation mode time of approximately 14 minutes or until correct water level is reached.

Manufacturer Info

JBJ is a top-of-mind brand name in freshwater and saltwater aquarium supplies. The company is committed to innovation and manufacturing only the absolute highest quality equipment. JBJs philosophy is "to create products that provide extra value" to hobbyists. JBJ produces hundreds of aquarium products including lights, filters, heaters, UV sterilizers, wavemakers and top-off systems. The company is best known for their affordable line of Arctica chillers and the best-selling Nano Cube aquarium series. We carry the gamut of JBJ products and accessories and are happy to provide you free technical support while youre setting up your new equipment.

Warranty
6 month manufacturer warranty

In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-1814/jbj_a_t_o_automatic_top_off_system_water_level_controller.html</link>
	

	<image>
	       <title>JBJ A.T.O. Automatic Top Off System Water Level Controller</title>
		<url>http://www.saltwatereddies.com/images/products/Jbj_Auto_Top_off.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-1814/jbj_a_t_o_automatic_top_off_system_water_level_controller.html</link>
	</image>
	

</item>


<item>
	<title>Aqua Medic Niveaumat SP3000 auto top off</title>
	<description>The Niveaumat SP 3000 will automatically top off evaporated water in fresh and salt water aquariums. It comprises an Aqua Medic SP3000 Dosing Pump with a directly connected float switch. The float switch is installed in the aquarium or filter tank at the desired level using its holding unit. As the level drops the SP 3000 automatically tops off the tank with water from a reservoir (reservoir not supplied).



WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-1614/aqua_medic_niveaumat_sp3000_auto_top_off.html</link>
	

	<image>
	       <title>Aqua Medic Niveaumat SP3000 auto top off</title>
		<url>http://www.saltwatereddies.com/images/products/Aqua_Medic_Top_Off.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-1614/aqua_medic_niveaumat_sp3000_auto_top_off.html</link>
	</image>
	

</item>


<item>
	<title>Reef Fanatic Level Controller w/ Dual Float Sensors</title>
	<description>Automate your aquarium water top off with our water level controller. Since safety is our number one concern, we include two float switch sensors with our water level controller. The first float switch sensor triggers the feed pump (sold separately) to maintain the desire water level. The second float switch sensor ensures dependability and offers overflow protection. Our water level controller can also be used to protect pump from run dry.

Comes with:
 Two detachable float switch sensors
 Low power consumption: 2 Watts
 Control Power Output: Maximum 2 Amps
 See user`s manual for different setup options

California and Washington State Sales Tax Notice: 
 In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-1817/reef_fanatic_level_controller_w_dual_float_sensors.html</link>
	

	<image>
	       <title>Reef Fanatic Level Controller w/ Dual Float Sensors</title>
		<url>http://www.saltwatereddies.com/images/products/Level_Controller_Kit.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-1817/reef_fanatic_level_controller_w_dual_float_sensors.html</link>
	</image>
	

</item>


<item>
	<title>Spectra Pure Power Liquid Level Controller</title>
	<description>Power Liquid Level Controller, Spectra Pure. SpectraPure Power Liquid Level Controller uses a sensitive air pressure switch to energize or de-energize an AC outlet, which can be used to switch a power head or a 115 volt pump up to 3 Amps continuous duty. The unit can be set to turn a pump on or off with changing water level and is extremely useful for continuous water change systems. For automatic replenishment of evaporated liquid on systems which require AC electrical control. Controls up to 3 Amp continuous duty pumps and other 115 volt power heads. Extremely useful for continuous water change systems &amp; other level control applications. 5 feet of Remote sensor tubing provided.

Shipment Dimensions:

    * Weight: 3.5 lb
    * Height: 8 in
    * Width: 8 in
    * Depth: 6 in

California and Washington State Sales Tax Notice:
In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-2081/spectra_pure_power_liquid_level_controller.html</link>
	

	<image>
	       <title>Spectra Pure Power Liquid Level Controller</title>
		<url>http://www.saltwatereddies.com/images/products/SpectraPure_Power_ Liquid_Level_Controller.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-2081/spectra_pure_power_liquid_level_controller.html</link>
	</image>
	

</item>


<item>
	<title>Tunze Osmolator Universal 3155 Top Off</title>
	<description>TUNZE OSMOLATOR UNIVERSAL 3155 - auto top-off system

Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for cabinet filter plants in TUNZE Comline filters or on the edge of the sump.

This osmotic regulator can also be used in TUNZE SYSTEM cabinet filter plants. The sensors can be stuck to glass surfaces or can be fitted directly to the edge of the tank.


California and Washington State Sales Tax Notice: 
 In most cases CA, and in all cases WA customers will be charged actual sales tax reflecting their county's tax rate. The order checkout may not always reflect this sales tax amount in all cases. In this event, it will be added to the final invoice where applicable, or an invoice will be sent via PayPal or Google Checkout.</description>
	<link>http://www.saltwatereddies.com/content-product_info/product_id-1818/tunze_osmolator_universal_3155_top_off.html</link>
	

	<image>
	       <title>Tunze Osmolator Universal 3155 Top Off</title>
		<url>http://www.saltwatereddies.com/images/products/Tunze_Auto_Top_Off.jpg</url>
		<link>http://www.saltwatereddies.com/content-product_info/product_id-1818/tunze_osmolator_universal_3155_top_off.html</link>
	</image>
	

</item>


</channel>
</rss>


